Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: FS:Out of Stock. ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]  (Read 83644 times)

0 Members and 1 Guest are viewing this topic.

fluentd

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 72
  • Last login:October 20, 2014, 07:30:41 pm
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #160 on: September 06, 2012, 08:57:12 pm »
Hey is it possible to create a 4 player Mame setup with these boards?

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6417
  • Last login:March 21, 2024, 08:20:28 am
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #161 on: September 07, 2012, 12:06:15 am »
Yes, you can. You can have multiple of these in at the same time. I have personally used 4 of these at a time with no problems. If you are not using too many buttons for player 3 and 4, you might even be able to squeeze it all in with 3 encoders.

The only pitfall you could run into is that if you unplug and plug these back in while playing, it can change around the order of the players, which happens with most USB joystick devices. Under normal cabinet use, you would be leaving them plugged in all the time have no problems.

I just wanted to point it out since I have had a person use these for 2 player cabinets, with plug in and out add on controls for players 3 and 4. He was popping in and out during use, and the USB orders screwed up when doing so. It took tweaking to get the right encoders aligned with the right USB ID#'s so that he plug in player 3 and 4 without it affecting the order of player 1 and 2.

blackjudas

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:September 20, 2012, 08:30:22 pm
  • Rockin' it out in Canuckistan!
    • My Blog
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #162 on: September 13, 2012, 06:25:20 pm »
Seems like I can't PM either, I'd be interested in finding out if there's a flat rate for shipping to Canada or is it smarter for me just to use your ebay listing?
I type this out every time....

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6417
  • Last login:March 21, 2024, 08:20:28 am
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #163 on: September 13, 2012, 07:40:29 pm »
Hello,

I give international shipping at cost here. It should generally be cheaper through here directly than through ebay. I will PM you with a quote.

FYI, I only have one left in inventory until my next shipment comes in about a week from now. If you want more than one, it will take a little longer. Thanks!

blackjudas

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:September 20, 2012, 08:30:22 pm
  • Rockin' it out in Canuckistan!
    • My Blog
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #164 on: September 13, 2012, 11:18:50 pm »
Hello,

I give international shipping at cost here. It should generally be cheaper through here directly than through ebay. I will PM you with a quote.

FYI, I only have one left in inventory until my next shipment comes in about a week from now. If you want more than one, it will take a little longer. Thanks!

Hi Vigo,

Thanks for the PM, seems I can't even respond to one, understandable anti-spam measures.  Well you've got me convinced, I'll take two, let me know through a PM when you have your next shipment as I'm in no magic rush.  For two, is the price different or simply multiply the amount by 2?

Thanks!
I type this out every time....

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6417
  • Last login:March 21, 2024, 08:20:28 am
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #165 on: September 14, 2012, 01:04:35 am »
It will be a little bit cheaper for each since I can combine the shipping for the two. I sent you a second PM with your new quote. Thanks!

sq1ne

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:October 24, 2012, 07:28:09 pm
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #166 on: October 03, 2012, 05:31:43 pm »
Hi there,
How many of these boards would I need if I were to do a set up for 2 player, street fighter style?

(2) 8 way joysticks
(2) push buttons

player 1, player 2 coins
restart, select

Anything else I've missed?

Thanks,

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6417
  • Last login:March 21, 2024, 08:20:28 am
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #167 on: October 04, 2012, 09:30:22 am »
Hi Sq1ne,

These boards come standard with enough wires for the joystick and 8 buttons, with the option of buying 4 more button wires ($3 extra).

With your setup, it sounds like you would want 9-10 buttons for each player. You would want to order 2 encoder boards, and one extra wire set.

Let me know if you are interested and I will send you a PM with the payment instructions.

Thanks!
Vigo

sq1ne

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:October 24, 2012, 07:28:09 pm
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #168 on: October 04, 2012, 06:01:21 pm »
Yes,
Please send me a PM with instructions for payment.
Thanks,

manurag

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:October 22, 2012, 01:06:47 pm
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #169 on: October 07, 2012, 12:47:30 pm »
Want to buy ZD encoder . Can it be shipped to india .If yes,Can u please send me the quote including the shipping charges at anurag.makol@gmail.com

I will be thankful.


Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6417
  • Last login:March 21, 2024, 08:20:28 am
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #170 on: October 07, 2012, 03:05:37 pm »
Want to buy ZD encoder . Can it be shipped to india .If yes,Can u please send me the quote including the shipping charges at anurag.makol@gmail.com

I will be thankful.
Email replied. Thanks!

virtvic

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:September 22, 2013, 06:54:07 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #171 on: October 07, 2012, 06:53:09 pm »
Hi there, Vigo - I'd be interested in buying a pcb, can you pm me please as I can not message you for some reason (because I am new to this forum?)

cheers

V

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6417
  • Last login:March 21, 2024, 08:20:28 am
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #172 on: October 07, 2012, 07:09:54 pm »
Hi there, Vigo - I'd be interested in buying a pcb, can you pm me please as I can not message you for some reason (because I am new to this forum?)

cheers

V

PM replied. Thanks!

