| Main > Main Forum |
| Monitor wiring-Quick Help! |
| << < (4/6) > >> |
| Nephasth:
Which pin do your have your composite sync signal connected to on the monitor's input header? |
| honkey:
--- Quote from: Nephasth on December 21, 2011, 02:16:07 am ---Which pin do your have your composite sync signal connected to on the monitor's input header? --- End quote --- Looks like -H.Sync It had a great picture when the Tekken PCB was in there, but I sold the board last week. |
| Nephasth:
Ok, we have got bits and pieces of information here and there. In my B/S/T thread you said you are using a J-pac. If you are, you shouldn't need to hack or make your own cable, just use a VGA cable to go from your computer to your J-pac. You're composite sync is connected to -H Sync on the monitor, which should be fine. But what are you using for a video card? An ArcadeVGA? Or are you using Soft15khz? |
| honkey:
I am using Soft15khz, but I am not the one with a J-PAC.video card is an ATI Radeon HD 4830. In that YouTube video of my problem, I had the setting to 512x448. |
| Nephasth:
--- Quote from: honkey on December 21, 2011, 05:43:00 pm ---I am using Soft15khz, but I am not the one with a J-PAC.video card is an ATI Radeon HD 4830. In that YouTube video of my problem, I had the setting to 512x448. --- End quote --- Sorry for the confusion... Hmm, was that the best you could get the monitor? Have you tried with the resolution at 640x480? |
| Navigation |
| Message Index |
| Next page |
| Previous page |