| Main > Main Forum |
| Golden Tee '99 Playing blind WG U2000 chassis |
| (1/1) |
| searshouse:
I have a Golden Tee '99 w/ a WG U2000 chassis that is playing blind. I have troubleshooted to a point but now I'm stuck. - On start-up, there is no sound from the tube, chassis, flyback whatsoever. No static noise (tube warming up), no neck glow. - No visible cracks or oozing from flyback (just dust on it and surrounding components) no hissing or clicking and no arc/snap discharge to ground from flyback anode - I've tested most caps, in-circuit (w/ cap analyzer 88), and tested okay. - I tested power supply side of board by isolating it and testing w/ 75 w light bulb, it stayed lit. Pointing to the deflection side of board? - Fuse-good. - B+ voltage @ test point 202 was around 170 vdc-180 (I tested w/ chassis in machine everything still hooked up). - H.O.T. Q704 - The collector to ground measured 183 vdc. I removed HOT ,and diode tested- good. Where to go from here? The CRT? flyback? ??? My knowledge of electronics is little more than hobby. Any help would be greatly appreciated. It's been down for over a year, I'm just dying to get the machine back up and running. :cry: |
| Navigation |
| Message Index |