Main > Main Forum

U360 will not load maps with Ledblinky

Pages: (1/3) > >>

bbee383:

I am having an issue with my u360 joysticks with ledblinky and Hyperspin.
I am pretty sure I am missing something in my configuration.

The joysticks work good but when you enter a game through Hyperspin/ledblinky it will not load the maps (IE 4 way, 8 way)

I have joystick_map 7778...4445 set in the mame.ini file
Ledblinky is checked for the U360.

Here is a debug from Ledblinky

--- Code: ---[03/21/2012 20:42:43] LEDBlinky v5.0.0.4
[03/21/2012 20:42:43] Detected LED Devices: 000000001000000000000000
[03/21/2012 20:42:43] LEDBlinkyControls.xml: v1.0 01/16/2009 15:38:09
[03/21/2012 20:42:43] 5 mame games loaded from LEDBlinkyControls.xml
[03/21/2012 20:42:43] 1 emulator games loaded from LEDBlinkyControls.xml
[03/21/2012 20:42:51] Game Start Key (P1): 13
[03/21/2012 20:42:51] Game Start Key (P2): 69
[03/21/2012 20:42:51] Loaded LWAX File for FE Start: [Pattern26.lwax]. Single loop only.
[03/21/2012 20:42:57] Emulator: [MAME]
[03/21/2012 20:42:57] Controls.dat INI file Version=0.141.1, Time=2011-01-05 18:17:26, Generated by=SirPoonga
[03/21/2012 20:42:57] 1056 games loaded from controls.ini
[03/21/2012 20:42:57] 6851 games loaded from Mame.xml
[03/21/2012 20:42:57] 0 clones loaded from Mame.xml
[03/21/2012 20:42:57] 1389 games loaded from Colors.ini
[03/21/2012 20:43:14] ROM/Game: [DKONG] Controls: [MAME-DKONG]
[03/21/2012 20:43:14] Control List for DKONG: |P1_BUTTON1|P1_JOYSTICK_LEFT|P1_JOYSTICK_DOWN|P1_JOYSTICK_UP|P1_JOYSTICK_RIGHT|START1|COIN1|START2|COIN2|CONTROL_JOY4WAY
[03/21/2012 20:43:14] Control Speech List for DKONG: |JUMP|RUN LEFT|CLIMB DOWN LADDER|CLIMB UP LADDER|RUN RIGHT|||||4-way Joystick
[03/21/2012 20:43:14] P1_BUTTON1 (MAME-ALLGAMES): |KEYCODE_E
[03/21/2012 20:43:14] P1_JOYSTICK_LEFT (MAME-ALLGAMES): |JOYCODE_1_XAXIS_LEFT_SWITCH
[03/21/2012 20:43:14] P1_JOYSTICK_DOWN (MAME-ALLGAMES): |JOYCODE_1_YAXIS_DOWN_SWITCH
[03/21/2012 20:43:14] P1_JOYSTICK_UP (MAME-ALLGAMES): |JOYCODE_1_YAXIS_UP_SWITCH
[03/21/2012 20:43:14] P1_JOYSTICK_RIGHT (MAME-ALLGAMES): |JOYCODE_1_XAXIS_RIGHT_SWITCH
[03/21/2012 20:43:14] START1 (MAME-DEFAULT): |KEYCODE_1|JOYCODE_1_START
[03/21/2012 20:43:14] COIN1 (MAME-DEFAULT): |KEYCODE_5|JOYCODE_1_SELECT
[03/21/2012 20:43:14] START2 (MAME-DEFAULT): |KEYCODE_2|JOYCODE_2_START
[03/21/2012 20:43:14] COIN2 (MAME-DEFAULT): |KEYCODE_6|JOYCODE_2_SELECT
[03/21/2012 20:43:14] CONTROL_JOY4WAY (MAME-DEFAULT): JOY4WAY
[03/21/2012 20:43:46] Loaded LWAX File for FE Quit: [3backsweep.lwax]. Single loop only.
--- End code ---



Any help would be appreciated....

arzoo:

Try this - Enable the "Verbose Logging" option, then run your FE and launch a game.

Search the log for "UltraStik". You should see entries like this:

--- Code: ---[03/07/2011 22:55:37] Game Start Key (P1): 32
[03/07/2011 22:55:37] Game Start Key (P2): 17
[03/07/2011 22:55:37] UltraStik U360(s) detected: 1   Restrictor Type: Round

--- End code ---

--- Code: ---[03/07/2010 22:55:55] Set UltraStik JDR Map [vjoy2way.um] for DEFENDER.

--- End code ---

If you're seeing that, then LEDBlinky is configured correctly and is attempting to remap the u360s.

Next, use the Ultramap utility to confirm that the u360s are running firmware 2.3 or newer. If not, upgrade the firmware.
http://www.dndw.com/ledblinky/Support.htm#U360Problem

You can also use the Ultramap utility to make sure the sticks can be remapped and are working as expected.

bbee383:

Both u360's are at version 2.5 and work with the ultramap utility.
I will enable the verbose logging when I get home from work.

