| Main > Main Forum |
| Is Tron 4 or 8 way? |
| << < (4/6) > >> |
| Le Chuck:
--- Quote from: darthpaul on February 24, 2012, 11:13:14 pm ---Been waiting for your input on this Le Chuck, I'm considering attempting your Tron solution. --- End quote --- The software solution is really a neat piece of work and takes about an hour or so start through testing if you follow the directions and don't try to do your own thing like I did. I want to make another wireless triggerstick using a Tron handle, would be too easy, more room for the wireless presentation clicker also. By the way the battery life has been fine thus far, haven't had to change out yet. |
| trekking95:
I don't mind it being a fixed handle, I might even make a Tron control panel as not to clutter the one I have. ;D But what about the restrictor and the MiniGrip Stick, would it work together? And is the Tron restrictor the same as the DOT one? So those Tron handles from GGG have no button on the back like DOT ones but the MiniGrip Stick has the back button. I was thinking about drilling a little hole in the backplate from the Tron handle then wire up a small push button like the DOT has. Then I could play DOT and not waste the back button on the MiniGrip Stick. What do you think? ;D EDIT: Also does anyone know how to mount the MiniGrip stick to a 1/4 inch wood control panel? |
| trekking95:
:bump Really need to know, guys! ;D |
| Le Chuck:
--- Quote from: trekking95 on February 25, 2012, 07:39:36 pm --- :bump Really need to know, guys! ;D --- End quote --- Tron restrictor is made for the Tron stick. Without looking at the bottom of the Ultimarc trigger stick I can't say for sure but I am 99.9% sure you would have to do one helluva remodel to get the Tron stick restrictor repro to work with that joy. DOT does not use the same restrictor, that game is pure 8-way and also has a push pull spinner. There are three ways to get a push pull spinner if that is what you want. 1) Find a DOT, Zwackery, or other push pull original spinner CP and harvest it 2) Buy an Apache Control push pull 3) Find somebody who is totally down on their luck and thus willing to sell you their totally awesome Turbo Twist High-Low since Randy of GGG is out of parts to make more. I have a TRON CP. It is untested and unclean as I just go it but the mechanics on the trigger stick are in good shape. The leaf switches have good movement and the rubber grommets are still supple. No idea if the spinner opti board works but all part are there. All it should need would be an optipac and a good cleaning to rock and roll. PM me if interested. If I was going to rock a frankenpanel I would make sure that the Tron joyrod was present and accounted for. Committing to a frankenpanel with a Tron substitute just seems to not be worth the trouble. |
| trekking95:
So how much is a Apache Control push pull spinner? |
| Navigation |
| Message Index |
| Next page |
| Previous page |