| Main > Main Forum |
| New product quick review: Retrolink Atari USB adapter |
| (1/2) > >> |
| alfonzotan:
I stumbled across this on Amazon last week. It's a two-port Atari 2600 (and related) controller to USB adapter: http://www.amazon.com/Atari-PC-USB-Cable-RETROLINK-2600/dp/B007ZS35CU/ref=sr_1_11?s=videogames&ie=UTF8&qid=1341873193&sr=1-11 Not sure how long this product has been around. There are several vendors on eBay and Amazon offering it. I couldn't find a website for the manufacturer (Retrolink). But it was cheap ($8 + shipping, or just under $13 shipped from the Amazon vendor), so I took a gamble. Initial results were not encouraging. The Asrock board in my cabinet didn't recognize the adapter, either in XP (showed up as a USB device requiring a driver) or in OS X. No drivers or documentation were included (not even the box seen in the photo), and no website could be found. I was about to toss it, then figured I might as well try it on a different computer. Plugged it into my main machine (Gigabyte i7 board), and it popped right up. Worked in Stella with no configuration at all. So I scrounged up an old USB PCI card, installed that in the cab, and bang: Atari goodness. The Retrolink adapter (assuming your motherboard recognizes it) works out of the box with Stella, no configuration required. My 30-year-old Atari joystick plays perfectly. Ditto for the (also) 30-year-old Colecovision controller, although that emulator does have to be configured in Preferences (Mugrat) before playing. I still need to dig out a set of Atari paddles and see how it works with those. So: Assuming it works with your mobo, we have a new champ as far as cheap hookups for Atari 9-pin controllers. At $13 shipped, it's just over a third of the cost of a Stelladaptor, and about $10 (shipped) cheaper a single Legacy Engineer USB knockoff stick. :applaud: |
| matsadona:
Hm, neat little device. Does it support the paddles also, or just (digital) joysticks? |
| PL1:
--- Quote from: alfonzotan on July 09, 2012, 06:45:56 pm ---I still need to dig out a set of Atari paddles and see how it works with those. --- End quote --- Don't forget to check the driving controller, too. --- Quote from: alfonzotan on July 09, 2012, 06:45:56 pm ---we have a new champ as far as cheap hookups for Atari 9-pin controllers. At $13 shipped, it's just over a third of the cost of a Stelladaptor --- End quote --- The retrolink has 2 ports, instead of the Stelladaptor's one. For a two player joystick setup it's around 1/6th the price. Scott |
| alfonzotan:
Update: it does not appear to work with Stella + paddles (certainly does not work "out of the box"). I don't have a driving controller to test with. |
| DaveMMR:
Do they work with Sega Master System/Genesis controllers (including 6 button)? |
| Navigation |
| Message Index |
| Next page |