Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Jennifers "HOT" new pin....  (Read 8901 times)

0 Members and 2 Guests are viewing this topic.

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Jennifers "HOT" new pin....
« on: July 19, 2012, 01:13:30 am »
        Just thought Id share some pics of my new project
« Last Edit: September 11, 2017, 05:40:42 pm by jennifer »

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #1 on: July 19, 2012, 01:16:51 am »
    Hey Saint where is the fire hose
« Last Edit: September 11, 2017, 05:41:22 pm by jennifer »

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #2 on: July 19, 2012, 01:18:51 am »
   OMG
« Last Edit: September 11, 2017, 05:41:57 pm by jennifer »

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #3 on: July 19, 2012, 01:21:59 am »
   High speed 2,
« Last Edit: September 11, 2017, 05:42:39 pm by jennifer »

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #4 on: July 19, 2012, 01:23:39 am »
    No smoking please
« Last Edit: September 11, 2017, 05:43:17 pm by jennifer »

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10176
  • boom
    • Arcade Madness
Re: Jennifers "HOT" new pin....
« Reply #5 on: July 19, 2012, 09:41:55 am »
 :blowup:

Why would you torture yourself like that?  wow...

bleargh

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 359
  • ribbit...
Re: Jennifers "HOT" new pin....
« Reply #6 on: July 19, 2012, 10:58:22 am »
"Hot" is an understatement... I think that ones more like "crispy".

And you're actually going to take that on as a restoration <cough>rebuild</cough> ?

TopJimmyCooks

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2093
Re: Jennifers "HOT" new pin....
« Reply #7 on: July 19, 2012, 11:14:25 am »
I'm a major glutton for punishment and even I'd pause to reflect before letting that in the shop.  Is anything saveable?  boards?  harness?  those ribbon cables look like they're toasted to perfection. 

Is the project to gut it and make a virtual pin? 

MameMaster!

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2055
  • Engage number one!
    • Mame Invaders!
Re: Jennifers "HOT" new pin....
« Reply #8 on: July 19, 2012, 12:07:23 pm »
Maybe her "project" is to BURY it?  :dunno
Seriously. Will it fit in my basement or what?

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #9 on: July 19, 2012, 01:34:33 pm »
    It was part of a insurance thing (came with 7 other games) Those unfortunately were boxes of ashes....This one however, shouldn't be so bad.
The playfield isn't scorched, and the wiring is salvageable, I dont think Jen would ever trust those boards again though, even should I get them to fire up.
     I have followed the advancements on the VP scene, Some amazing builds to be sure, But jennifer still loves her original cabs, even in this cond. it would
break my heart to see it converted....Not counting the ash boxes, This one puts me at
« Last Edit: September 11, 2017, 05:47:03 pm by jennifer »

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10176
  • boom
    • Arcade Madness
Re: Jennifers "HOT" new pin....
« Reply #10 on: July 19, 2012, 02:52:23 pm »

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #11 on: July 19, 2012, 06:02:01 pm »
#2 (in progess) Galaxy....The playfield is being preped for the new art
« Last Edit: September 11, 2017, 05:43:53 pm by jennifer »

Pinball Wizard

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 482
Re: Jennifers "HOT" new pin....
« Reply #12 on: July 20, 2012, 10:36:21 am »
Holy..... I've seen some amazing restorations on fire damaged pinball machines, but man! What are you going to do with the baords in the backbox?
Where's my gold star :P

TopJimmyCooks

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2093
Re: Jennifers "HOT" new pin....
« Reply #13 on: July 20, 2012, 10:40:32 am »
How are you going to re-art the Galaxy pf?  overlay?

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #14 on: July 20, 2012, 02:17:00 pm »
The boards in the high speed will get replaced as Jennifer can find them, (may even have a set down in the storage) The ones I cant obtain will get repopulated
I spose ,Its going to be a long painful project to be sure. This isnt my first one however these are the kind of machines I save.
      The Galaxy.... The PF on the bench is getting an overlay and clear, Its sister PF is getting touched up with a micron.

TopJimmyCooks

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2093
Re: Jennifers "HOT" new pin....
« Reply #15 on: July 20, 2012, 03:05:07 pm »
Who's printing overlays for stuff like that?  or is it something someone did a run of in the past?  I'm interested because I want to re-art a machine one of these days. 

