Main > Main Forum
soldering tips needed
<< < (2/3) > >>
Nephasth:
Also, if it's easier for you, the resistors don't need to be soldered directly to the LEDs. They can be several feet away from the LEDs in the circuit in a more convenient location.
tony.silveira:

--- Quote from: Nephasth on July 03, 2012, 01:18:49 pm ---Also, if it's easier for you, the resistors don't need to be soldered directly to the LEDs. They can be several feet away from the LEDs in the circuit in a more convenient location.

--- End quote ---

didn't think of that either, sheesh!  i can just run wire to my ledwiz and have the resistors installed in the screw terminals and then solder the wire to that.

thanks for the input guys!
knave:
Nobody's gonna tell him that he can buy new tips at Radio Shack?   :lol
Mysterioii:
No prob.  BTW even if I'm just soldering wire to an LED or other component, I like to tin the wire first then hook it with the needle nose pliers just like if I was soldering two components together.  Mechanical connection... that's how I was taught, and it stuck...   :lol
alfonzotan:
There's always Old Faithful when it comes to soldering tips:  "The bigger the blob, the better the job!"
Navigation
Message Index
Next page
Previous page

Go to full version