Main > Main Forum
New product quick review: Retrolink Atari USB adapter
alfonzotan:
I stumbled across this on Amazon last week. It's a two-port Atari 2600 (and related) controller to USB adapter:
http://www.amazon.com/Atari-PC-USB-Cable-RETROLINK-2600/dp/B007ZS35CU/ref=sr_1_11?s=videogames&ie=UTF8&qid=1341873193&sr=1-11
Not sure how long this product has been around. There are several vendors on eBay and Amazon offering it. I couldn't find a website for the manufacturer (Retrolink). But it was cheap ($8 + shipping, or just under $13 shipped from the Amazon vendor), so I took a gamble.
Initial results were not encouraging. The Asrock board in my cabinet didn't recognize the adapter, either in XP (showed up as a USB device requiring a driver) or in OS X. No drivers or documentation were included (not even the box seen in the photo), and no website could be found. I was about to toss it, then figured I might as well try it on a different computer. Plugged it into my main machine (Gigabyte i7 board), and it popped right up. Worked in Stella with no configuration at all. So I scrounged up an old USB PCI card, installed that in the cab, and bang: Atari goodness.
The Retrolink adapter (assuming your motherboard recognizes it) works out of the box with Stella, no configuration required. My 30-year-old Atari joystick plays perfectly. Ditto for the (also) 30-year-old Colecovision controller, although that emulator does have to be configured in Preferences (Mugrat) before playing. I still need to dig out a set of Atari paddles and see how it works with those.
So: Assuming it works with your mobo, we have a new champ as far as cheap hookups for Atari 9-pin controllers. At $13 shipped, it's just over a third of the cost of a Stelladaptor, and about $10 (shipped) cheaper a single Legacy Engineer USB knockoff stick. :applaud:
matsadona:
Hm, neat little device. Does it support the paddles also, or just (digital) joysticks?
PL1:
--- Quote from: alfonzotan on July 09, 2012, 06:45:56 pm ---I still need to dig out a set of Atari paddles and see how it works with those.
--- End quote ---
Don't forget to check the driving controller, too.
--- Quote from: alfonzotan on July 09, 2012, 06:45:56 pm ---we have a new champ as far as cheap hookups for Atari 9-pin controllers. At $13 shipped, it's just over a third of the cost of a Stelladaptor
--- End quote ---
The retrolink has 2 ports, instead of the Stelladaptor's one.
For a two player joystick setup it's around 1/6th the price.
Scott
alfonzotan:
Update: it does not appear to work with Stella + paddles (certainly does not work "out of the box").
I don't have a driving controller to test with.
DaveMMR:
Do they work with Sega Master System/Genesis controllers (including 6 button)?