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #16 on: July 20, 2012, 03:36:50 pm »
Somebody in the artwork section Im guessing.... They quit talking to Jennifer a long time ago....I will say here however, Scan EVERYTHING, And a plot/cutter
is a must for cutting all those holes.









































jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #17 on: July 20, 2012, 08:08:30 pm »
#3.... Rock-ola 440, This was a fire victim too, the whole left side has been replaced...Awaiting reassembly now that the hard part is over.                              This one probably should have had a thread of its own, sorry no before pics
       
« Last Edit: September 11, 2017, 05:44:37 pm by jennifer »

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #18 on: July 22, 2012, 05:23:27 pm »
#4 - 96..... random shots out back, The speakers (Seburg) are huge, so Jennifer counts them too
« Last Edit: September 11, 2017, 05:45:08 pm by jennifer »

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10176
  • boom
    • Arcade Madness
Re: Jennifers "HOT" new pin....
« Reply #19 on: July 22, 2012, 05:35:42 pm »
 :o

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #20 on: July 22, 2012, 08:21:42 pm »
You wanted pics so whatever.....There not all broke either, some are quite nice. So bla,bla,bla....
« Last Edit: September 11, 2017, 05:47:44 pm by jennifer »

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #21 on: July 22, 2012, 08:53:29 pm »
 What do you recommend then, Maybe I should slop on some mop and glow and call them done?
« Last Edit: July 23, 2012, 02:21:52 am by jennifer »

bleargh

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 359
  • ribbit...
Re: Jennifers "HOT" new pin....
« Reply #22 on: July 23, 2012, 02:35:07 am »
What do you recommend then, Maybe I should slop on some mop and glow and call them done?

I recommend that you pack up a few of those, bring them over, and drop them off here so they can get some regular playtime and the loving that they deserve.

 ;)

Well Fed Games

  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1882
  • Delicious!
Re: Jennifers "HOT" new pin....
« Reply #23 on: July 23, 2012, 08:56:34 am »
Thanks for the pics, a lot of cool stuff there.  :cheers:
Completed projects: Pac bartop (Plug & Play), 30th Anniversary Pac cab (MAME), Point Blank (PS1), Centipede (arcade hardware- light restore), VS. Super Mario Bros (arcade hardware- light restore) Tetris Cocktail (SNES), Arcade Classics upright (60-in-1, then MAME), Multi-Raiden (arcade hardware). Pac Man vs.(Gamecube),

Working on: Pinball Re-theme, Homebrew arcade arena shooter

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #24 on: July 23, 2012, 01:49:20 pm »
None of these machines are being neglected, They are all slated for high level restorations. Some were destined for the graveyard, others put away back
in the day. As for playing a game at a moments notice....Not going to happen here, Jennifer doesnt like playing games anymore, Its all about preserving
the history for future generations, and just saving some old machine....BTW Well fed games, Thank you.

























unkpinball

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
Re: Jennifers "HOT" new pin....
« Reply #25 on: August 09, 2012, 09:37:38 am »
Takes a lot of work, dedication, initiative and perseverance to do what you do, keep up the good work!  :applaud:

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Online Online
  • Posts: 6048
  • I break stuff...then fix it...sometimes
Re: Jennifers "HOT" new pin....
« Reply #26 on: August 13, 2012, 11:17:40 pm »
welp time to start a "projects-we-never-finished-but-still-plan-on-finishing-someday-pictures-of-it-all-piled-up" thread  ;D

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #27 on: August 14, 2012, 04:20:42 am »
   And what better place than in the middle of Jennifers thread.....That is so very convenient, now I dont have to document this (or any)
projects, or give back to the byoac community. ( nevermind the picture that was part of a update) So there you guys go this thread is
all yours.
« Last Edit: September 11, 2017, 05:48:22 pm by jennifer »

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12846
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Jennifers "HOT" new pin....
« Reply #28 on: August 14, 2012, 07:22:34 am »
I'm just curious why you type in the 3rd person perspective
2014 Standup UCA Runner Up
2015 Restoration UCA Winner
2016 thomas_surles choice award
2017 International Evil Buddhist Award

Latest project - Dayclona USA 2 :
http://forum.arcadecontrols.com/index.php/topic,155515.0.html

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Online Online
  • Posts: 6048
  • I break stuff...then fix it...sometimes
Re: Jennifers "HOT" new pin....
« Reply #29 on: August 14, 2012, 02:40:24 pm »
Borg.

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10176
  • boom
    • Arcade Madness
Re: Jennifers "HOT" new pin....
« Reply #30 on: August 14, 2012, 02:41:54 pm »

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Online Online
  • Posts: 6048
  • I break stuff...then fix it...sometimes
Re: Jennifers "HOT" new pin....
« Reply #31 on: August 14, 2012, 02:48:58 pm »
Borg.

Borked?


Borg.



Resistance is futile.


Jennifer will refer to her in the third person but lilshawn will refer to me in the First person making everything by all accounts as to who is talking to who...because it will sound like I'm taking about lilshawn when he's actually talking about me.

Le Chuck

  • I want a new quote!
  • Wiki Contributor
  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5437
  • Yots is an Arrogant Tallywacker
Re: Jennifers "HOT" new pin....
« Reply #32 on: August 14, 2012, 02:50:33 pm »
I'm just curious why you type in the 3rd person perspective

It helps PBJ remember that she's the dual when he's posting as Jennifer.  >:D

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10176
  • boom
    • Arcade Madness
Re: Jennifers "HOT" new pin....
« Reply #33 on: August 14, 2012, 02:51:31 pm »
I know what a borg is...  I'm saying "borked".

