| Main > Main Forum |
| What do you use for a cash box? |
| << < (3/4) > >> |
| Malenko:
the dynamo I bought had a laundry detergent bottle cut in half. I replaced it with a normal coin door tub |
| compute:
I believe the PONG prototype originally used a loaf pan, so you may be onto something. Boomstick, I love your coin box assembly. No mechs to worry about :D |
| RyoriNoTetsujin:
--- Quote from: compute on July 01, 2012, 07:14:50 am ---I believe the PONG prototype originally used a loaf pan, so you may be onto something. --- End quote --- That's because... I put it there... * RyoriNoTetsujin closes the door of the TARDIS and disappears. Muhuhuhuhahahahahaha... :laugh2: |
| eds1275:
What I have done is purchased a 8" cake/loaf pan and drilled a hole in it near the top. I swapped out the bottom bolt on my coin door for a longer one that goes through both the coin door and the cake pan, holding it in place. Since it isn't touching the ground it has a nice ring to it even with the first coin dropped. And as it fills up it totally has "that sound" |
| lilshawn:
--- Quote from: eds1275 on July 02, 2012, 12:39:05 pm ---What I have done is purchased a 8" cake/loaf pan and drilled a hole in it near the top. I swapped out the bottom bolt on my coin door for a longer one that goes through both the coin door and the cake pan, holding it in place. Since it isn't touching the ground it has a nice ring to it even with the first coin dropped. And as it fills up it totally has "that sound" --- End quote --- dafuq?! you take this pic through a hole drilled in the control panel?!? awesome! |
| Navigation |
| Message Index |
| Next page |
| Previous page |