Main > Main Forum

Is this a good monitor for Mame?

Pages: << < (2/3) > >>

ahofle:

My 2 cents...that's a great monitor size for a MAME cab. As mentioned, you can either get an ArcadeVGA card, or install the CRT Emu Driver custom ATI drivers (you'll need to use an ATI card) and use GroovyMAME.  You'll need to run Windows at 640x480i. Horizontal games will look terrific on that thing.  One thing to keep in mind with a CGA only monitor is that you'll have to compromise on the vertical games a bit.  Most of them will display fine, but the 280 and above line games (Galaga, Pacman for example) will have to be adjusted so that the top and bottom slightly cut off a bit.  If you try and make them fit, then the horizontal games will have a bit of space on the top and bottom, so you have to figure out a good compromise between the two.


--- Quote from: gatordad on November 29, 2011, 11:20:30 pm ---If you want to run everything in native resolutions try to find a digital multisync
--- End quote ---

The other option is to have a rotating CGA monitor (or a separate vertical and horizontal cab) in which case you get perfect resolutions on 99.9% of arcade games.  >:D

EDIT:
Just noticed that this monitor also does EGA (512x384 roughly) although I think you may need to manually switch it to use that resolution.  Maybe worth asking the seller about that.  That would let you run games like 720, Super Sprint and Paperboy at their native res.

wizkid32:


--- Quote from: Jack Burton on November 29, 2011, 10:28:05 pm ---
--- Quote from: wizkid32 on November 29, 2011, 08:56:40 pm ---Looks good.  Keep in mind that you will have to figure out how to deal with the refresh rate, which is incompatible with Windows (and every other OS out there!).
The other alternative is a TV, which you might consider if you want to save money.

Link to a page about refresh rates:
http://www.tiptonware.com/mame_machine/Original_Cabinet.htm

--- End quote ---

You mean the sync rate, not the refresh rate.  Two different things.  But yes, out of the box Windows can't sync to 15khz.  That's easily enough corrected through the use of hardware such as an ArcadeVGA graphics card, or programs such as Soft 15khz, advancemame, or GroovyMame.

Additionally, any Linux distribution will allow the user to set their display pretty much however they like as long you know what modeline to specify. 

As to the question of the OP.  Well, there's not much to go by in the description of the auction.  It is indeed a CRT, and appears to have a curved screen.  It might be a Neotec since it is dual-sync.  It should have a nice "original" looking picture as long as it arrives in working order. 

--- End quote ---

Well you're right.  Not refresh rate (  :( ), but Scan Rate.  You'll have to forgive my error.  I have read a lot, but that is all I know about this stuff. :dizzy:
I don't know where you got sync rate though...

Jack Burton:

Scan Rate is more specific and is the correct technical term, but when dealing with monitors it's often phrased in terms of a monitor being able to sync to a specific frequency, e.g. 15-31 kHz.  



wizkid32:

Ah.  I see.  Thank you for clarifying that.  You can see by my post count that I am still a newbie, and rightly so.  Sorry for my bad information!

BrentRadio:

Yes, I now know that I want/need a 25" digital multisync as I want to run all games at native resolution using the ArcadeVGA3000.

So who has a new one for sale? Anyone here? What about a used one?

Somebody has to have one somewhere!

Thanks for the replies.

Pages: << < (2/3) > >>

Go to full version