Main > Buy/Sell/Trade - non-retail

FREE Dynamo cut-corner cabinet, Altoona, PA, USA

(1/4) > >>

severdhed:
A while ago i had to move and gave away a cabinet to a friend...well, several years went by, they never did anything with it, and now they want it gone.  I don't have room for it, but i told them i'd try to find someone who would want it.

It is a Dynamo Cut-Corner cabinet that is designed for a 25" monitor.  the cabinet is empty.  The coin door is intact, not sure if it has coin mechs or not. 
It has the metal control panel intact, with a 6 button, 2 player street fighter style button layout (the picture below was taken before the other button holes were exposed through the overlay). there are no joysticks or buttons included. As far as I know, there is still a pentium 4 class PC inside it...or at least there was when i gave it to them...i can't guarantee that the pc is still in there.  there is no monitor..
this is basically just a gutted cabinet with coin door.  the monitor glass is intact, as is the puzzle fighter bezel and marquee. there were security bars over the coin doors (in the pic below), but they have been removed



this cabinet is located in Altoona PA, about halfway between Pittsburgh and Harrisburg.  It is free to whoever is willing to come and get it.  If anyone is interested, let me know and i will get you my friend's contact info.

I haven't seen the cabinet in a few years, that pic was taken the day i bought it.  I know it has set unused for 3 years or so inside in a climate controlled building.  If you have any questions, or are interested, post here...first come, first served.

*cat not included

Necro:
Cat not included?  Well, then I'm out.

Honestly though, if I didn't live so far away (near DC) I'd be tempted to get this.

That and my wife would kill me.  Once I move to the philly area and get a big house though.  THEN...THEN...no one will have everything. 

Great grab for anyone in the area.

gatordad:
Those Dynamo cabs make nice multi"s
Here is one I did in the past

smalltownguy:

--- Quote from: gatordad on October 05, 2011, 10:06:31 pm ---Those Dynamo cabs make nice multi"s
Here is one I did in the past



--- End quote ---

VERY nice. Did you save the art files for that? I'd sure like to use them for my own Dynamo multi build.

gatordad:
This is where I bought it from,
http://www.arcadeoverlays.com/storefrontprofiles/DeluxeSFItemDetail.aspx?sid=1&sfid=17232&c=390819&i=38422696

I did make some custom size adjustments, they were easy to work with and quality was good.

Someone go get the OP's empty cab.

Navigation

[0] Message Index

[#] Next page