Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: FS:Out of Stock. ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]  (Read 71396 times)

0 Members and 1 Guest are viewing this topic.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
UPDATE- MARCH 2013 - I am closing shop. Thank you for all your support.

I have an inventory Zero Delay Encoder Boards in stock. They are now improved. All the wires now have the wider .187 inch terminal connectors on the end for better versatility connecting to your arcade parts. The good news is that the price is still at a low 14.75 per board shipped in the US. International is simply the difference in shipping added to the price. Feel free to PM me for a price quote. :D

Now the board has always come with 4 wires for a joystick and 8 wires for buttons, but board is capable of taking up to 12 button wires, and some people have expressed interest in utilizing all wires. I am happy to announce that I now offer an option to purchase the board with 4 joystick wires and 12 button wires! The price for the board with the extra wires is $17.50 after shipping in the US. As with the 14.75 option, international price is only the cost difference in shipping added. PM me for a quote. - For those that have already made a purchase and want extra wires, I will happily send you the additional wires at $3.50 shipped for each set of 4 wires. domestic or international. Just let me know!


Here is the board:

Zero Delay Arcade Control Encoder



The Zero delay is the most cost effective encoder option available. It is plug and play, lag free and very compact. (8.5 cm X 3.5 cm X 1 cm)


The Zero Delay board comes with:

  • USB Cable
  • 4 Wire sets for joystick.
  • 8 Wire sets for 8 buttons, or 12 wire sets if you want to upgrade.
  • Instructions


The Zero Delay also has these additional features for those that wish to utilize them:

  • Hat switch for secondary joystick, POV controls, or console style gaming controls
  • Autofire option
  • Rapidfire option
  • 5 pin port for Japanese (Sanwa) ports




FAQ:

Q: What method does this board encode the controls?
A: Controls are encoded like a gamepad.

Q: How do I hook up the controls?
A: one end of the wire plugs right into the board port, the other end connectors into the joystick or button switch. The included instructions will let you know what each port maps to. The terminals will fit up to .187 size terminals, which is the most common size for arcade switches. If you have switches that take the larger .25 terminals, you can either soldier on the terminals or crimp on new connectors.

Q: Have these boards been inspected?
A: Each board was given QC initials. Also, I have personally plugged every board in my PC and determined that it registers correctly with the PC. I have also visually inspected all the wires and boards.

Q: How should payment be made?
A: I am set up for Paypal. If you are interested in purchasing, send me a PM.

Q: Is this compatible with PS3?
A: I have had a chance to try it out, yes, it worked great. It should be great for fighters! Just bear in mind that there is no Home button. If you need an encoder with a PS3 Home button, check out my ZD Rematch!

Q: Does it need special software?
A: It uses the standard joystick drivers on the computer, no software needed!


Thank you!!
Vigo
« Last Edit: March 19, 2013, 04:30:09 pm by Vigo »

seantk421

  • Trade Count: (+2)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
  • Last login:April 20, 2014, 11:24:54 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #1 on: September 22, 2011, 06:56:44 am »
Pm sent

jmike

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1017
  • Last login:April 26, 2022, 10:53:01 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #2 on: September 22, 2011, 07:07:43 am »
These look very familiar. Do you know if it's compatible with the PS3 and does it have "start" and "select"?


Thanks.

 :cheers:

Sjaak

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 705
  • Last login:Today at 07:54:06 am
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #3 on: September 22, 2011, 07:16:40 am »
PM sent

jmike

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1017
  • Last login:April 26, 2022, 10:53:01 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #4 on: September 22, 2011, 08:21:02 am »
PM sent

 :applaud:

sham69

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 149
  • Last login:June 12, 2015, 06:03:44 am
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #5 on: September 22, 2011, 08:24:33 am »
Can these be programmed for mame default?
Is there mapping software etc?
Thanks.
Sham.

t3design

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 219
  • Last login:November 04, 2017, 12:37:56 am
  • Orange Power! Go Pokes!
    • Cowboy Arcade Project
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #6 on: September 22, 2011, 09:11:28 am »
I may be asking the same question as directly above...

