Main > Main Forum

Drilling button holes in Plexi/Lexan?

Pages: << < (2/4) > >>

Knievel:

Router is the way to go for sure. You can get a plunge bit that will allow you to drill though and then route out the hole.

If you don't have one I would recommend using Lexan instead of Plexi with drill bits.
It's a softer material and should drill easier, and without cracking.

BobA:

+1 for the router and trim bit.

kelemvor:

Do I need to run the router on a slow speed or can I let it crank?

BobA:

Run it at regular speed and the plexi will cut like butter.



monkey puzzle:

I used a hole saw for all my button holes with no problem. Have the drill on a high speed, but apply very little pressure. If you want to be cautious sandwich the plexi between 2 peices of plywood and clamp together. Take your time and don't try to rush the drilling. Do a few practice holes first on spare plexi.

Pages: << < (2/4) > >>

Go to full version