Main > Main Forum
Can I reverse the U-TRAK's axis without resoldering the wires?
dekar24k:
So .. I mounted the U-TRAK "upside down" on my control panel... ::) I don't want to remove it and put it the correct way (mostly because I have already tunneled the wires from it through the cabinet), so I was wondering if I can somehow reverse the X and Y axis without cutting and re-soldering the wires? Right now up is down, down is up, left is right .. you get it .. :)
Thanks!
taylormadelv:
If you are using mame, it is as simple as going into the analog tab control and reversing everything. If this is going to a real arcade PCB, well then you will have to cut or move the wires. And I will actually have to take my U-Tarck apart as well, as I will be changing it from arcade pcb control to USB control for mame, it's a PITA but if you do it right, it will only have to be done once. I really like this trackball, my wife and I have punished it playing World Class Bowling Deluxe for months without any issues at all.
dekar24k:
Thanks for the info! If I were to only use MAME on my cab then I'd just swap them in the MAME config, but I guess I'll just cut and swap the wires around instead. :)
Yes, the U-TRAK is really awesome. I used it in my previous cab also. ;)
AndyWarne:
There is no need to cut the wires. The pins, with wires attached can be pushed out of the plastic parts of the 2 white connectors. Just swap purple/blue and yellow/green.
dekar24k:
--- Quote from: AndyWarne on January 23, 2012, 10:36:49 am ---There is no need to cut the wires. The pins, with wires attached can be pushed out of the plastic parts of the 2 white connectors. Just swap purple/blue and yellow/green.
--- End quote ---
Sorry, forgot to update this thread. I did exactly what you said Andy at it worked perfectly. Only took me 30 seconds also. :) Thanks!