Main > Main Forum
black control panel bolts
(1/3) > >>
yaksplat:
Any suggestions on what to use to hold down the plexiglass on the control panel?  I seem to remember small black carraige type bolts in the arcades on control panels.  But i haven't been in an arcade in 20 years....

Thanks!
Nephasth:
That's what I used for my Arkanoid CP. The buttons also help hold down the plexi.
yaksplat:
are those anything specific, or just a standard hardware store item?
bkenobi:
Bob Roberts sells them.

http://www.therealbobroberts.net/parts.html#hardware

And the details:  

Carriage bolts 8-32 x 1/2" shiny w nuts (Pac CP) 10 for   $3.25
Carriage bolts 8-32 x 1 1/8" yellow 4 for   $2.00
Carriage Bolts 8-32 x 1 1/2" Shiny 10 For   $4.00
Carriage Bolts 8-32 x 1 1/2" Black 10 For   $5.00
Carriage bolts 3/16" x 1 1/4" black 10 for   $2.00
Carriage bolts 3/16" x 1 1/4" stainless 8 for   $3.00
3/16" x 1 1/4" Black Carriage Bolts 10 For   $4.00
Carriage bolts 3/16" x 2" black 10 for   $2.50
Carriage bolts 3/16" x 3" black 10 for   $3.00
Necro:
A few other places do as well which are much easier to order from...can't recall where though :/ 
Navigation
Message Index
Next page

Go to full version