| Main > Main Forum |
| Electrical...where do you get your disconnects? |
| << < (3/9) > >> |
| RandyT:
--- Quote from: Nephasth on April 02, 2012, 03:38:07 pm ---False. You just have to know where to look. Like I said before, around $8 for a die set. I found a set that will work for this style of quick disconnect as well... http://www.pimfg.com/Product-Detail/HT-236-2C-DIE --- End quote --- I thought you only bought Molex original parts ;). Still, that's almost the same price as the whole crimper shown above, so I wouldn't sweat interchangeability on an $8 ratcheting crimper. Good link for future reference though, as they seem to have quite a few options which look like they will fit these types of bodies. |
| Nephasth:
--- Quote from: RandyT on April 02, 2012, 04:02:53 pm ---Good link for future reference though, as they seem to have quite a few options which look like they will fit these types of bodies. --- End quote --- Yup, I spent a while looking for an affordable solution to crimp those Molex Micro-fit terminal pins. Since I already owned a pair of ratcheting crimpers, I figured dies would be the best way to preserve the valuable real estate inside my toolbox. That site was the cheapest I was able to find at the time... |
| Megaweapon:
To stray slightly off-topic: I'm looking for some pins that I can use to plug wires into a CPS1 kick harness (22-01-2087 housing with 08-52-0101 crimp terminals). The headers in the KK series look like they're solely designed for mounting on a PCB, but I'd like to make an extension. What do I need? |
| Franco B:
I use terminals and sleeves from polevolt.com in the UK and I use the Hozan P-706 crimp tool. The P-706 has a range of anvils on it and I use it for Molex, Mini Molex, AMP UP, a range of JSTs, Hirose etc etc. --- Quote from: Megaweapon on April 02, 2012, 11:03:08 pm ---To stray slightly off-topic: I'm looking for some pins that I can use to plug wires into a CPS1 kick harness (22-01-2087 housing with 08-52-0101 crimp terminals). The headers in the KK series look like they're solely designed for mounting on a PCB, but I'd like to make an extension. What do I need? --- End quote --- CPS1 uses a 10 pin JST NH housing which connects to a JST B10P-SHF-1AA header. You can use Molex KK series but the JST header is the 'correct' one to use. This is a CPS1 breakout adapter I made for someone to connect their CPS1 wired cab to a JPAC. You could make something similar just with another 10 pin JST NH housing on the end. I just tin the wires, tin the header pins, solder together and then use heat shrink to insulate. |
| lanman31337:
--- Quote from: BadMouth on April 02, 2012, 03:27:27 pm ---Usually get my terminals off fleabay in bags of 100. --- End quote --- That's where I do mine, and I use http://www.restockit.com/journeyman-crimping-cutting-tool-non-insulated-insulated-terminals-(klej1005).html?source=IDx20111014x00001a&utm_source=IDx20111014x00001a&utm_medium=free&utm_campaign=comparison&utm_term=KLEJ1005&bvar7=google&bvar10=google&ci_src=14110944&ci_sku=KLEJ1005 for crimping them. I hate ratchet crimpers because most don't have enough force for a good crimp. |
| Navigation |
| Message Index |
| Next page |
| Previous page |