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Online Online
  • Posts: 6048
  • I break stuff...then fix it...sometimes
Re: Jennifers "HOT" new pin....
« Reply #34 on: August 14, 2012, 02:57:25 pm »
badum ching?

Le Chuck

  • I want a new quote!
  • Wiki Contributor
  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5437
  • Yots is an Arrogant Tallywacker
Re: Jennifers "HOT" new pin....
« Reply #35 on: August 14, 2012, 03:00:39 pm »
I'm just happy I got to use that version of "dual" in a sentence :duckhunt

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3958
  • 8 Bit...16 Shy
Re: Jennifers "HOT" new pin....
« Reply #36 on: August 14, 2012, 04:06:12 pm »
I'm just curious why you type in the 3rd person perspective

WP34 was wondering the same thing.   

Actually my teenage daughter does the same thing.  Drives me bananas.

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #37 on: August 15, 2012, 02:55:42 pm »
   Do you guys feel better now....You just make me want to cry. :cry:

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Online Online
  • Posts: 6048
  • I break stuff...then fix it...sometimes
Re: Jennifers "HOT" new pin....
« Reply #38 on: August 15, 2012, 07:28:40 pm »
   Do you guys feel better now....You just make me want to cry. :cry:


your assimilation makes me sad (T~T)

Le Chuck

  • I want a new quote!
  • Wiki Contributor
  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5437
  • Yots is an Arrogant Tallywacker
Re: Jennifers "HOT" new pin....
« Reply #39 on: August 15, 2012, 07:47:37 pm »
Are you still crying?

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 17719
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Jennifers "HOT" new pin....
« Reply #40 on: August 15, 2012, 08:32:53 pm »
Jennifer just needs to tell these guys to STFU.  :cheers:
***Build what you dig, bro. Build what you dig.***

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #41 on: August 16, 2012, 12:15:00 am »
     Jennifer likes that....Ya STFU off, (dumbheads). Anyway back to the Getaway...That pic. is an aftermarket translite (Got one for my B/day)
Its a little naughty, not original and the speed sign is on the wrong side of the street. I do like it however, I did also find the PDF file for the
original art in case I do change my mind (opinions?)....I also obtained the revolving cop light assembly for the top, a hard to find part.
The wood on top is pretty burnt and will have to be changed.

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #42 on: August 20, 2017, 03:21:31 pm »
 This is not a build thread  merely a update for some of you who might remember this machine, and were curious as to its fate....  After a detailed analysis, it seems the whole machine was apparently built  quickly and cheaply  (at the factory) Not really designed to withstand the ravages of time, (more like disposable and cost saving.) add to that the water damage from the fire guys, and dry rot set in, So, Jennifer late in the nights, has built a new cabinet of maple .... So yes it is in good hands and will live again. 8)

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #43 on: August 21, 2017, 01:07:42 am »
   Mods....
Normally I find mods incredibly lame, clammy trash (*Laughs a bit, No not you PL1)...However,

                             
                               
« Last Edit: September 11, 2017, 05:51:38 pm by jennifer »

pbj

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7472
  • Obey.
    • The Chris Burke Band
Re: Jennifers "HOT" new pin....
« Reply #44 on: August 21, 2017, 10:08:01 am »
 :pics

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #45 on: August 21, 2017, 10:50:55 am »
     Not really much to see yet, just a new cab and boxes of parts to be fitted.... But to the curious, Next weekend is its first day outside, so I"ll do some just for you. ;D
Now the bad news, HS2 apparently has some kind of sub culture of hoarders, because the boards are like really hard to find, So in the interest of running OEM, I had to source a MPU from Dracula, and replace the driver boards with aftermarket (so far) only found about half of them.... And the wire, still in shock on that subject.
« Last Edit: August 21, 2017, 11:03:20 am by jennifer »

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Online Online
  • Posts: 6048
  • I break stuff...then fix it...sometimes
Re: Jennifers "HOT" new pin....
« Reply #46 on: August 21, 2017, 07:06:36 pm »
This is not a build thread  merely a update for some of you who might remember this machine, and were curious as to its fate....  After a detailed analysis, it seems the whole machine was apparently built  quickly and cheaply  (at the factory) Not really designed to withstand the ravages of time, (more like disposable and cost saving.) add to that the water damage from the fire guys, and dry rot set in, So, Jennifer late in the nights, has built a new cabinet of maple .... So yes it is in good hands and will live again. 8)

yes. the entire pinball lineup is made to be assembled as quickly as possible. in fact, the IDC connectors, (chosen for their ease of use and speed of installation) are the most common source of failure in the history of connectors.

the cabinets are stamped out as fast as possible, lots aren't even glued... just stapled.

you have part numbers of boards/parts you are looking for? i think I have a getaway that was trashed a number of years ago.

