Main > Main Forum

Wiring Suzo-Happ Metal Coin Mech

Pages: << < (2/2)

mcseforsale:

Or, you could just get a GGG coin button and put it over the area where the coin slot/return/bezel is...it was in another thread here.


http://forum.arcadecontrols.com/index.php/topic,121793.0.html

See if those measurements are the same, then re-sell/return your mech and you'll be ahead.  (although I needed a coin mech in mine...it's more authentic).

AJ

Seith:


--- Quote from: mcseforsale on August 07, 2012, 09:40:53 am ---Or, you could just get a GGG coin button and put it over the area where the coin slot/return/bezel is...it was in another thread here.


http://forum.arcadecontrols.com/index.php/topic,121793.0.html

See if those measurements are the same, then re-sell/return your mech and you'll be ahead.  (although I needed a coin mech in mine...it's more authentic).

AJ

--- End quote ---

Yeah, I saw those... coin mech is definitely the route I want to take, although I will also be throwing a cherry microswitch behind the coin return button for coining up as well.

Pages: << < (2/2)

Go to full version