Getting ready to build a cabinet for a friend on the cheap. Will these work in MAME on a standard PC?
Cowboy Arcade Project ThreadCowboy Arcade Project Website
If you are an obsessive/compulsive pyromaniac, you better make sure you wear flame retardant pajamas.

jmike

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1017
  • Last login:April 26, 2022, 10:53:01 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #7 on: September 22, 2011, 09:43:10 am »
Thanks PBJ
              I've been trying to find that thread all morning.






yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19877
  • Last login:Today at 06:29:30 pm
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #8 on: September 22, 2011, 10:24:28 am »
Does anyone know what type of connector that is on the board end of the wires (the white one)? Does it have a specific name?
***Build what you dig, bro. Build what you dig.***

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #9 on: September 22, 2011, 10:36:56 am »
Sorry, its a crazy busy morning for me. I will reply to pm's soon.  :)



These look very familiar. Do you know if it's compatible with the PS3 and does it have "start" and "select"?

There are button slots for select and start. It comes with enough buttons to cover a standard "dual shock" style controller. While the board can be wired up for up to 12 buttons, it only comes with enough wires to cover 8 buttons. Unfortunately, that's how they just come. You can solder for the the remaining slots, but like yotsuya I am also trying to find out what kind of connector is being used. If anyone knows, it would be greatly appreciated.

Also, I have not tried on the PS3. I have a PS3, so I will try hooking it up tonight. I will post my results.  :cheers:


Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #10 on: September 22, 2011, 10:52:10 am »
PBJ gets a star! That looks to be the connector.

Here is the first website I checked:

http://www.pololu.com/catalog/product/1164

$0.75 per cable. I will check into ordering a batch as well.





Donkbaca

  • Our reptillian overlords would be pleased
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2648
  • Last login:May 09, 2012, 06:28:10 pm
    • Slim built MAME/Xbox cab
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #11 on: September 22, 2011, 12:08:42 pm »
Seems to me you could use one of these to make a 2 player classic cab:

P1 - joy
p2 - POV hat

3 buttons per
1 start per
1 coin per

plus an exit button - that's all the inputs and 11 buttons...

Donkbaca

  • Our reptillian overlords would be pleased
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2648
  • Last login:May 09, 2012, 06:28:10 pm
    • Slim built MAME/Xbox cab
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #12 on: September 22, 2011, 12:24:28 pm »
Well, you could do a 2player, 3 button panel?

1pjoy - joy
2pjoy - 4 buttons
3 buttons per player
2 coin
2 start
1 exit

Wouldn't that work?

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19877
  • Last login:Today at 06:29:30 pm
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #13 on: September 22, 2011, 12:31:50 pm »
Does anyone know what type of connector that is on the board end of the wires (the white one)? Does it have a specific name?

Pretty sure they're JST XH 2-pin connectors.  They're used on battery packs.

 :cheers:

James rocks!  :cheers:
***Build what you dig, bro. Build what you dig.***

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #14 on: September 22, 2011, 01:45:11 pm »
Well, you could do a 2player, 3 button panel?

1pjoy - joy
2pjoy - 4 buttons
3 buttons per player
2 coin
2 start
1 exit

Wouldn't that work?

If you are wiring the POV Hat mode as a shift function button, then I think you could do that.

Without the hat switch it would be 3 buttons short. (4 buttons for 2nd joy, 6 for game buttons, 4 for select and start buttons and 1 exit button needed)

If I were doing it, I would give P2 the dedicated joystick, then give P1 a real coin and start button. Player two would just need to hit the hat switch and press left on the joystick for coin and right for start. Then you could make hat switch and up as the game exit.


Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #15 on: September 23, 2011, 01:24:24 pm »

Also, I have not tried on the PS3. I have a PS3, so I will try hooking it up tonight. I will post my results.  :cheers:



I know I promised to try this on a PS3 last night, sorry I haven't had a chance to try it out yet. I will make time tonight.  8)

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10315
  • Last login:June 23, 2022, 07:02:21 pm
  • boom
    • Arcade Madness
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #16 on: September 23, 2011, 01:27:34 pm »
You can send one to me, I'll test it on a PS3...   >:D

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #17 on: September 23, 2011, 02:27:35 pm »
For $14.75, I'd be happy to.  ;D

PCMedics

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 58
  • Last login:September 22, 2013, 12:28:12 am
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #18 on: September 23, 2011, 11:23:36 pm »
Great seller replied fast, set up payment simply with paypal . Looking forward to trying out a couple.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #19 on: September 24, 2011, 12:33:49 am »
Thanks, PCMedics! I will have your order in the mail tomorrow as well!  :)

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #20 on: September 24, 2011, 12:38:38 am »

Also, I have not tried on the PS3. I have a PS3, so I will try hooking it up tonight. I will post my results.  :cheers:



I know I promised to try this on a PS3 last night, sorry I haven't had a chance to try it out yet. I will make time tonight.  8)