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #47 on: August 22, 2017, 03:25:35 pm »
     I work on multiple machines all at once, and next to this is a pre war Wurlitzer, It is like culture shock to go from old world German craftsmanship to this pile, Sometimes I get so depressed Jenn has to just leave And get a cherry Slurpee, So your unbiased opinion validates my analysis and I AM NOT CRAZY!.... However not to poo on this "holy grail", Doing it better is easier said than done, The top of HS2 is actually quite complex and in hindsight of my cab build should have been milled first and then assembled (that's why next weekend it goes outside to remove the top.)... Yes baby makes mistakes too. ::) 

pbj

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7472
  • Obey.
    • The Chris Burke Band
Re: Jennifers "HOT" new pin....
« Reply #48 on: August 22, 2017, 03:26:34 pm »
No pics, no Highspeed.


jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #49 on: August 22, 2017, 03:29:50 pm »
   After you put your posts back in this thread.... >:D
« Last Edit: August 23, 2017, 02:43:44 am by jennifer »

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #50 on: August 27, 2017, 07:37:32 pm »
edit
« Last Edit: September 11, 2017, 05:49:37 pm by jennifer »

pbj

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7472
  • Obey.
    • The Chris Burke Band
Re: Jennifers "HOT" new pin....
« Reply #51 on: August 28, 2017, 12:27:56 am »
Wow, that looks amazing.

gamepimp

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 289
Re: Jennifers "HOT" new pin....
« Reply #52 on: August 28, 2017, 07:32:20 am »
Nice work!

Nephasth

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 793
  • Bitches love Centipede
Re: Jennifers "HOT" new pin....
« Reply #53 on: August 28, 2017, 09:52:12 am »
When you ask Jen to send nudes, she delivers! :applaud:
%Bartop

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 17719
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Jennifers &quot;HOT&quot; new pin....
« Reply #54 on: August 28, 2017, 10:21:35 am »
My new favorite build thread. 99% better than half the stuff we see get CNCed.
***Build what you dig, bro. Build what you dig.***

Nephasth

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 793
  • Bitches love Centipede
Re: Jennifers &quot;HOT&quot; new pin....
« Reply #55 on: August 28, 2017, 10:37:26 am »
My new favorite build thread. 99% better than half the stuff we see get CNCed.

%Bartop

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Online Online
  • Posts: 6048
  • I break stuff...then fix it...sometimes
Re: Jennifers "HOT" new pin....
« Reply #56 on: August 28, 2017, 02:38:56 pm »
schmexy

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #57 on: August 28, 2017, 03:13:01 pm »
Oh you guys are so sweet to honey, Thx.
« Last Edit: September 10, 2017, 11:49:26 pm by jennifer »

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #58 on: October 31, 2017, 04:34:39 pm »
Jennifer FUN DAY, the top is done (in oak, don't ask) a little putty, and it's first coats of interlock!

Nephasth

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 793
  • Bitches love Centipede
Re: Jennifers "HOT" new pin....
« Reply #59 on: October 31, 2017, 07:27:50 pm »
Did you really make a backbox out of an entertainment center?
%Bartop

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #60 on: November 01, 2017, 12:43:28 am »
Did you really make a backbox out of an entertainment center?
Not really sure where that came from....But no, that's the real deal, Built from scratch with cured and dried maple ply, The top beings it is actually quite complex was made with oak. The pic doesn't do it justice. (Sorry about that).

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Online Online
  • Posts: 6048
  • I break stuff...then fix it...sometimes
Re: Jennifers "HOT" new pin....
« Reply #61 on: November 01, 2017, 12:24:16 pm »
I guess people are so used to seeing other cut up cheap woodgrain particleboard here, that seeing real veneered wood causes them pain.  ;D

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2525
  • SHMUP'EM
Re: Jennifers "HOT" new pin....
« Reply #62 on: November 01, 2017, 01:06:35 pm »
Damn it did I miss yet ANOTHER picture of jennifer?

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #63 on: February 21, 2018, 12:21:58 am »
  Some primer....

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #64 on: February 21, 2018, 12:23:29 am »
  Carefully sanded with love....

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #65 on: February 21, 2018, 12:24:53 am »
And finally the first of 3 color coats....

Drnick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1243
  • Plodding Through Life
Re: Jennifers "HOT" new pin....
« Reply #66 on: February 21, 2018, 03:54:39 pm »
If you look real closely you can just about see the reflection of the Photographer in the paintwork,  Jennifer?  :applaud: :applaud: :applaud:

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #67 on: February 21, 2018, 09:52:41 pm »
Oh yes that's me, little dizzy from paint fumes, and taking bad pics late in the night, (sorry about that) Jenn should have done some kind of "celibration" pose for the ocasion, cause that thing came out really nice. ;)

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #68 on: February 22, 2018, 11:53:48 pm »
Sanded again....

