Main > Main Forum
Removing Magnets from Cups - I need your crazy ideas!
<< < (2/2)
javeryh:
yup... it has been sitting in my basement for almost 3 years!  It works but I still have a bunch of stuff to do in order to finish.  A lot of it might just be out of my skill set.  I haven't worked on any project since 2009 believe it or not - life just gets in the way I guess.  The kids are involved in a million activities so there just isn't any free time.  My wife is due again in May too so I'll be even busier!

I finally dragged the juke to the main floor of the house and put it on a folding table to try and motivate me to finish.  I can do it but I'm going to need help!

Anyway, the magnets/cups are countersunk just a bit too much and aren't securing the back door in place.  We're talking about 1/16" or less.  It is really giving me fits.  I want the back door to be removable but I didn't want any screw heads showing so I thought the earth magnets would allow for just that.  At this point I'm fine with losing the magnets and reordering new ones once I get the cup depth right - can I just drill through them (I don't have a dremel)?  Is there anything inside like plutonium or is it solid metal?

EDIT: I should add that there are two pieces in the picture... the rare earth magnet sits inside of a metal (non-magnetic) cup which you can kind of see the border of around the magnet.  The cup has a hole in the bottom for a screw which is how it is secured in place.  Obviously, the magnet blocks my access to the screw to remove the whole thing.  It is secured in 3/4" MDF.

Would a larger rare earth magnet be able to pull it out?  I read on Rockler's site that the cup actually adds 4x the strength to the little magnet.  Ugh.
TopJimmyCooks:
Can you attack/unthread/drive out the screw from the backside or is it tight in there?  Looks tight in there.  If you can find an electromagnet big enough to pull it out, don't bring your wristwatch or credit cards anywhere near it!
javeryh:
Ugh.  I just fired up the computer for the first time in ages and the touch screen isn't working properly.  The left side of the screen works fine but the further you go to the right the further away from my finger the pointer gets (to the right).  It is so frustrating.  I have no idea what the issue could be.

EDIT: Maybe I just need to recalibrate the touchscreen?
Navigation
Message Index
Previous page

Go to full version