| Main > Main Forum |
| Powering up second power supply |
| (1/2) > >> |
| TheShaner:
I have a second PC power supply in my cabinet that I have intended on using for all of my lights. I currently have it hooked to my Marquee lights, but when I turn on the cabinet, the second power supply does not come on. Is there some trick to getting it to fire up without it being attached to a computer? |
| Nephasth:
You have to jump the green wire to ground (any adjascent black wire) on the mobo connector. |
| TheShaner:
So, pull out the green wire from The mobo connector on that power supply and run it to any ground in the cab? |
| BobA:
No you run it to a ground on the same connector that you pulled it out from. Second PS Ground. |
| Nephasth:
This is how I do it on a PS I use for testing. The wire is held in place with some hot glue. |
| Navigation |
| Message Index |
| Next page |