OK, good news! I have tried this out with my PS3, and it worked great!  :woot

I was finally kicking butt in Tekken tonight! Maybe I will make myself a PS3 CP with one of these.
« Last Edit: September 24, 2011, 01:40:12 am by Vigo »

Donkey_Kong

  • heh. I dont know what it stands for but I'm immature and thats hilarious.
  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1693
  • Last login:October 20, 2019, 12:39:54 am
    • CNC Machines
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #21 on: September 24, 2011, 01:27:21 pm »
Payment sent. Thanks Vigo!
Carved Signs, Custom Gameroom Signs, and Arcade Game Decor and now CNC MACHINES by Melissa Jones

Nephasth

  • Guest
  • Trade Count: (0)
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #22 on: September 24, 2011, 04:59:33 pm »
Got mine today. Ordered late Wednesday night. Very fast! Thanks Vigo! :applaud:

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #23 on: September 25, 2011, 05:40:21 am »
Thanks, Nephasth! Let me know if any questions come up about the boards!  :cheers:

SNAAKE

  • Trade Count: (+29)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3504
  • Last login:Yesterday at 03:31:27 pm
  • my joystick is bigger than your joystick !
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #24 on: September 25, 2011, 08:54:35 am »
anybody know if this works with it?? I need one of your encoder(maybe more after I have the 1st one) either way. just wondering.

http://www.ebay.com/itm/Computer-PC-USB-XBOX-Adapter-Cable-FEMALE-NEW-/200583224220?pt=Video_Games_Accessories&hash=item2eb3b11b9c

jmike

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1017
  • Last login:April 26, 2022, 10:53:01 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #25 on: September 26, 2011, 11:15:19 am »

Also, I have not tried on the PS3. I have a PS3, so I will try hooking it up tonight. I will post my results.  :cheers:



I know I promised to try this on a PS3 last night, sorry I haven't had a chance to try it out yet. I will make time tonight.  8)

OK, good news! I have tried this out with my PS3, and it worked great!  :woot

I was finally kicking butt in Tekken tonight! Maybe I will make myself a PS3 CP with one of these.

Awesome. PM sent.

jggamer

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13
  • Last login:February 16, 2012, 08:40:25 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #26 on: September 27, 2011, 01:04:12 am »
PM Sent.. ;D

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19877
  • Last login:Today at 06:29:30 pm
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #27 on: September 27, 2011, 03:19:04 am »
Mine showed up today, Vigo! Nicely packed, with instructions, and about 18 days quicker than it was getting them from Hong King! thanks!

 :cheers:
***Build what you dig, bro. Build what you dig.***

PCMedics

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 58
  • Last login:September 22, 2013, 12:28:12 am
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #28 on: September 27, 2011, 01:37:30 pm »
I received mine today expertly packaged and arrive quickly. Thanks Vigo

Sjaak

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 705
  • Last login:Today at 07:54:06 am
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #29 on: September 27, 2011, 02:16:11 pm »
I live in the Netherlands (that's in Europe ;) ) Payment 9/22, received 9/27.

Vigo, you should get an award for packaging!

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #30 on: September 27, 2011, 04:34:38 pm »
Wonderful! Thanks, guys! I'm really glad you got your orders quickly!  :cheers:


Oh, FYI - 10 left.  :afro:

jmike

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1017
  • Last login:April 26, 2022, 10:53:01 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #31 on: September 27, 2011, 05:37:10 pm »
10 left  :cry:
Would you be ordering more? I just placed my order so I haven't had time to use one for a PS3 fight stick.

 :cheers:

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #32 on: September 28, 2011, 12:26:55 pm »
I am considering buying more. I am looking to see how the rest of this batch sells, and what kind of feedback I get on the encoder first.

I am also looking into other products that would interest people if I could get them cheaper from overseas. Suggestions would be welcome. I already looked into finding a cheaper spinner from overseas, but after talking to some arcade enthusiasts in China, I have come to the conclusion that they rarely use them or make them to begin with.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19877
  • Last login:Today at 06:29:30 pm
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #33 on: September 28, 2011, 12:51:29 pm »
See if you can talk them into making a 25 inch 4:3 LCD. :)
***Build what you dig, bro. Build what you dig.***

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19877
  • Last login:Today at 06:29:30 pm
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #34 on: September 28, 2011, 01:24:00 pm »
Buy some of the spinners anyway.  I'm getting sick of my mouse hack.

