Author Topic: FS:Out of Stock. ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN] (Read 84343 times)

codeena · « **Reply #120 on:** June 05, 2012, 12:59:34 pm »

PM Sent, thank you

IG-88 · « **Reply #121 on:** June 05, 2012, 10:51:00 pm »

Quote from: Vigo on May 31, 2012, 12:14:52 pm

Oop! Sorry, I somehow had it in my mind that I responded to you. I must be going senile.

You can remap the exit button in Mame with a press of a button or a combination of buttons. Just while in game, hit tab on the keyboard, goto the "Input (general)" option, then "User Interface" then you should see the quit is mapped to the esc button. (I think they call quit "UI Cancel"). You can remap this to be whatever button you want from the encoder. If you push more than one at once, it will know to quit only when you push both buttons. I have mine set to quit when I push both "Coin" and "start" at the same time.

Cool thanks! Found it. Now, how do I get Mame to remember what I set the esc button too? Every time I exit out of the program and go back in its "re-mapped" to the default of the "esc" button again.

Vigo · « **Reply #122 on:** June 06, 2012, 03:13:21 pm »

That's strange. Is your mame.ini file set as 'read only'? That's the only thing that I can think of.

IG-88 · « **Reply #123 on:** June 06, 2012, 03:50:10 pm »

I probably should move this over to the software forum. I don't have a mame.ini file. I got a MAME32.ini and a MAME32ui.ini Both of which are not set to "read only" I have a sinking feeling its something to do with WIN 7 that I am running on this machine. I have been reading some bad stories on how 7 likes to screw with these and other system type files....

JdotFite · « **Reply #124 on:** June 29, 2012, 12:15:02 am »

Vigo, can you PM with payment instructions please! I will be taking one off your hands.

Thanks,
Justin

Vigo · « **Reply #125 on:** June 29, 2012, 12:44:47 pm »

Quote from: JdotFite on June 29, 2012, 12:15:02 am

Vigo, can you PM with payment instructions please! I will be taking one off your hands.

Thanks,
Justin

PM replied! Thanks!

noidea · « **Reply #126 on:** July 10, 2012, 06:33:58 am »

Hey, i am also interested in one of these, could you send me a message on how much the (cheapest) shipping to germany would cost?

thanks in advance.

Vigo · « **Reply #127 on:** July 10, 2012, 12:47:27 pm »

Quote from: noidea on July 10, 2012, 06:33:58 am

Hey, i am also interested in one of these, could you send me a message on how much the (cheapest) shipping to germany would cost?

thanks in advance.

PM replied. Thanks!

gonzojoey · « **Reply #128 on:** July 18, 2012, 09:55:01 pm »

PM Sent.
thanks!

Vigo · « **Reply #129 on:** July 18, 2012, 10:31:39 pm »

I'm on it!

Brian74 · « **Reply #130 on:** July 24, 2012, 10:07:58 am »

Hey Vigo, do you have a encoder that can be used with the ps3 and the 360?

gtxjoe · « **Reply #131 on:** July 24, 2012, 05:36:22 pm »

Please PM me with purchase information. I haven't been on the forum in ages so I had to create a new account and I can't PM yet.

thanks,
Joe

Vigo · « **Reply #132 on:** July 25, 2012, 01:11:44 pm »

Quote from: Brian74 on July 24, 2012, 10:07:58 am

Hey Vigo, do you have a encoder that can be used with the ps3 and the 360?

Nothing right now. The guy I work with who produces these boards does currently do some 360 stuff, but nothing I will sell. They are not super cost effective, and Haruman does a good job with gamepad hacks. I have pressed him for a combo PC / PS3 / 360 board though, and he might be making something down the road. Nothing in the immediate future though.

HaRuMaN · « **Reply #133 on:** July 25, 2012, 01:23:14 pm »

Quote from: Vigo on July 25, 2012, 01:11:44 pm

Haruman does a good job with gamepad hacks.

Why, thank you!