That's for the help!

arzoo:

Another thing you can try is to start up the Windows Game Controller app (before running your FE), then while the FE is active, alt-tab over to the controller app and see if the joysticks are in 4-way mode. This would help confirm (or not) that LEDBlinky is setting the map correctly. You can also alt-tab out of MAME and see if the sticks are set to the expected map for the selected game.

bbee383:


--- Code: ---[03/22/2012 17:18:07] [JDR]
[03/22/2012 17:18:07] UseGPWiz49=0
[03/22/2012 17:18:07] UseUltraStik=1
[03/22/2012 17:18:07] UltraStikRestrictorType=9
[03/22/2012 17:18:07] [OtherSettings]
--- End code ---

--- Code: ---[03/22/2012 17:18:15] UltraStik U360(s) detected: 2   Restrictor Type: 4way/8way/Circular
[03/22/2012 17:18:15] Set UltraStik JDR Map [joy4way.um] for FE.
[03/22/2012 17:18:15] Loaded LWAX File for FE Start: [Pattern51.lwax]. Single loop only.
[03/22/2012 17:18:15] Received Event - Queue:[1] Msg:[7~MAME].
--- End code ---

Looks like it loads in the front end...checked with Windows Game Controller app and joystick is not in 4-way


--- Code: ---Event: FEGameStart
[03/22/2012 17:19:06] Using Default Mame Outputs: LED0=Start1~LED1=Start2
[03/22/2012 17:19:06] ROM/Game: [DEFENDER] Controls: [MAME-DEFENDER]
[03/22/2012 17:19:06] Control List for DEFENDER: |P1_BUTTON1|P1_BUTTON2|P1_BUTTON3|P1_BUTTON4|P1_BUTTON5|P1_JOYSTICK_DOWN|P1_JOYSTICK_UP|START1|COIN1|START2|COIN2|CONTROL_VJOY2WAY
[03/22/2012 17:19:06] Control Speech List for DEFENDER: |FIRE|THRUST|SMART BOMB|HYPERSPACE|REVERSE|DOWN|UP|||||2-way Joystick (Vertical)
[03/22/2012 17:19:06] P1_BUTTON1 (MAME-ALLGAMES): |KEYCODE_E
[03/22/2012 17:19:06] P1_BUTTON2 (MAME-ALLGAMES): |KEYCODE_R
[03/22/2012 17:19:06] P1_BUTTON3 (MAME-ALLGAMES): |KEYCODE_SPACE
[03/22/2012 17:19:07] P1_BUTTON4 (MAME-ALLGAMES): |KEYCODE_T
[03/22/2012 17:19:07] P1_BUTTON5 (MAME-ALLGAMES): |KEYCODE_Z
[03/22/2012 17:19:07] P1_JOYSTICK_DOWN (MAME-ALLGAMES): |JOYCODE_1_YAXIS_DOWN_SWITCH
[03/22/2012 17:19:07] P1_JOYSTICK_UP (MAME-ALLGAMES): |JOYCODE_1_YAXIS_UP_SWITCH
[03/22/2012 17:19:07] START1 (MAME-DEFAULT): |KEYCODE_1|JOYCODE_1_START
[03/22/2012 17:19:07] COIN1 (MAME-DEFAULT): |KEYCODE_5|JOYCODE_1_SELECT
[03/22/2012 17:19:07] START2 (MAME-DEFAULT): |KEYCODE_2|JOYCODE_2_START
[03/22/2012 17:19:07] COIN2 (MAME-DEFAULT): |KEYCODE_6|JOYCODE_2_SELECT
[03/22/2012 17:19:07] CONTROL_VJOY2WAY (MAME-DEFAULT): VJOY2WAY
[03/22/2012 17:19:07] Device 9; PBA:48,48,48,48,48,48,0,48,0,48,48,48,48,48,48,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,48,0,0,0,0,0,0,0,0,0,0,0,0,0,0,48,0,0,0,0,0,48
[03/22/2012 17:19:07] Device 9; SBA:191,126,0,0,0,4,0,130,3
[03/22/2012 17:19:07] Speak [Defender ]
[03/22/2012 17:19:08] Speak [FIRE]
[03/22/2012 17:19:09] Device 9; SBA:191,126,0,0,0,4,0,130,3
[03/22/2012 17:19:09] Speak [THRUST]
[03/22/2012 17:19:10] Device 9; SBA:191,126,0,0,0,4,0,130,3
[03/22/2012 17:19:10] Speak [SMART BOMB]
[03/22/2012 17:19:11] Device 9; SBA:191,126,0,0,0,4,0,130,3
[03/22/2012 17:19:11] Speak [HYPERSPACE]
[03/22/2012 17:19:13] Device 9; SBA:191,126,0,0,0,4,0,130,3
[03/22/2012 17:19:13] Speak [REVERSE]
[03/22/2012 17:19:14] Device 9; SBA:191,126,0,0,0,4,0,130,3
[03/22/2012 17:19:14] Device 9; PBA:48,48,48,48,48,48,0,48,0,48,48,48,48,48,48,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,48,0,0,0,0,0,0,0,0,0,0,0,0,0,0,48,0,0,0,0,0,48
[03/22/2012 17:19:14] Speak [Primary Control]
[03/22/2012 17:19:15] Speak [2-way Joystick (Vertical)]
[03/22/2012 17:19:18] 1 MAME Output messages queued up.
[03/22/2012 17:19:18] Set UltraStik JDR Map [vjoy2way.um] for DEFENDER.
--- End code ---

Does not work in mame ether

Pages: (1/3) > >>

Go to full version