Main > Everything Else
wiring up a 60 in 1 multiboard?
jspicher:
Howdy guys,
I got myself a few items from jamma boards to built a 60 in 1 multi-board cabinet but l have a few questions as to how l'd wire and power this thing.
Can anyone give me a little tutorial, maybe even video on what all l'd need and how l'd go about hooking this thing up?
Here's what l bought:
1x 60 in 1 board
1x Switching Power Supply (model WEI-YA)
1x Jamma Harness
So here are my questions:
1.) How do l run power to the board? -- Would it be possible to power it with a regular PC power supply - if so what kind would l look for?
2.) What is the proper way to connect the jamma harness to the board? It could go on either way, so l'm not sure what is the top, and what is the bottom.
3.) Once the jamma harness is connected, how do l know which wire is for which button?
lilshawn:
most of those xx-in-1 boards have a computer molex plug. so either jump an atx to power it or hack off a plug and wire it up to the weiya supply
or power it through the JAMMA
all you need is +5 +12 and ground.
your xx-in-1 board manual will show you which wires are what. JAMMA wires are all he same.
jspicher:
--- Quote from: lilshawn on August 19, 2012, 08:54:03 pm ---jump an atx to power it
--- End quote ---
How do l do that?
Nephasth:
--- Quote from: jspicher on August 20, 2012, 01:51:44 pm ---
--- Quote from: lilshawn on August 19, 2012, 08:54:03 pm ---jump an atx to power it
--- End quote ---
How do l do that?
--- End quote ---
--- Quote from: lilshawn on August 19, 2012, 08:54:03 pm ---or power it through the JAMMA
--- End quote ---
^^ Just do this.
jspicher:
--- Quote from: Nephasth on August 20, 2012, 01:56:40 pm ---
--- Quote from: jspicher on August 20, 2012, 01:51:44 pm ---
--- Quote from: lilshawn on August 19, 2012, 08:54:03 pm ---jump an atx to power it
--- End quote ---
How do l do that?
--- End quote ---
--- Quote from: lilshawn on August 19, 2012, 08:54:03 pm ---or power it through the JAMMA
--- End quote ---
^^ Just do this.
--- End quote ---
Can someone give me a little more detail on how l would do that though? I can't find any tutorials or videos that would outline it for someone who's never done something like this before.
Navigation
[0] Message Index
[#] Next page
Go to full version