Main > Project Announcements
Scratch - Marvel v Capcom: Revolution - Complete with tour video
rablack97:
HMMMM, not sure i'm feeling that kickplate update on the sticks, looks like tire tread for a monster truck theme.
Looks a little too bold, the actual kickplate graphic sticks out more to me than the actual sticks....
But you know me, that's just my opinion....
:)
griffindodd:
SO here's a question to the top mounting peeps here that have acrylic on their CP
How did you cut the circles for your trackball and your sticks. You can't use the wood panel as a router jig for those holes, wondering what the best approach is to get these dead on.
I was thinking of using the actual housing of the trackball as a router guide, but there's a lip around the ball so that wouldn't make the hole big enough for the lip to fit through the acrylic
rablack97:
You should have cut the basic holes hole before your cut out the shape of the trackball and the base of the sticks.
I cut the 1 1/8 hole for the sticks and the 3" hole for the trackball, then i routed my acyrlic using those holes as a jig. Then i cut out the shapes of the stik base and the trackballs
You might have to do some reverse engineering now.
Like so....
griffindodd:
I guess I can always just make a template from my original line art just for those three cuts. Do the acrylic from my existing CP wood then line that up on top of the new template to do the trackball and sticks.
Beginners boo boo's
rablack97:
You'll figure it out Merlin..... :applaud: :applaud:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version