Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Groovy Arcade Linux Compatibility  (Read 4911 times)

0 Members and 1 Guest are viewing this topic.

processor

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 42
  • Last login:June 18, 2018, 04:04:27 am
Groovy Arcade Linux Compatibility
« on: March 25, 2012, 02:51:03 pm »
Hi,

First of all, thx for this great work!!
Groovy Arcade Linux is a great distro.

I'm partially converting my egret II in a mame cab.I bought a Jpac, I have a PIV 2,8ghz, 2gigs of ram, HD of 40Go and a radeon x1300 (pcie).

Then just would like to know whith witch Video Card the 15khz mode is compatible?Every?Ati only?Arcade Vga only?

Thx bye advance for your answer.

Bye

Processor
--Processor

Paradroid

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 687
  • Last login:March 10, 2024, 04:41:43 am
    • SCART Hunter
Re: Groovy Arcade Linux Compatibility
« Reply #1 on: March 25, 2012, 03:36:48 pm »
Unfortunately, according to this post by Calamity (and my own personal experience), the ATI X1300 is compatible with low dot-clocks making it unsuitable.

So, not all ATI cards are compatible. Neither are all Arcade VGA cards. Check the guide here for more info.

Do you have any other contenders laying around?
My MAME/SCART/CRT blog: SCART Hunter

processor

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 42
  • Last login:June 18, 2018, 04:04:27 am
Re: Groovy Arcade Linux Compatibility
« Reply #2 on: March 25, 2012, 04:12:43 pm »
Hi,
Thx for your answer, but you are talking about Calamity drivers, running on windows, and I'm a talking about the linux distrib.
Then if the X1300 is not supported.

Which card support 15khz, with the linux distrib?
--Processor

Paradroid

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 687
  • Last login:March 10, 2024, 04:41:43 am
    • SCART Hunter
Re: Groovy Arcade Linux Compatibility
« Reply #3 on: March 25, 2012, 08:22:38 pm »
Oh, yep, of course! My bad. :P
My MAME/SCART/CRT blog: SCART Hunter

processor

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 42
  • Last login:June 18, 2018, 04:04:27 am
Re: Groovy Arcade Linux Compatibility
« Reply #4 on: March 26, 2012, 03:49:40 am »
Quote
In Linux
 anything besides the X8xx series should work

Hi,

Does this mean that every PCIE Ati should work but the X8xx?

Processor
--Processor

Calamity

  • Moderator
  • Trade Count: (0)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7411
  • Last login:March 14, 2024, 05:26:05 am
  • Quote me with care
Re: Groovy Arcade Linux Compatibility
« Reply #5 on: March 26, 2012, 04:57:42 am »
Hi processor,

The GroovyArcade distro is meant for ATI cards only.

Now, what we know from Windows is that from the X series, only the lower ones work fine (X300, X600,...). The others (X1300, etc.) can't do low dotclocks. HD 2xxx and HD 3xxx have the same problem. This doesn't mean that they don't work: you can just setup GroovyMAME to use higher dotclocks and it will duplicate xres in order to do that, but that's kind of problematic with other emulators.

As this seems to be driver related, and not a hardware issue, in Linux, they might work just fine indeed. The problem is that we don't have information about it. It would be highly appreciated that someone with a bunch of different ATI cards tried the GroovyArcade distro and did the right tests to determine which ones are fully compatible or not. I've tested it myself with R 9250 and HD 4350 and it worked great with those.
Important note: posts reporting GM issues without a log will be IGNORED.
Steps to create a log:
 - From command line, run: groovymame.exe -v romname >romname.txt
 - Attach resulting romname.txt file to your post, instead of pasting it.

CRT Emudriver, VMMaker & Arcade OSD downloads, documentation and discussion:  Eiusdemmodi

Ansa89

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 377
  • Last login:December 09, 2016, 10:40:11 am
Re: Groovy Arcade Linux Compatibility
« Reply #6 on: March 26, 2012, 05:09:33 am »
The GroovyArcade distro is meant for ATI cards only.
Mmmhhh...Are you sure?
For what I saw GroovyArcade try to determine the correct video driver for the X server and force it to 15KHz through kms (aka 15KHz kernel patches).
So since the videocard is supported by the open video drivers and these drivers use kms for image rendering, then the videocard is supported.
Obviously the start point always is having good drivers for that videocard.


I've tested it myself with R 9250 and HD 4350 and it worked great with those.
I have tested it with a R9200 and a HD5450; both works well.
Earth could be the hell of another world

Calamity

  • Moderator
  • Trade Count: (0)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7411
  • Last login:March 14, 2024, 05:26:05 am
  • Quote me with care
Re: Groovy Arcade Linux Compatibility
« Reply #7 on: March 26, 2012, 07:54:48 am »
Obviously the start point always is having good drivers for that videocard.

Yes that's true. And the only drivers that have been tested succesfully are the ATI ones, that's what I meant. Again, if someone had the time and energies to test this with nvidia cards and report back it would be highly appreciated.
Important note: posts reporting GM issues without a log will be IGNORED.
Steps to create a log:
 - From command line, run: groovymame.exe -v romname >romname.txt
 - Attach resulting romname.txt file to your post, instead of pasting it.

CRT Emudriver, VMMaker & Arcade OSD downloads, documentation and discussion:  Eiusdemmodi