Software Support > GroovyMAME

Would the ArcadeForge Soft15khz Dongle Work For GroovyMAME??

(1/1)

lettuce:
Any ideas if the Soft15khz Dongle would work for GroovyMAME so we would be able to use later series of ATI cards than the current 4 series? Heres the Dongle here...

http://wp1114205.wp150.webpack.hosteurope.de/xtcmodified/index.php?cPath=10

I know its designed for soft15khz but what about GroovyMAME?

Ansa89:
Groovymame is only an emulator, it doesn't force the vga signal to 15KHz.
Soft15khz is the opposite: it only forces the  vga signal to 15KHz and it has nothing to do with an emulator.

That said, I think the answer is (obviously) no.

lettuce:
But the modified ATI drivers that Groovymame use's does though...dont they?

Ansa89:
Maybe you are talking about crt-emudriver by Calamity?
I'm quite sure groovymame is _ONLY_ an emulator (no video driver, no stuff to force 15KHz).

Calamity:

--- Quote from: lettuce on April 08, 2012, 12:07:08 pm ---Any ideas if the Soft15khz Dongle would work for GroovyMAME so we would be able to use later series of ATI cards than the current 4 series? Heres the Dongle here...

http://wp1114205.wp150.webpack.hosteurope.de/xtcmodified/index.php?cPath=10

I know its designed for soft15khz but what about GroovyMAME?

--- End quote ---

I've got one of these dongles for my own experiments, I haven't tested it yet unfortunately. However, according to SailorSat, modern ATIs don't like a 15 kHz EDID, so it doesn't help with these cards. The problem is that their drivers just refuse to support low resolutions.

Navigation

[0] Message Index