Main > Main Forum
Replace old IL Joystick (Diagonals not working)
kluber:
Hi, I have this IL joystick, but in SF2 I cant do diagonals, jump forward or backwards is very hard and ken or ryu's hadoken nearly impossible. But in MK for example, I can do the diagonals with no problem.
Is it something wrong with the joystick? Or I just need a new one?
If so, can you advice me on a not very expensive one? thanx (I need to keep the jamma interface.)
PL1:
If you can hit the diagonals in MK, it means the switches are working.
You might POSSIBLY want to try tuning the switches like this thread to make the diagonals easier.
Scott
kluber:
Do you mean bending the small irons in the switches towards the joystick?
I thought on that but wasnt quite sure would make a difference.
PL1:
Yes, a bend of a few degrees after the point where it touches the small white nub, just like RandyT describes.
Scott
kluber:
Well, i've bended them, no luck... Ryu still performs no Hadouken.
Here's how they are:
I believe that the actual hole in the CP is not allowing the joystick to reach the limits of its motion, I'll try centering it better, could that be it?