| Main > Main Forum |
| Atari 4" Trackball Wood CP Flush Mount |
| (1/2) > >> |
| yo1dog:
So I am considering getting an Atari 4" trackball because I love their huge size (that's what she said). Problem is I have a 3/4" wood control panel and I am trying to keep everything flush mounted. In this case I would not mind some bolt heads showing. I was thinking of removing the plexiglass and metal top, drilling the circular hole for the ball, and routing the wood to 1/8" thick for the trackball base. Then I could either drive bolts through the top or put something underneath it to hold it up. I am worried that the 1/8" wood would be too thin to support someone smashing on the trackball. Therefore, bolting from the top will not be a viable option. I think the best solution is to create something to hold it from underneath. It would secure the trackball against the control panel and in place. This would allow for a completely flush mount as well. See the following crapagram: Red: Tranckball Blue: Harness/support Black: Control Panel Grey: Bolts that holds harness/support to control panel What do you guys think? Edit: The wood is 3/4" Birch "Plywood Hardwood" and I do NOT have any plexiglass overlay. |
| newmanfamilyvlogs:
i wonder if you could fabricate something like these in a bigger size: http://www.twistedquarter.com/index.php?main_page=product_info&cPath=113_120&products_id=793&zenid=7rs2f6sqvbjrs70dp25rgod240 |
| yo1dog:
My control panel is bare wood (no paint, graphic overlay, plexiglass, etc) with just a finish, and I am trying to keep it that way. A big black mounting plate would be so ugly! |
| Crazy Cooter:
Build a "basket"to hold it from the bottom (in addition to routing the top thin). |
| yo1dog:
That's exactly what I was saying |
| Navigation |
| Message Index |
| Next page |