Main > Main Forum

Just bought Robocop for $140

Pages: << < (3/5) > >>

Bramlet:

Here is another video with the same potato. It seems the jiggle I want to film is a little too fast to capture. It is jiggling horizontally I suppose. You can sort of see it on these two videos but it looks smoother than it is. Am I going to need a cap kit?



mgb:

I haven't been to watch the video yet. But I would check to see if the horiz hold pot is at fault (either a bad pot or bad solder joint where the pot connects to the board). You can check it by having someone watch the monitor (or use a mirror) and try messing with the horiz hold pot by pushing lightly on it or slightly jiggling it and turning it a little bit. You may also want to verify that your sync lines are plugged in firmly. From the jamma harness you should have one or two connectors which contain the red, green, blue and ground and sync.
Make sure that the wires are tight in the connectors and that the connectors are tight to the board. You can even verify they are cool on the jamma harness at the game board by wiggleing them and seeing if anything goes screwy
Good luck

Well Fed Games:

http://www.urbandictionary.com/define.php?term=Potato&defid=6321730

I must be getting old- I have to google slang words.

yotsuya:

I thought it was some funny autocorrect issue myself.

mgb:

Yeah I was unsure too but was afraid to ask  ;D

Pages: << < (3/5) > >>

Go to full version