DAWORM

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:October 12, 2012, 05:11:31 pm
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #173 on: October 12, 2012, 04:30:26 pm »
After 1 year of researching and wishing ~ Its time to get off the pot and build me a stick.   Vigo I would like to buy a ZD Rematch ~ Im using Happ Buttons and a Zippyy Joystick (so the American size wires should work)

Please send me a message ~ Time to start building !!!

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6417
  • Last login:March 21, 2024, 08:20:28 am
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #174 on: October 12, 2012, 04:32:34 pm »
After 1 year of researching and wishing ~ Its time to get off the pot and build me a stick.   Vigo I would like to buy a ZD Rematch ~ Im using Happ Buttons and a Zippyy Joystick (so the American size wires should work)

Please send me a message ~ Time to start building !!!
PM replied. Thanks!

RyoriNoTetsujin

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 545
  • Last login:March 23, 2024, 03:55:45 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #175 on: October 15, 2012, 09:53:16 am »
PM sent.  ;D

RyoriNoTetsujin

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 545
  • Last login:March 23, 2024, 03:55:45 pm
Received my 2 boards yesterday. :w00t Installed last night, cleaned up the cables a bit this morning.

They're replacing an iPac4 (with a PS3 adapter that still isn't working the way I need it to, despite Andy's best efforts to repair it ... ???) and they're doing a great job on both PC and PS3. Thanks Vigo!

Now, that said:
Hi guys, I bought one of these from ebay a few weeks back after reading the original thread on their discovery - it turned up yesterday.
I finally got around to having a play with it today, and wondered if anyone had had any luck changing the config settings. Namely the default hat/pivot selection on startup.
Currently the Red LED is default, but would like it to boot straight to the green LED to avoid having to run another (Mode) switch if possible.

I have had a look through the properties section in the device manager, and I imagine its just a 0 value that needs changing to 1 somewhere, but lack of info on these boards is making it tough.


Thanks in advance

Any information on this? PS3 only recognizes the POV hat as a D-pad for fighting games (SF4, TTT2, etc.). I've got a couple of spare buttons rigged up and hanging out the back of my CP for now, but a permanent boot solution would be really, really ideal.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6417
  • Last login:March 21, 2024, 08:20:28 am
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #177 on: October 23, 2012, 11:13:15 pm »
Awesome! I'm glad it's working out for you! In regards to booting in POV hat mode, I will check in with the guy who makes it. It will be a few days before I get the chance to ask him, but I'm hoping he has an answer.  8)

esmith13

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:April 07, 2022, 09:27:26 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #178 on: October 25, 2012, 02:44:57 pm »
Hi Vigo,

New user here and like everyone else I can't PM.
I would like to order one of these with wires for all 12 buttons ( not just 8 ) if it doesn't bring the total  to over $20.00

Thanks in advance,


Eric
« Last Edit: October 25, 2012, 02:48:46 pm by esmith13 »

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6417
  • Last login:March 21, 2024, 08:20:28 am
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #179 on: October 25, 2012, 04:45:05 pm »
Hi Vigo,

New user here and like everyone else I can't PM.
I would like to order one of these with wires for all 12 buttons ( not just 8 ) if it doesn't bring the total  to over $20.00

Thanks in advance,


Eric

Not a problem. PM replied. If you're not USA, please let me know so I can give you a shipping quote. Thanks!

esmith13

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:April 07, 2022, 09:27:26 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #180 on: October 25, 2012, 06:27:21 pm »
Payment Sent!! Thank you, sir!!


Eric

burncycle

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:December 31, 2013, 11:52:49 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #181 on: November 01, 2012, 12:50:00 pm »
Hey,
I am also new to this also. I was looking to get one of your boards instead of a I-pac. I want to set up a 4 player mame. can you send me a PM also I'm in MN also could I possibly pick up ?

thanks in advance 

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6417
  • Last login:March 21, 2024, 08:20:28 am
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #182 on: November 01, 2012, 01:10:19 pm »
Hey,
I am also new to this also. I was looking to get one of your boards instead of a I-pac. I want to set up a 4 player mame. can you send me a PM also I'm in MN also could I possibly pick up ?

thanks in advance

PM replied! Thanks!

burncycle

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:December 31, 2013, 11:52:49 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #183 on: November 01, 2012, 01:43:29 pm »
Got your PM but I can not reply to it yet. question? can you run two encoders to have 4 players ??

phearly

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • Last login:November 14, 2012, 12:55:00 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #184 on: November 02, 2012, 01:08:21 am »
Hi,
    I am wanting to build a 2-player Hyperspin cabinet setup(2 sticks, 6 action buttons each & a few other buttons) and would like to purchase 1 or two of your boards. I can't seem to PM you to set it up(maybe because I am new to the forum???). I am looking to get started building ASAP. Thanks

