Main > Main Forum

Lighting Paradise Arcade 5v LED Lighted Arcade Pushbuttons

Pages: << < (2/3) > >>

daillest319:

so would these be fine. also what does the .250 stand for? or are they suppose to be .187


http://www.paradisearcadeshop.com/en/jamma-harnesses/407-30-connection-black-daisy-chain-110.html

http://www.paradisearcadeshop.com/en/jamma-harnesses/406-30-connection-black-daisy-chain-110.html

Nephasth:

Looks like those will be fine. Judging by the pic of the button, the LED terminals look to be .250". Email Paradise to make sure though.

daillest319:

customer service told me .250 but at the of the button page it states the following....
So would the .250 fit? or do they have to be .187.


-Made to fit 24mm to 30mm holes (this includes 1 1/8 holes)
-Great for 1/16 inch metal to 3/4 inch wood control panels
-Buttons come complete with all parts needed (LED, microswitch, locking nut, and washer)
-Happ quality microswitches with .187" terminals

Also would i need the following link below to be on the wire or do i just need to split it somehow.
http://www.paradisearcadeshop.com/en/jamma-harnesses/66-ezswitch-off-led-button-control.html

Nephasth:

The terminals for the microswitch are .187" (but are stepped and can also accept a .250" female quick disconnect, so you can use either for the microswitches), the terminals for the LEDs are .250" (can't use .187" female quick disconnects on the LED terminals).


--- Quote from: daillest319 on February 07, 2012, 08:41:26 am ---Also would i need the following link below to be on the wire or do i just need to split it somehow.
http://www.paradisearcadeshop.com/en/jamma-harnesses/66-ezswitch-off-led-button-control.html

--- End quote ---

You wouldn't need that unless you want your LEDs to turn off when that particular button is pushed.

daillest319:

Thank you Nephasth for all your help I do really appreciate it. Now im just waiting for my cables to come in  ;D

Pages: << < (2/3) > >>

Go to full version