Main > Main Forum

Will this burn my apartment complex down? Mains Separating

Pages: << < (2/3) > >>

BobA:

Not a safe setup.  :-[ Use marrettes as Richard suggested.  You will have to cut off the spade lugs or get a terminal block where you can attach the spade lugs under a screw.

Bramlet:

Ok I would rather get a terminal block because these wires are as short as they can go and I want a quick reconversion process.

ark_ader:


--- Quote from: BobA on February 10, 2012, 10:17:08 pm ---Not a safe setup.  :-[ Use marrettes as Richard suggested.  You will have to cut off the spade lugs or get a terminal block where you can attach the spade lugs under a screw.

--- End quote ---
+ 100  :applaud:

CheffoJeffo:


--- Quote from: ark_ader on February 11, 2012, 08:14:43 am ---
--- Quote from: BobA on February 10, 2012, 10:17:08 pm ---Not a safe setup.  :-[ Use marrettes as Richard suggested.  You will have to cut off the spade lugs or get a terminal block where you can attach the spade lugs under a screw.

--- End quote ---
+ 100  :applaud:

--- End quote ---

+1000

Taping together wires with a possible nebulous connection, then taping them to a flammable material ain't a particularly good idea.

Since this looks like a dedicated cab, I am hoping that any required monitor isolation is being done.

Thenasty:

unused wires should be snip/remove off.

Pages: << < (2/3) > >>

Go to full version