| Main > Main Forum |
| Making JAMMA Adaptors |
| << < (2/2) |
| Mac Green:
Thanks for the replies everybody i thinnk this is what im gonna do get one of these http://www.jammaparts.net/misc/76-28-pin-edge-connector.html and one of these http://www.ebay.com/itm/JAMMA-Fingerboard-JB-3-Non-JAMMA-to-JAMMA-Adapter-/150575935568?pt=LH_DefaultDomain_0&hash=item230f067050#ht_1612wt_1344 |
| Unstupid:
$10 here... http://www.paradisearcadeshop.com/en/39-jamma-harnesses How much is your time worth? How many hours would it take you to make the harness? |
| Nephasth:
--- Quote from: Unstupid on March 02, 2012, 09:46:44 pm ---$10 here... http://www.paradisearcadeshop.com/en/39-jamma-harnesses How much is your time worth? How many hours would it take you to make the harness? --- End quote --- He's not making a harness. He's making an adapter to plug a non-jamma pcb into a cabinet that is wired for jamma. Basically one of these minus the sound amp... |
| Franco B:
--- Quote from: Nephasth on March 01, 2012, 05:39:00 pm ---Franco B does top notch work! --- End quote --- Thanks for the props :) --- Quote from: paigeoliver on March 01, 2012, 07:33:34 pm ---In the past when it was a cheap board I would just mount the board onto a piece of wood with a jamma fingerboard and just solder wires right from the board to the fingerboard. Faster and cheaper than making the adaptor. When I sold my board collection the boards I did this to went way over market value too. --- End quote --- My #1 pet PCB hate. If I found someone who did this to an original PCB I would find it hard not to punch them in the face, and I'm not a violent person :bat |
| Mac Green:
--- Quote from: Franco B on March 03, 2012, 04:37:12 pm --- --- Quote from: Nephasth on March 01, 2012, 05:39:00 pm ---Franco B does top notch work! --- End quote --- Thanks for the props :) --- Quote from: paigeoliver on March 01, 2012, 07:33:34 pm ---In the past when it was a cheap board I would just mount the board onto a piece of wood with a jamma fingerboard and just solder wires right from the board to the fingerboard. Faster and cheaper than making the adaptor. When I sold my board collection the boards I did this to went way over market value too. --- End quote --- My #1 pet PCB hate. If I found someone who did this to an original PCB I would find it hard not to punch them in the face, and I'm not a violent person :bat --- End quote --- :stupid Agreed |
| Navigation |
| Message Index |
| Previous page |