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #69 on: February 22, 2018, 11:58:10 pm »
And painted again, one more to go....
« Last Edit: February 23, 2018, 12:02:28 am by jennifer »

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #70 on: April 14, 2018, 12:47:31 am »
And now that there is mil thickness and cured, the back and sides are color sanded....

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #71 on: April 14, 2018, 11:03:42 pm »
Some sideart.....

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 17719
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Jennifers &quot;HOT&quot; new pin....
« Reply #72 on: April 14, 2018, 11:10:20 pm »
Nice job!
***Build what you dig, bro. Build what you dig.***

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #73 on: April 14, 2018, 11:27:03 pm »
Thx, I was beginning to think nobody was watching this.... The work it was fun, but not done yet, The cab and playfield need to be addressed next before this gets too far.

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Online Online
  • Posts: 6048
  • I break stuff...then fix it...sometimes
Re: Jennifers "HOT" new pin....
« Reply #74 on: April 14, 2018, 11:49:17 pm »
oh.... we watch.... don't you worry.


and judge.... ALWAYS JUDGING


pbj

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7472
  • Obey.
    • The Chris Burke Band
Re: Jennifers "HOT" new pin....
« Reply #75 on: April 15, 2018, 12:10:47 am »
Did that sideart come pre-faded?


jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #76 on: April 15, 2018, 12:19:32 am »
oh.... we watch.... don't you worry.


and judge.... ALWAYS JUDGING
**Jenn gets worried....No that's not faded Pbj its just under bright work lights, and not an awesome pic. I will try another one please.

pbj

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7472
  • Obey.
    • The Chris Burke Band
Re: Jennifers "HOT" new pin....
« Reply #77 on: April 15, 2018, 12:32:35 am »
Iím not trying to be snarky, youíve done very good work on this.  It looks faded, though.  Some suppliers had issues with this...


jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #78 on: April 15, 2018, 12:52:39 am »
I didn't think snark, and Jenn needs all the help she can get with this thing, (Now I will be worried about color too, THX ::)) ....If you look closely the edges are cut back onto the cab about 3/16" so it can be painted again (to hide the cut edge, and bring it up to sticker level before clear).... I don't have a color match to compare this thing to as a real machine, so not real sure what to do at this point if the color is wrong.

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #79 on: April 15, 2018, 02:13:25 am »
Well PBJ, you certainly have a discerning eye for pins,  I made a few calls and got a pantone color code and you are right, the color is not quite as red as it should be although its close, and apparently the original machines  (and aftermarket decals ) did suffer from bad cases of fade, most likely the red pigments were the culprit.... Since this was a smoldering basket case money suck I think Ill just live with it, The vinyl seems quality screen and the clear will help protect it from UV going into the future.   

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12846
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Jennifers "HOT" new pin....
« Reply #80 on: April 15, 2018, 09:50:01 am »
its just a little off, nothing I couldnt live with.

Hows the PF?
2014 Standup UCA Runner Up
2015 Restoration UCA Winner
2016 thomas_surles choice award
2017 International Evil Buddhist Award

Latest project - Dayclona USA 2 :
http://forum.arcadecontrols.com/index.php/topic,155515.0.html

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #81 on: April 15, 2018, 12:16:21 pm »
That was a surprise twist to this story,  Its NASTY, horrible in fact, such a shame for such a low mileage machine. Currently, Jenn Is building a rotisserie out of 2 engine stands (Ill show that project) but the good news is I got lucky on parts and found a repro P/F. so this will be a swap.... of sorts.

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #82 on: April 15, 2018, 12:30:30 pm »
   Heres the spinner project, If you got some vision.... Its actually 2 foldable engine stands, getting trimmed out in stainless. I don't know if this has ever been done before, but it will certainly be industrial heavy duty when its done. So far its been all bolt together (no welding).
« Last Edit: April 17, 2018, 12:14:39 am by jennifer »

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #83 on: April 17, 2018, 12:17:24 am »
The playfield...

pbj

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7472
  • Obey.
    • The Chris Burke Band
Re: Jennifers "HOT" new pin....
« Reply #84 on: April 17, 2018, 10:20:43 am »
That's pretty much how that game looked on location.   :lol

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #85 on: April 17, 2018, 11:29:03 am »
I know right, makes you wonder why some of those coin guys didn't at least clean there stuff sometimes...Ive never played hs2 Maybe it sucks whos to say, saw one working on the utubes (it looks fun), Jenn is curious about the condition of this under all that soot, It was protected from smoldering ash by the glass.... The the temper in the glass, also makes me nervous, When those things pop it is ugly, But for now don't have a spare one.

pbj

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7472
  • Obey.
    • The Chris Burke Band
Re: Jennifers "HOT" new pin....
« Reply #86 on: April 17, 2018, 12:07:18 pm »
And you haven't dragged some Novus down it already because....?


