Main > Driving & Racing Cabinets
what servo amp for happ hack?
Brian74:
So I have some good news and bad news to report. The good news is that I got the feed back to work full time now. The problem was that the soldering on one of the pin for the power plug was cracked. So I took the soldering gun heated up the solder and it was fixed. The feed back feels good, but I have encountered the wobble that other ppl have talked about. So now the bad :angry: I was moving the cable that the buttons plugs into after I had the wheel mounted into the cab. When I was moving it, the ground wire touched the hot wire on the amc and not only fried my wheel. But also my wireless kb and my 1tb hdd that had hyperspin and all my roms on :banghead: Im lucky I have that hdd backed up on my 2 tb. So as I sat there being :badmood: trying to refrain from pulling a homer and smurfing the hell out of my cab. I managed to find another wheel. So as I wait, I will finish cleaning my cab, paint and decide what I will do for side are and marquee. How would you guys suggest I repair the plastic sides that cover the wood and the seat. There are some cracks and holes that need repair. Also any color suggestions would be great. Thats to everyone that has help me get this far. Without your assistance, I would still be :dizzy:
brad808:
--- Quote from: Brian74 on June 24, 2012, 01:51:06 pm ---So I have some good news and bad news to report. The good news is that I got the feed back to work full time now. The problem was that the soldering on one of the pin for the power plug was cracked. So I took the soldering gun heated up the solder and it was fixed. The feed back feels good, but I have encountered the wobble that other ppl have talked about. So now the bad :angry: I was moving the cable that the buttons plugs into after I had the wheel mounted into the cab. When I was moving it, the ground wire touched the hot wire on the amc and not only fried my wheel. But also my wireless kb and my 1tb hdd that had hyperspin and all my roms on :banghead: Im lucky I have that hdd backed up on my 2 tb. So as I sat there being :badmood: trying to refrain from pulling a homer and smurfing the hell out of my cab. I managed to find another wheel. So as I wait, I will finish cleaning my cab, paint and decide what I will do for side are and marquee. How would you guys suggest I repair the plastic sides that cover the wood and the seat. There are some cracks and holes that need repair. Also any color suggestions would be great. Thats to everyone that has help me get this far. Without your assistance, I would still be :dizzy:
--- End quote ---
Sorry to hear it. I fried one of my donor wheels by accident as well. As soon as it happens you try and scramble to undo it but unfortunately electricity doesnt move that slowly :'(. Once you get your force feedback set back up again try adjusting the settings for centering force feedback. That was where I was able to remove the "wobble".
BadMouth:
Man, that sucks. :(
I jacked up the ps2 input on my key-wiz swapping the new cp in and out.
That doesn't seem so bad now.
ABACABB:
@Brad808 where do you adjust the settings for centering force feedback? Is it on the AMC or do you do it in the Logitech software?
brad808:
--- Quote from: ABACABB on June 24, 2012, 09:58:14 pm ---@Brad808 where do you adjust the settings for centering force feedback? Is it on the AMC or do you do it in the Logitech software?
--- End quote ---
It's in the software. There are percentage sliders for a few different force feedback parameters that you can turn up or down.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version