| Main > Main Forum |
| Custom Monitor Bezel |
| (1/1) |
| mytymaus007:
Im looking for a custom size monitor bezel for 20 inch LCD 4:3 size not wide screen |
| iscariot:
I think there's a thread here on how to make your own bezel. That one works and looks great. |
| capsule:
This one? http://forum.arcadecontrols.com/index.php/topic,17175.0.html |
| tsaylor:
I used the same monitor type. But since monitors are flat these days I ended up just making a flat bezel from black poster board. I cut the opening using an x-acto knife and a straight edge. But I also needed some wood trim on the sides just to hold it down flat (as the poster board wasn't so thick so it wanted to buckle a little). I had looked at those threads on making your own, which looked great, but which also had a curve to match CRT's. For an LCD you won't want it to curve where it meets the monitor. |
| mytymaus007:
--- Quote from: tsaylor on June 30, 2012, 12:07:19 pm ---I used the same monitor type. But since monitors are flat these days I ended up just making a flat bezel from black poster board. I cut the opening using an x-acto knife and a straight edge. But I also needed some wood trim on the sides just to hold it down flat (as the poster board wasn't so thick so it wanted to buckle a little). I had looked at those threads on making your own, which looked great, but which also had a curve to match CRT's. For an LCD you won't want it to curve where it meets the monitor. --- End quote --- Any pics? |
| Navigation |
| Message Index |