Author Topic: Export VS Domestic (Read 1847 times)

smartbomb2084 · « **on:** September 24, 2011, 09:13:04 pm »

Riddle me this PinBatman...

Other than the obvious 230 Volt/50 Hertz operation VS 120 Volt/60 hertz operation and the WMS 3 slot coindoor, what are the differences between a WMS or STERN game made for export or one made for domestic use?

I know STERN made UK specific games with cabinet mounted buttons to control Posts on the Left and Right side drains as well as the middle.

Beyond that what else have you got for me?

Just the facts Ma'am... speculation need not apply.

Jeff AMN · « **Reply #1 on:** September 24, 2011, 11:53:11 pm »

Certain games might have some minor differences, but aside from some software tweaks most games are identical. Lots of re-imports have been converted back to proper voltages and had the coin doors swapped and it's pretty much impossible to know.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Export VS Domestic (Read 1847 times)

smartbomb2084

Export VS Domestic

Jeff AMN

Re: Export VS Domestic