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6417
  • Last login:March 21, 2024, 08:20:28 am
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #185 on: November 02, 2012, 12:34:56 pm »
Hi,
    I am wanting to build a 2-player Hyperspin cabinet setup(2 sticks, 6 action buttons each & a few other buttons) and would like to purchase 1 or two of your boards. I can't seem to PM you to set it up(maybe because I am new to the forum???). I am looking to get started building ASAP. Thanks

PM replied. Thanks!

jpS14

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 40
  • Last login:October 04, 2022, 04:34:26 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #186 on: November 07, 2012, 02:48:59 pm »
Got my ZD encoder a few days ago. Works great and shipping was super fast! Thanks Vigo   :applaud:

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6417
  • Last login:March 21, 2024, 08:20:28 am
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #187 on: November 07, 2012, 03:56:11 pm »
Great! I'm glad you got it so quickly. Let me know if any questions come up!

ace_1989

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:November 26, 2012, 12:20:37 pm
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #188 on: November 07, 2012, 06:39:07 pm »
HI! I want to order this encoder of yours but i am in Philippines..

How much would it cost if shipping cost  is included?
Is this for 1player only? 
Can i connect coin slot on this board

My setup: 2-player
6 action buttons for each player
2 sticks

« Last Edit: November 07, 2012, 06:45:05 pm by ace_1989 »

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13999
  • Last login:Yesterday at 10:20:30 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #189 on: November 07, 2012, 09:10:08 pm »
Vigo, my man I'm assuming you still have these in stock, I might need a few, will these work with perfect 360 sticks? They require a common ground so I'm assuming I can tie all the top (or bottom) wires together and be good to go?
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6417
  • Last login:March 21, 2024, 08:20:28 am
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #190 on: November 08, 2012, 12:48:13 pm »
HI! I want to order this encoder of yours but i am in Philippines..

How much would it cost if shipping cost  is included?
Is this for 1player only? 
Can i connect coin slot on this board

My setup: 2-player
6 action buttons for each player
2 sticks
PM replied. Thanks!

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6417
  • Last login:March 21, 2024, 08:20:28 am
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #191 on: November 08, 2012, 01:06:08 pm »
Vigo, my man I'm assuming you still have these in stock, I might need a few, will these work with perfect 360 sticks? They require a common ground so I'm assuming I can tie all the top (or bottom) wires together and be good to go?

Hey Malenko! Yep, I got these in stock. To be honest, I have never wired a perfect 360 to it. I looked it over and think it should work. The directional inputs are all be common ground. The sanwa joystick port on there is common ground as well. I don't see it as being an issue, but I just never tried.

DracoDan

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13
  • Last login:February 27, 2019, 09:55:31 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #192 on: November 16, 2012, 05:29:09 pm »
After looking through all the different choices out there, I've made the easy decision to go with a pair of these for my arcade cabinet.  Like so many others, I'm new here so I can't send PMs.  Shoot me a PM or email me @gmail.com

Thanks!

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6417
  • Last login:March 21, 2024, 08:20:28 am
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #193 on: November 17, 2012, 01:16:58 am »
After looking through all the different choices out there, I've made the easy decision to go with a pair of these for my arcade cabinet.  Like so many others, I'm new here so I can't send PMs.  Shoot me a PM or email me @gmail.com

Thanks!

PM replied. Thanks!

adder

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 640
  • Last login:February 04, 2021, 10:51:51 am
  • Location: Easy St.
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #194 on: November 21, 2012, 08:35:06 pm »

VIGO,  pm sent..  i think.... (the message is not in my sent items folder.. anyway let me know if you get my pm, thanks :lol)

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7906
  • Last login:March 19, 2024, 06:19:27 pm
Aww crap. I need 4 of these. I'll keep checking for when you come back online, but if anybody has one or two they'd like to sell shoot me a PM.

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7906
  • Last login:March 19, 2024, 06:19:27 pm
We in stock yet? Also, can someone point me to connectors that work with Cherry switches?

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13999
  • Last login:Yesterday at 10:20:30 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
We in stock yet? Also, can someone point me to connectors that work with Cherry switches?

it IS February in Australia.
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

toopack2

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:February 28, 2013, 10:57:36 pm
  • I want to build my own arcade controls!
I am new to gaming and a member recommended me to get this encoder board from you for my joystick.  I do not know much so it might sound silly to some, is this board like a converting board that I see in some joystick kit that you allow you to plug in computer's USB port?  Can I do the JAMMA harness with this board?  Too much to learn.
Thank you

AjunNg

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:February 07, 2013, 08:54:49 pm
  • I want to build my own arcade controls!
Looking to buy one of these. Would want the normal or the Rematch, whichever is first available.
If Vigo could PM me the cost to London United Kingdom, it would be great!
Not enough posts to send PMs yet.