| Main > Main Forum |
| ipac4 issue - p3 and p4 stopped working |
| (1/1) |
| strith:
I have an older ipac4 - ps/2 with the jumpers in the center. I added 4 buttons to my machine as coin buttons and when I couldn't get the buttons to work with the coin door inputs (I tried doubling them, coin door (1) coin button (1) both set to 5, didn't work). So, I moved the jumper from MAME to ALT, I reprogrammed ipac4 which kept giving me an error message after I hit program. Suddenly p3 and p4 stopped working. I found this thread http://forum.arcadecontrols.com/index.php?topic=88198.0 somebody mentioned unplug the ipac from the machine. I did that and it worked again. I hit program again, and all the coin buttons worked. It's been about 4 days now since I reprogrammed and now p3 and p4 stopped working again. I unplugged and repeated the process, and nothing. It's wired correctly, it's been wired correctly for 7 years and I double checked before I wrote this. Has anybody else had this problem? Is there a solution? |
| cdbrown:
Send an email to Andy at Ultimarc. Maybe the onboard chip which stores the ALT settings has died. |
| Navigation |
| Message Index |