Main > Main Forum
How build in LCD monitor?
one8seven:
Hi guys,
Finaly find a new LCD monitor for my midway cab : http://www.asus.com/Display/LCD_Monitors/VE258Q/
Can you guide me on how to build in/mount an LCD into an arcade cab?
Thanks in advance,
one8seven
GregD:
There are many different ways to do this. Some use VESA Mounts. Some use the VESA mounting holes to screw to a piece of wood running across the cabinet. Some just screw the monitor down by the stand onto a shelf. You can decase it and use brackets but that is probably not necessary.
BobA:
If you do make 100mm by 100mm holes in a board and mount it in your cab on cleats or brackets you will probably have to get 4 M4 screws of the proper length to mount the screen. These are metric and available at many hardware or bolt and screw stores. The screws go into the screen about 10mm so you will need 10mm plus whatever the thickness of your material is.
one8seven:
Ok thanks for the quick replies guys!
Perhaps any pics or videos arround here?
BobA:
Picture