Main > Main Forum
U360 will not load maps with Ledblinky
<< < (2/3) > >>
arzoo:
Try setting the restrictor type to None.
bbee383:
Ok.. Tried that and it didn't help.

The part that is confusing me is when I alt tab out set the joystick with the ultistick software it works fine.
When I go back to hyperspin it resets it to analog with no mapping.  :banghead:

Thanks for the help so far!
arzoo:
Ok, here's some more things to try:

I assume the map (.um) files in your ...\LEDBlinky\jdr\UltraStik folder are the ones that installed with LEDBlinky. These can be checked by copying them into the ...\program files\ultramap\maps folder and test with the Ultramap app.

If the map files are working, next we need to isolate HS and LEDBlinky.

Use Ultramap to set a 4-way map. Then disable LEDBlinky in the HS config (so LEDBlinky won't run with HS). Run HS and alt-tab out to Ultramap or Windows Game Controllers dialog to check if the sticks are still in 4-way mode. If they are, then we know HS is not causing the problem.

Next try LEDBlinky without HS; set the sticks to 8-way, then launch LEDBlinky from a Run or Cmd window with this command:
...\LEDBlinky\ledblinky.exe 1
You should see the LEDBlinky icon in the system tray. Wait about 10 seconds, then right-click the icon and select Exit to quit the app. Use Ultramap or the Windows Game Controllers dialog to check the sticks - they should be in 4-way mode which is the default that LEDBlinky uses when the FE is expected to be active. You can also check the debug.log for this:
[03/23/2012 18:44:42] Set UltraStik JDR Map [joy4way.um] for FE.

If the log shows the sticks set to 4-way but they remained in 8-way (or switched to analog), then something with the ultrastik.dll is not working.

Post the results back here (or PM or email).
Also, what version of Windows are you running?

bbee383:
Ok here are the results

Map files are working correctly.
Works in Hyperspin with ledblinky disabled
Ran Ledblinky from command line with set to 8way...lost the mapping (switched to analog) and it is loading according to the logs.
bbee383:
Win 7 64bit
Navigation
Message Index
Next page
Previous page

Go to full version