Nephasth

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 793
  • Bitches love Centipede
Re: Jennifers "HOT" new pin....
« Reply #87 on: April 17, 2018, 12:39:39 pm »
And you haven't dragged some Novus down it already because....?

...it should be vacuumed off first?
%Bartop

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #88 on: April 17, 2018, 12:42:55 pm »
You make that sound easy ::).... It needs to be stripped and washed with naptha first, (not to mention it has a new P/F) But time is issue, this project so far almost beat me down, it was quite complex and pushed my limits.
« Last Edit: April 17, 2018, 12:49:50 pm by jennifer »

pbj

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7472
  • Obey.
    • The Chris Burke Band
Re: Jennifers "HOT" new pin....
« Reply #89 on: April 17, 2018, 01:03:18 pm »
You bought a new PF without checking the condition of the old one?


Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12846
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Jennifers "HOT" new pin....
« Reply #90 on: April 17, 2018, 01:18:00 pm »
But time is issue

Time aint so hard, Lock yourself in the dungeon and don't come out till your done
2014 Standup UCA Runner Up
2015 Restoration UCA Winner
2016 thomas_surles choice award
2017 International Evil Buddhist Award

Latest project - Dayclona USA 2 :
http://forum.arcadecontrols.com/index.php/topic,155515.0.html

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #91 on: April 17, 2018, 02:07:55 pm »
You bought a new PF without checking the condition of the old one?
I did, it was just so pretty, The original one apparently had diamond plate on it as opposed to clearcoat, A girl just cant ever have enough P/fs around right? 8).... As for you Malenco, I see where your going with that, But don't forget Jenn builds a dozen machines at a time, not crying over just one.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12846
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Jennifers "HOT" new pin....
« Reply #92 on: April 17, 2018, 02:52:28 pm »
Jemmifer, shouldn't you be in a dungeon finishing this pin?
2014 Standup UCA Runner Up
2015 Restoration UCA Winner
2016 thomas_surles choice award
2017 International Evil Buddhist Award

Latest project - Dayclona USA 2 :
http://forum.arcadecontrols.com/index.php/topic,155515.0.html

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #93 on: April 17, 2018, 03:04:57 pm »
***Jennifer laughs and summons her monkeys....I am actually.

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #94 on: April 19, 2018, 12:04:07 am »
night work....

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #95 on: April 19, 2018, 01:04:45 am »
4oz of black....

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #96 on: April 19, 2018, 02:18:06 am »
Some clear...

pbj

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7472
  • Obey.
    • The Chris Burke Band
Re: Jennifers "HOT" new pin....
« Reply #97 on: April 19, 2018, 10:00:51 am »
WIPE OFF THE PLAYFIELD


jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #98 on: April 19, 2018, 01:02:20 pm »
I am getting to that (heres a peek at the new one).... However Jennifer has been talking about paint for years and nobody seems to understand the concept of what I say so for now its all about getting this thing to assembly.   

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #99 on: May 17, 2018, 10:18:03 am »
**Mid project observations.... The backbox corner bracket carriage bolts are a odd 1/2 size, with smooth heads non-the less, Don't know what Williams was thinking there, perhaps made there own hardware?, Anyway replacements are at best with minimal markings an the head. Since this isn't really a restoration that could be considered fine, But Jenn has opted for cut/chrome and etch and paint the heads (If anyone wants to watch that process I will post on that) if not that is the plan.... CIRCUT BOARD PANEL: this got deep, I was going to replace it with aluminum however the standoff holes are 3/8" square, too small for a chassis punch, and (I don't have a turret press anymore) Also the aluminum has a dissimilar metal potential (sped up by the voltage is to carry) so connections could be compromised, solution, The old one (a little bit heat warped) is going to be replated in zink/and clear chromate like most likely it was originally. And finally the wire harness, this after some reverse engineering apparently was constructed in sub assemblies and put together to be one harness spiderwebing throughout the whole machine. This explains how Jenn hasn't been able to find any backbox wire, The solution is an ugly prospect, and is going to require a few new tools for Jennifers workbench. 

