| Main > Main Forum |
| TV Size Vs Cab Size Questions |
| (1/4) > >> |
| LASmith132:
Hey Guys, ;D I am going to use Sony KV-32FS120 32-Inch FD Trinitron WEGA Flat-Screen CRT TV for my monitor. Its a heavy motha, i know. I have never built a cab before, Does anyone know how wide and deep I should make the cab for that specific TV? I'm building the cab out of MDF 3/4". Also for that specific TV whats the best way to to make a monitor bezel? Thanks everyone for your input. :applaud: |
| Donkbaca:
The depth of the cab will pretty much be dictated by two things: 1 is the depth of the tv itself, and 2 is the distance from the screen to the player. As a general view, most people can comfortably see things that are no closer than 1 inch for every inch of diagnol, so that means that for a 32 inch monitor, you should try to have the players' eyes about 32 inches away from the screen. In short, you are looking at a pretty beefy cab. I was going to use a 33 inch tv in my cab build, and then ditched it, figuring it would be too big. My advice: 1) Build a showcase cab 2) Mount the monitor vertical like Malenko did in his KI2 cab ( do a search for Malenko Killer Instinct 2) 3) get a new monitor I just think a traditional build with a monitor that big will be too beefy and your wife/girlfriend will hate it and it will end up in the garage. |
| Turnarcades:
Our rule of thumb when planning is to always build a cabinet to the size of the screen being fitted. Make the cabinet fit exactly to the size of your TV allowing very little extra, and you'll get a much better fit. You will not need to allow extra as cabinet venting and plastic casing cutting/removal should always be done to aid airflow and heat dispersal anyway. |
| LASmith132:
would a 27inch tube work better? |
| Donkbaca:
Yes |
| Navigation |
| Message Index |
| Next page |