Main > Main Forum

Monitor wiring-Quick Help!

Pages: << < (5/6) > >>

honkey:


--- Quote from: Nephasth on December 21, 2011, 06:47:18 pm ---
--- Quote from: honkey on December 21, 2011, 05:43:00 pm ---I am using Soft15khz, but I am not the one with a J-PAC.video card is an ATI Radeon HD 4830. In that YouTube video of my problem, I had the setting to 512x448.

--- End quote ---

Sorry for the confusion... Hmm, was that the best you could get the monitor? Have you tried with the resolution at 640x480?

--- End quote ---

No I hadn't tried that... I thought starting low was best? The best I could get with the monitor were those flashing colors, but Soft15khz wouldn't have had time to kick in yet. I had literally just pressed the power button when that started.

Nephasth:

Also, is your composite sync wire connected to both pins 13 & 14 on your dsub connector?

honkey:


--- Quote from: Nephasth link=topic=116706
.msg1237361#msg1237361 date=1324569305 ---Also, is your composite sync wire connected to both pins 13 & 14 on your dsub connector?

--- End quote ---

No... Just pin 13.

Nephasth:

That might be your problem, composite sync is H and V combined. Either connect pins 13 and 14 or run a wire from pin 14 to -V Sync on your monitor's input header (if it were me, I would run another wire).

honkey:


--- Quote from: Nephasth on December 22, 2011, 03:09:26 pm ---That might be your problem, composite sync is H and V combined. Either connect pins 13 and 14 or run a wire from pin 14 to -V Sync on your monitor's input header (if it were me, I would run another wire).

--- End quote ---

Thank you! I will give it a try and let you know.

Pages: << < (5/6) > >>

Go to full version