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12846
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Jennifers "HOT" new pin....
« Reply #100 on: May 17, 2018, 10:51:55 am »
hurry up and finish this so I can buy it off of you
2014 Standup UCA Runner Up
2015 Restoration UCA Winner
2016 thomas_surles choice award
2017 International Evil Buddhist Award

Latest project - Dayclona USA 2 :
http://forum.arcadecontrols.com/index.php/topic,155515.0.html

Nephasth

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 793
  • Bitches love Centipede
Re: Jennifers "HOT" new pin....
« Reply #101 on: May 17, 2018, 12:39:20 pm »
hurry up and finish this so I can buy it off of you
And demand free shipping? :P
%Bartop

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #102 on: May 18, 2018, 05:23:34 pm »
Free shipping?? ???
« Last Edit: May 19, 2018, 05:18:28 am by jennifer »

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12846
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Jennifers "HOT" new pin....
« Reply #103 on: May 25, 2018, 01:57:15 pm »
How many HDMI ports does it have, and will it fit in my basement?
2014 Standup UCA Runner Up
2015 Restoration UCA Winner
2016 thomas_surles choice award
2017 International Evil Buddhist Award

Latest project - Dayclona USA 2 :
http://forum.arcadecontrols.com/index.php/topic,155515.0.html

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #104 on: May 25, 2018, 03:36:57 pm »
Have to revise my plans.... The new light board may have to be modified a tad to better accommodate a color Lcd  dmd which is physically larger than the original plasma or Led screen,Apparently it does just fit right in, but it seems to come awfully close to the speakers (especially the 2 /5"coax upgrade) and physically overhangs the top of the Dmd panel barely clearing the light board.... which apparently has a sagging problem by design when the bushings wear out (and will be a bit heavier with mirror grade stainless on the back of it) You can see what I mean at the 4 min mark here, https://www.youtube.com/watch?v=dmDXzITV-WY  also the chrome guy is having some troubles with the new hardware .So for now the back box is done and waiting for parts to fit,.... new plans will be moving on to the cab.
« Last Edit: May 31, 2018, 01:00:46 am by jennifer »

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #105 on: June 09, 2018, 04:11:44 pm »
Anyway, Got some time so lets move this project forward.... Before this the cab goes to paint it needs some work, Mods in particular, (*Not easily reversible). So any purists, may want to look the other way, And as a disclaimer to my friends who expect faithful restores, Well Jenn is ashamed and embarrassed but this machine was less that desirable as built and IMO needs some upgrades So lets at least do them as right as possible And incorporate as not easily reversible given this is my first attempt at such needless butchering..... Here we have the Stainless steel anti theft cable blocks for the undercab lighting, If anyone wants to see the fab process speak up as this is all "real" time,(*Except Mike A, since this is going to be welded, and don't want to offend him >:D) ...or that's just the plan for now,
« Last Edit: June 09, 2018, 04:21:00 pm by jennifer »

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #106 on: June 10, 2018, 11:21:10 am »
While Jenn does that, this may a good time to talk about equipment. There is nothing magical here, in fact most of this was done outside in the driveway on a 100 dollar tablesaw, a router (using sawboards and jigs)and a little compressor from W/mart. Working with stainless steel gets a little more advanced however given the difficulty of working with it but it is going well.... The point being, building stuff is fun and you do not need high end stuff to do it nice, you simply just need to know the limitations of what your tools can do so you can do it safely.
« Last Edit: June 10, 2018, 11:24:42 am by jennifer »

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #107 on: June 11, 2018, 02:45:15 pm »
Jenn feels you guys missed out on a really fun adventure in fab, it was quite a harsh experience, But almost done, Cut, cleaned, sanded, fit drilled, TIG welded, and polished stainless..... We will move on to the Dmd panel, and the sub speaker mount pad next (more Mods ::)).
« Last Edit: June 11, 2018, 04:37:36 pm by jennifer »

Mike A

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1770
  • Buy a Multimeter
Re: Jennifers "HOT" new pin....
« Reply #108 on: June 11, 2018, 03:13:44 pm »
Quit smoking.

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #109 on: June 11, 2018, 03:17:26 pm »
Quit smoking.
So sorry, But Im not interested....Go buy a welder.

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #110 on: June 11, 2018, 10:15:13 pm »
Hmmm, we have a curious problem now, so POP QUIZ!!!.... The speaker hole was drilled at 5.50" before it was assembled, as per original, However the new speaker is 8" (7" across the cone) but HOW to modify the hole could be tricky....Any thoughts?

Mike A

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1770
  • Buy a Multimeter
Re: Jennifers "HOT" new pin....
« Reply #111 on: June 11, 2018, 10:23:38 pm »
Fasten a piece of wood behind the hole. It will give you something to bite into in the center of the hole.
« Last Edit: June 11, 2018, 10:26:54 pm by Mike A »

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #112 on: June 11, 2018, 10:35:22 pm »
Yes that would work, But 3 things come to mind. That extends the pilot bit 1/2" before it even touches, and could be a "wobbly" start, and #2, the means of fastening it would have to be carefully done as to not create damage to the outside the hole area and #3 finding center could be considered overly complex.... Close, really close Mike, In fact Jenn will give you that one. but there is another answer, A plug close cut IN the hole , wedged in with toothpicks and set with epoxy. and then cut from both sides to minimize splintering ;)
« Last Edit: June 11, 2018, 11:07:08 pm by jennifer »

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #113 on: June 12, 2018, 01:50:11 am »
So with that in mind, I have to cheat this a little in terms of using budget backyard machines on this.... Jenn wants that pilot hole as strait as possible (in hardwood) and had to use a machine so it didn't break my wrist again.
« Last Edit: June 12, 2018, 01:52:30 am by jennifer »

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12846
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Jennifers "HOT" new pin....
« Reply #114 on: June 12, 2018, 08:24:40 am »
cut the right size hole in a scrap piece, clamp it (or screw it in and putty the holes after), then user a router with a flush trim bit.

