Main > Main Forum
What do you use for a cash box?
Malenko:
the dynamo I bought had a laundry detergent bottle cut in half. I replaced it with a normal coin door tub
compute:
I believe the PONG prototype originally used a loaf pan, so you may be onto something.
Boomstick, I love your coin box assembly. No mechs to worry about :D
RyoriNoTetsujin:
--- Quote from: compute on July 01, 2012, 07:14:50 am ---I believe the PONG prototype originally used a loaf pan, so you may be onto something.
--- End quote ---
That's because... I put it there...
* RyoriNoTetsujin closes the door of the TARDIS and disappears.
Muhuhuhuhahahahahaha... :laugh2:
eds1275:
What I have done is purchased a 8" cake/loaf pan and drilled a hole in it near the top. I swapped out the bottom bolt on my coin door for a longer one that goes through both the coin door and the cake pan, holding it in place. Since it isn't touching the ground it has a nice ring to it even with the first coin dropped. And as it fills up it totally has "that sound"
lilshawn:
--- Quote from: eds1275 on July 02, 2012, 12:39:05 pm ---What I have done is purchased a 8" cake/loaf pan and drilled a hole in it near the top. I swapped out the bottom bolt on my coin door for a longer one that goes through both the coin door and the cake pan, holding it in place. Since it isn't touching the ground it has a nice ring to it even with the first coin dropped. And as it fills up it totally has "that sound"
--- End quote ---
dafuq?! you take this pic through a hole drilled in the control panel?!? awesome!