Main > Main Forum
DAYTONA USA VR BUTTON SETUP. Model2 convert
(1/3) > >>
mrcram:
Still working on my Daytona Twin cab model2 conversion and I have a question about the VR buttons.  I opened up the cover expecting a simple lighted push buttons but no.  They are all sodered on to a 12 pin board.  Does anyone know what pin is what or do I need to get individual lighted pushbuttons?  




mytymaus007:
Looks like a nightmare i would duplicate the size of the sheet metal plate and just get standard happ size and illuminate them Solves that problem!
BadMouth:

--- Quote from: mytymaus007 on June 19, 2012, 04:44:38 pm ---Looks like a nightmare i would duplicate the size of the sheet metal plate and just get standard happ size and illuminate them Solves that problem!

--- End quote ---

What would you do about there only being about an inch mounting depth?
BadMouth:

--- Quote from: mrcram on June 19, 2012, 03:55:38 pm ---Still working on my Daytona Twin cab model2 conversion and I have a question about the VR buttons.  I opened up the cover expecting a simple lighted push buttons but no.  They are all sodered on to a 12 pin board.  Does anyone know what pin is what or do I need to get individual lighted pushbuttons?  

--- End quote ---

I don't have a pinout, but it shouldn't be hard to figure out with a multi-meter.
The lights can be lit individually, so I'm guessing common ground with a pin to each +.
Then buttons would have a common ground with a pin to each +.
That would equal 12 pins.

Hopefully RamjetR or GBeef will reply.   They are both using the original panel.

(those panels in that good of shape go for a good bit of money btw)

Brian74:
Hey, I have one too! So here is what I have for a pinout. I still have the cable plugged in on mine so from left to right. The way you have it in the pic. there are 2 different grounds. One for the lights and one for the buttons. The grounds are on the outside. So it goes like this.

1st 6 wires lights
pin
#1 Yellow=ground
#2 red black strip=Start
#3 blue black strip=Blue
#4 pink black strip=Red
#5 brown black strip=Yellow
#6 green black strip=green

2nd 6 wires buttons
#7 red white strip=start
#8 pink white strip=red
#9 blue white strip=blue
#10 brown white strip=yellow
#11 green white strip=green
#12 white=ground
   
Navigation
Message Index
Next page

Go to full version