Greener · « **Reply #134 on:** July 28, 2012, 06:30:58 pm »

I would like to purchase a ZD Encoder board with 4 joystick wires and 12 button wires, but I am not able to PM. Can you please PM me the purchase info? Thanks.

Vigo · « **Reply #135 on:** July 28, 2012, 11:54:25 pm »

Quote from: Greener on July 28, 2012, 06:30:58 pm

I would like to purchase a ZD Encoder board with 4 joystick wires and 12 button wires, but I am not able to PM. Can you please PM me the purchase info? Thanks.

PM replied! Thanks!

Moo · « **Reply #136 on:** July 31, 2012, 01:06:45 pm »

Hi Vigo,

I'm interested in a ZD board or 2 but can't PM yet. I'm planning 2 fight sticks with japanese sticks and buttons, PC only and not sure if I should go with the ReMatch or not.

Thanks

Vigo · « **Reply #137 on:** July 31, 2012, 03:41:38 pm »

Hello Moo,

If you are going with PC only, you can probably just use the regular ZD encoder instead of the ReMatch. Save some money there. I am guessing since you are looking to build fight sticks, you would want to order the extra button wires though, so that you can have 12 buttons instead of 8. However, the ReMatch does have a longer USB cable, in case that is important to you.

I can also swap in .110 wires for the Regular ZD encoder for Japanese buttons, as well as the 5-pin harness if that is the type of joystick you are using.

If you are interesting or have questions let me know. I can sent you a PM so you can reply to me directly.

jigz · « **Reply #138 on:** August 03, 2012, 04:32:37 pm »

Looks like my account is to new to PM you - if you could shoot me the info for one with all 12 wires that would be great. I plan on using a JLF as well as Japanese buttons if that makes a difference in connector ends.

Thanks!

Vigo · « **Reply #139 on:** August 06, 2012, 12:59:49 am »

Quote from: jigz on August 03, 2012, 04:32:37 pm

Looks like my account is to new to PM you - if you could shoot me the info for one with all 12 wires that would be great. I plan on using a JLF as well as Japanese buttons if that makes a difference in connector ends.

Thanks!

PM Replied. You can reply directly to my PM or just reply on this thread. Thanks.

m3nk111a · « **Reply #140 on:** August 12, 2012, 12:29:35 am »

Hey Vigo replay me! im too new to PM you, but i want a ZD Rematch with 12 wires and .110 connectors.

Vigo · « **Reply #141 on:** August 13, 2012, 03:23:48 pm »

Quote from: m3nk111a on August 12, 2012, 12:29:35 am

Hey Vigo replay me! im too new to PM you, but i want a ZD Rematch with 12 wires and .110 connectors.

PM Replied.

coorslight · « **Reply #142 on:** August 15, 2012, 06:25:03 pm »

PM sent Thanks!

P.H.U. · « **Reply #143 on:** August 16, 2012, 05:18:51 pm »

Hi Vigo;

3 Things.

First, got the encoder boards in 4 days! Thanks!
Secondly, where do I go to add to your seller rep?

and lastly......

Here is the tricky thing, I am powering a Happ P360 stick which require 5 volts. I was wondering of the ZD Remate has connector pins for that? I am hoping I don' t have to draw it from a separate USB slot but will do it if I have to. Thanks!

Vigo · « **Reply #144 on:** August 18, 2012, 06:26:00 pm »

Hey P.H.U.

Thanks! I'm glad you got them quickly. Sorry my reply is a slow though.

I think seller rep is temporarily out of commission while the forum is being updated. I am think it will come back but I am not sure when. I think normally it is just clicking the rep number by the persons name and then clicking a link that says add seller rep.

For the 5 volts on the P360, I think the ZD Rematch can be used but I honestly don't know the current draw from it. I am guessing the 360 would not draw so much that the ZD would have trouble powering itself, but that would be a possibility. You can try the tapping into the two upper most unused soldering points on the left of the board. I believe they are the auxiliary 5v points. I think that would be the best spot to use.