Finding the center of a circle is super easy, you can square the corners and draw diagonal lines, or use the compass method.
https://www.wikihow.com/Find-the-Center-of-a-Circle
2014 Standup UCA Runner Up
2015 Restoration UCA Winner
2016 thomas_surles choice award
2017 International Evil Buddhist Award

Latest project - Dayclona USA 2 :
http://forum.arcadecontrols.com/index.php/topic,155515.0.html

Nephasth

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 793
  • Bitches love Centipede
Re: Jennifers "HOT" new pin....
« Reply #115 on: June 12, 2018, 09:04:28 am »
cut the right size hole in a scrap piece, clamp it (or screw it in and putty the holes after), then user a router with a flush trim bit.

Bingo. 8)
%Bartop

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #116 on: June 12, 2018, 11:46:07 am »
cut the right size hole in a scrap piece, clamp it (or screw it in and putty the holes after), then user a router with a flush trim bit.

Finding the center of a circle is super easy, you can square the corners and draw diagonal lines, or use the compass method.
https://www.wikihow.com/Find-the-Center-of-a-Circle
   That I guess after the fact would have been a faster,cheaper less elaborate solution, Screwing a template to the workbench and centering the cab over it I mean, cutting a 7" over a hole gets into some interesting physics where finding center could be considered difficult and in hindsight dry times for the glue slowed me down ...Jenn cut the plug 1/8 too small (on purpose) and epoxied little bits of paint stick around it, buzzed it on the belt to make a good fit and used wood glue to glue it into the cab (long dry times)... I will post a pic before I cut it for the curious.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12846
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Jennifers "HOT" new pin....
« Reply #117 on: June 12, 2018, 11:47:52 am »
Next time don't post at 10pm without waiting for an answer :p
2014 Standup UCA Runner Up
2015 Restoration UCA Winner
2016 thomas_surles choice award
2017 International Evil Buddhist Award

Latest project - Dayclona USA 2 :
http://forum.arcadecontrols.com/index.php/topic,155515.0.html

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #118 on: June 12, 2018, 12:39:55 pm »
*Jenn laughs... My windows are all boarded up and I don't have a clock, so I have no idea what time it is, Its kinda like living in a casino, Perhaps you guys should just stay up later 8) *Giggle....Here is that pic, My thoughts were I wanted to minimize glue slobber since this isn't going to be painted (just cleared) and still get a nice fit.

Nephasth

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 793
  • Bitches love Centipede
Re: Jennifers "HOT" new pin....
« Reply #119 on: June 12, 2018, 01:48:04 pm »
*Jenn laughs... My windows are all boarded up...

Open 'em up once in a while... to air out the glue vapors...
%Bartop

Mike A

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1770
  • Buy a Multimeter
Re: Jennifers "HOT" new pin....
« Reply #120 on: June 12, 2018, 02:06:56 pm »
Quote
My windows are all boarded up and I don't have a clock, so I have no idea what time it is, Its kinda like living in a casino

Sounds like a crack house.

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #121 on: June 12, 2018, 02:49:07 pm »
I wouldn't know about that, Jenn would think possibly, Supose they have to hid from task force drones nowdays.... I do it for security and blocking UV rays from old art, otherwise once a day everything gets bleached by the sun, over multiple years that's really hard on pigments....And it helps keep late night noise to a minimum. However Jenn does have a ventilator which curious fact can backdraft the furnace, So carbin monoxide is a constant battle.
« Last Edit: June 12, 2018, 03:01:13 pm by jennifer »

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #122 on: June 12, 2018, 04:47:42 pm »
If any of you guys were curious about that fancy dandy hole cutter heres a link (A/zon has them too).... It seems a little spendy but its adjustable so you save money on hole cutters on the backside, Its kind of tricky to figger out, and uses oddly sized set screws which always have you looking for a different Allen wrench, and buy extra blades because it gets used.... HIGHLY recommended.https://www.holecutterstore.com/hole-pro-x-230-1-7-8-to-9-1-4-twin-blade-adjustable-hole-cutter-kit.html

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1810
Re: Jennifers "HOT" new pin....
« Reply #123 on: June 12, 2018, 07:48:31 pm »
Even from across the room I can see there is no going back now.... This thing is going to be downright nasty. :-\

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31