| Main > Main Forum |
| Help with new games area 51 site 4 and original ms pacman |
| << < (2/2) |
| CheffoJeffo:
Definitely grab copies of the manuals for your games. All of the resources that I am aware of (now including Antelope Arcade -- tks PL1 :cheers:) are listed in the wiki: http://wiki.arcadecontrols.com/wiki/Restoration#Game_Manuals.2C_Schematics - I believe boardjunkie is correct about the attract sounds on MsPac. - Yes, the marquee on MsPac is supposed to light up -- remove the marquee retainer and have a look. IIRC, MsPac was a basic florescent fixture and is usually easy to fix with either a new bulb or a new starter. - I think that most of the settings for A51 can be access from the test menu (accessed using the test swtich, usually located just behind the coin door). - Please post of pic of the "white lines" in A51 -- sounds like the brightness is too high. |
| mgb:
Can't totally say without seeing but it sounds like the screen voltage on the A51 monitor may be a bit high. On the back of the monitor, located on the flyback, there should be two small trim-pot knobs. One is for focus and one should be marked screen. Turning the screen knob just a hair counter clockwise may take care of the problem (and darken the picture a little). Its always best to do some research on the monitors first and be careful what you touch in there. The Ms Pacman probably needs a bulb and starter. You can always replace the whole unit with a light unit from Home Depot for $10 or so |
| boardjunkie:
The HV (second anode) is not adjustable. Yer talking about the screen voltage, which there is a control for on the flyback along with focus. They are marked as such.... |
| mgb:
yeah thats what I meant. I was wrong to say high voltage. |
| Navigation |
| Message Index |
| Previous page |