| Main > Main Forum |
| Removing Magnets from Cups - I need your crazy ideas! |
| (1/2) > >> |
| javeryh:
OK, I'm out of ideas... how am I supposed to remove the magnet from the countersunk cup in the picture? I can't even slip a razor blade in there to pop it out. Any ideas? Of course googling it I get responses like "if you are ever planning to remove the magnet just file a notch in the side of the cup" - I'm WAY past that (obviously). Why isn't this built into the design? Any help would be GREAT. Thanks! :cheers: |
| EightBySix:
Do you need to keep the magnet? If not, I would dremmel a slot into it and lever it out with a screwdriver. Alternatively, demagnetise it and fill over it maybe? What it anyway? |
| paigeoliver:
That looks like wood, right? Get a holesaw a bit bigger than the magnet. Drill in around it, use a screwdriver to pop out the whole hunk of wood around it, fill the hole in with wood filler. |
| DaOld Man:
Is this on your Mountain Jukebox, James? |
| jimmy2x2x:
A large rare earth magnet or an electro magnet should pull it out without any damage as long as its only magnetism holding it in place. |
| Navigation |
| Message Index |
| Next page |