| Main > Main Forum |
| Plastic or glass |
| << < (2/9) > >> |
| BobA:
Glass is resistant to scratches and not bothered by lint as much (less static) but you have to get it cut while plastics you can cut yourself. If you have a rectangular area to fill and you can take proper measurements then you are good to go but if your cab is a little off then the glass will not fit. |
| ark_ader:
Glass with those sheets you apply to car windows for tint. Hate cutting plexi, but if you do try using a tile cutter! ;) |
| Donkbaca:
Applying the tint is a pain in the ass. I did that on my cab, it sucked, i wouldn't do it again. Get smoked plexi from tap plastics. Its cheaper, lighter, and in the event something happens that would cause it to break, you don't have a dangerous situation on your hands. I wouldn't worry about scratches, there aren't many situations where it would be subject to getting scratched, plus you can buff out light scratches with novus. |
| Blanka:
If you can hide a part behind the wood.... IKEA sells smoked hardened glass for close to nothing, as long as you buy it billy-shelf sized. Glass+1 Glass is flat, plastic hangs through... giving curvy reflections. What screen do you put behind? If LCD, go for clear glass. The panel is black enough already. |
| DaveMMR:
I went with glass on my cabinet and while I like the looks of it, I may just go with plexi on further builds. The extra expense (albeit $30 per sheet) and lack of control put me off. Not to mention I have to take into consideration more weight when mounting it (with plexi, you can pretty much even just screw it in where it's out of sight.) Plus, I hate working with glass in general. If the Plexi gets messed up, it's cheap and easy enough to cut a new sheet to replace it. |
| Navigation |
| Message Index |
| Next page |
| Previous page |