Jellyman · « **Reply #145 on:** August 21, 2012, 02:00:54 am »

Please send me payment information for 2 ZD Encoders. Let me know if there are any special instructions for installing 2.

Vigo · « **Reply #146 on:** August 21, 2012, 02:31:29 pm »

Quote from: Jellyman on August 21, 2012, 02:00:54 am

Please send me payment information for 2 ZD Encoders. Let me know if there are any special instructions for installing 2.

PM replied. Thanks!

Jellyman · « **Reply #147 on:** August 21, 2012, 03:32:05 pm »

Vigo,
Thanks for the quick reply. Since I can't reply to your PM yet, can you resend the payment info for 2 encoders + (2)12 wiresets and I plan to use cc from paypal. I will cover the pp fees, so add that to the total too please.

Vigo · « **Reply #148 on:** August 21, 2012, 04:12:47 pm »

Quote from: Jellyman on August 21, 2012, 03:32:05 pm

Vigo,
Thanks for the quick reply. Since I can't reply to your PM yet, can you resend the payment info for 2 encoders + (2)12 wiresets and I plan to use cc from paypal. I will cover the pp fees, so add that to the total too please.

No problem. Replied.

Jellyman · « **Reply #149 on:** August 21, 2012, 04:20:53 pm »

Payment sent. Thanks Vigo!

Jellyman · « **Reply #150 on:** August 23, 2012, 12:29:35 pm »

Wow, that came quick.

Great packing job too. Thanks again!!! Now, I'm just waiting for GGG to send my parts.

[maxx] · « **Reply #151 on:** August 30, 2012, 03:55:07 pm »

Hi Vigo, sorry if I write here but I can't (or probably simply don't understand how) send you a PM.
I'm very interested in this item, I would like to know shipping costs to Italy. Thank you!

Vigo · « **Reply #152 on:** August 30, 2012, 04:23:17 pm »

Quote from: [maxx] on August 30, 2012, 03:55:07 pm

Hi Vigo, sorry if I write here but I can't (or probably simply don't understand how) send you a PM.
I'm very interested in this item, I would like to know shipping costs to Italy. Thank you!

PM replied. Thanks.

[maxx] · « **Reply #153 on:** August 31, 2012, 09:02:10 am »

you've got PM

jbaker · « **Reply #154 on:** September 02, 2012, 12:53:26 pm »

i would like one of your encoder boards but the site wont let me pm you it says im not allowed to go there maby i dont have enough post or somthing please pm me your paypal address for payment. thanks

Vigo · « **Reply #155 on:** September 02, 2012, 10:19:28 pm »

Quote from: jbaker on September 02, 2012, 12:53:26 pm

i would like one of your encoder boards but the site wont let me pm you it says im not allowed to go there maby i dont have enough post or somthing please pm me your paypal address for payment. thanks

PM replied. Thanks!

helioelias · « **Reply #156 on:** September 05, 2012, 11:40:49 pm »

Vigo How buy this, i can send the ZD ReMatch to Brazil ?

thks´s
Helio Elias

Vigo · « **Reply #157 on:** September 06, 2012, 12:32:55 am »

Quote from: helioelias on September 05, 2012, 11:40:49 pm

Vigo How buy this, i can send the ZD ReMatch to Brazil ?

thks´s
Helio Elias

PM replied. Thanks!

helioelias · « **Reply #158 on:** September 06, 2012, 06:58:35 am »

Vigo i cannot send PM ("An Error Has Occurred! You are not allowed to send personal messages."), I am new user, my e-mail is helioelias@gmail.com, i can send instructions to payment in my e-mail, please

I want the ZD Rematch

thks,
Helio Elias

Vigo · « **Reply #159 on:** September 06, 2012, 02:40:24 pm »

Quote from: helioelias on September 06, 2012, 06:58:35 am

Vigo i cannot send PM ("An Error Has Occurred! You are not allowed to send personal messages."), I am new user, my e-mail is helioelias@gmail.com, i can send instructions to payment in my e-mail, please

I want the ZD Rematch

thks,
Helio Elias

PM replied. Thanks!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news