Author Topic: EVIL MAME PROJECT!!!! >:D >:D >:D (Read 2729 times)

jayska01 · « **on:** September 25, 2011, 11:12:20 am »

After crusin the site for month or so i decided to build my own mame. at first i was really excited about building one from scratch. After doing some reading I said “no thanks”. So I went online and found a dying dynamo cab 100 bucks (not working) grab it!!!. so now starts the tear down then rebluid!!!

jayska01 · « **Reply #1 on:** September 25, 2011, 11:36:06 am »

So at this its gutting time

Here is my plan
Fix old wodding working and paint
Castings and reinforce the base
new t molding and marquee
24"LED
Modding a Xarcade tankstick with sanwa and happ comp buttons
running a pc with maxiums arcade and ps3
2.1 speakers and sub
led coin lights

That's all I can think of.

jayska01 · « **Reply #2 on:** September 25, 2011, 01:42:06 pm »

WEEK ONE TARE DOWN!!!!

IT seems it used to be old SF3 cab

it looks like it was being using as 1943 ( any cool vertical game like that haha) the CP still has the 6 button layout under the bondo

jayska01 · « **Reply #3 on:** September 25, 2011, 01:47:12 pm »

WEEK 3 REPAIR AND PAINT

I bluid i nice strong holder out of 3/4 mdf so i can remove the tankstick and also the keyboard and mouse underneath.

Remove the old racing pendel, repair the bottom corners, reinforced the bottom and added 2" casters. ( best decision so far) and gave it 3 layers of Gloss paint with
foam roller very happy with the result so far

jayska01 · « **Reply #4 on:** September 25, 2011, 01:55:37 pm »

WEEK 4 GETTING CLOSE!!!!!

I grabbed the tankstick for 100 bucks on kijiji it came with both pc and ps3 attachments so i couldnt say no

But the buttons are ---steaming pile of meadow muffin---!!!! so grabbed two sanwa JLF's with 12 happ comp buttons. i like the concaved style because it reminds of my youth haha now that its done time to move on!!!!

With all the buttons swapped out tankstick is done. i bought small 14" light at homedepot for marquee my bright red t molding came in from tmolding.com (where else

. Bought myself a 24" LED ASUS monitor, it has dvi hdmi and vga. so im set for everything i need

mounted to 1 X 6 plywood. braced with 3/4 mdf. Its not going anywhere

jayska01 · « **Reply #5 on:** September 25, 2011, 01:59:20 pm »

WEEK 5 FIGHT!!!

i got marquee made and wire up some 2.1 speaker with 5" sub (it sounds evil i love it) hooked up my pc and ps3. running like a dream. all i need is the Bezel for the finsh

probley going to put some SF4AE CP controlls seeing how its the game of choice!!!!

Martijn · « **Reply #6 on:** September 25, 2011, 03:23:05 pm »

How will you switch from pc to ps3 wiithout opening the cabinet?

jayska01 · « **Reply #7 on:** September 25, 2011, 07:31:09 pm »

http://www.monoprice.com/products/product.asp?c_id=101&cp_id=10110&cs_id=1011001&p_id=8202&seq=1&format=1#largeimage

this is what i bought

for the pc i use a DVI to HDMI cable

BTW Martijn your one of the main reasons i am bluiding this

add me to PS3 if u feel like losing

Martijn · « **Reply #8 on:** September 26, 2011, 03:42:40 am »

Would be cooler if you had 1 switch that would switch everything : controls, sound, video in one turn.

I dont have a ps3 in my cabinet, i went for a 360

jayska01 · « **Reply #9 on:** September 26, 2011, 11:04:16 am »

That's was the best idea at the time how are you switching

Martijn · « **Reply #10 on:** September 26, 2011, 11:09:22 am »

I am not switching, its dedicated to xbox 360. Its a jtagged console, meaning it runs emulators and mame with that and xbox360 games

jayska01 · « **Reply #11 on:** September 26, 2011, 06:26:25 pm »

The video switch it all I need the audio cable is shared, and the monitor will always be hdmi feed. Sowith a click of my remote I can simply switch between pc or ps3 no opening needed

TopJimmyCooks · « **Reply #12 on:** September 26, 2011, 07:23:10 pm »

Dude, someone stole the paint off your low rider!

jayska01 · « **Reply #13 on:** September 26, 2011, 10:35:43 pm »

Paint is over rated

all i need is clear coat!!!

Martijn · « **Reply #14 on:** September 27, 2011, 05:50:21 am »

And how will you switch with controls?

jayska01 · « **Reply #15 on:** September 27, 2011, 05:26:34 pm »

the xarcade psb connects using rs323 serial cable so i grabbed and spillter

http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10404&cs_id=1040403&p_id=4640&seq=1&format=2

jayska01 · « **Reply #16 on:** September 28, 2011, 10:51:10 pm »

Go the bezel done and maxiums arcade up and ruunning

. Not 100% finish so many alittle details to run threw

DCsegaDH · « **Reply #17 on:** September 28, 2011, 11:17:25 pm »

Two of my favorite things: mini trucks (first picture) and arcade machines

jayska01 · « **Reply #18 on:** September 29, 2011, 12:01:43 pm »

Yeah a fellow minitrucker what are odds

DCsegaDH · « **Reply #19 on:** September 29, 2011, 12:18:41 pm »

Quote from: jayska01 on September 29, 2011, 12:01:43 pm

Yeah a fellow minitrucker what are odds

Actually I own a air bagged wagon, does that count? But I'm a big fan of mini trucks, maybe I'll get one in the future.

jayska01 · « **Reply #20 on:** September 29, 2011, 03:40:03 pm »

sweet bagged wagon ? Let's see some pics wagon and arcade machine

DCsegaDH · « **Reply #21 on:** September 29, 2011, 03:45:53 pm »

delete, sorry about that.

DCsegaDH · « **Reply #22 on:** September 29, 2011, 03:49:22 pm »

http://imageshack.us/photo/my-images/269/baggedwagon.jpg/

As for the arcade machine, I don't any pictures of it since it's on my old computer, but I'll make one later when I save up the money.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
				Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news