What's the issue?
***Build what you dig, bro. Build what you dig.***

seantk421

  • Trade Count: (+2)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
  • Last login:April 20, 2014, 11:24:54 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #35 on: September 28, 2011, 09:49:19 pm »
Got mine in the mail today.  Shipping was fast and packaging is perfect.  Thanks Vigo!  The board looks nice from what I can tell.  It does turn out that it doesn't work with the x-arcade switches so I'll need to go get the other connectors.  Does anyone know what type of connectors they use?

Thanks!

seantk421

  • Trade Count: (+2)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
  • Last login:April 20, 2014, 11:24:54 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #36 on: September 28, 2011, 10:51:34 pm »
Just gave soldering the connectors a try and it worked like a charm.  Thanks!  Vigo, do you have anymore left?

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #37 on: September 29, 2011, 01:37:28 am »
I'm glad soldering worked well.  :) Yep, I have 7 encoders left.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #38 on: September 29, 2011, 10:26:11 am »
I'd really love to find something, and I am seriously looking into it. I understand why some would want an $80-150 spinner, but there has got to be some alternative out there. It's a metal shaft with an encoder. A ball mouse has a more similar encoder board, and they can be found at the dollar store.

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10315
  • Last login:June 23, 2022, 07:02:21 pm
  • boom
    • Arcade Madness
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #39 on: September 29, 2011, 10:26:55 am »
Vigo!  Have anymore?  Check pm, please...   ;D

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #40 on: September 29, 2011, 11:17:13 am »
PM responded!  :afro:

And I do have a few more left.  :cheers:

jmike

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1017
  • Last login:April 26, 2022, 10:53:01 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #41 on: September 29, 2011, 12:11:20 pm »
I call dibs on the last one (that is when the other are sold)   ;D
« Last Edit: September 29, 2011, 12:18:05 pm by jmike »

The Habbler

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 47
  • Last login:March 16, 2017, 02:40:31 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #42 on: September 29, 2011, 06:29:00 pm »
Paid for the board on Sunday and got it in the mail yesterday on Wednesday. Tried to swap it in to my madcatz TE stick and it worked. Going to use the 2 boards I got for some side by side fighting mame goodness.

jmike

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1017
  • Last login:April 26, 2022, 10:53:01 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #43 on: September 29, 2011, 08:18:29 pm »
This thing rocks! Simple plug and play. Vigo gets an A+ for packing. For under $15 bucks you can't go wrong. PM Sent.  ;D

 :cheers:
« Last Edit: September 30, 2011, 07:32:40 am by jmike »

jggamer

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13
  • Last login:February 16, 2012, 08:40:25 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #44 on: October 01, 2011, 04:36:28 pm »
Awesome, paid late Tuesday and arrived on Friday...Thanks     ;D

tho

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • Last login:June 04, 2021, 06:09:47 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #45 on: October 03, 2011, 10:12:52 am »
Got mine in the mail over the weekend.  Thanks again!

TD

SNAAKE

  • Trade Count: (+29)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3504
  • Last login:Yesterday at 03:31:27 pm
  • my joystick is bigger than your joystick !
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #46 on: October 05, 2011, 01:48:55 pm »
got mine works fine and cheap cheap! :cheers:

whats the button mapping for ps3 again ???
« Last Edit: October 05, 2011, 01:52:47 pm by SNAAKE »

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #47 on: October 06, 2011, 12:59:56 pm »
Hey Snaake! The button mapping is actually in small print on the back of the board. K11 and K12 are the buttons when you push in the analog stick. For reference though, the buttons from left to right are: Triangle, Circle, X, Square, L2, R2, L1, R1, Select, Start, Left Analog button, Right Analog button. The joystick inputs on the top are in order of Up, Down, Right, Left.




SNAAKE

  • Trade Count: (+29)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3504
  • Last login:Yesterday at 03:31:27 pm
  • my joystick is bigger than your joystick !
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #48 on: October 06, 2011, 01:47:43 pm »
apparently I am blind :hissy:

lolthx

Kowalik

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 7
  • Last login:December 20, 2011, 12:16:15 am
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #49 on: October 06, 2011, 09:04:41 pm »
Any left i would like to buy one... sent a pm last week no reply. maybe i sent it wrong.
please let me know how i can order. Thanks

portugese pirate

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 84
  • Last login:December 07, 2019, 05:51:25 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #50 on: October 07, 2011, 08:31:42 pm »
+1 on finding a spinner alternative

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13916
  • Last login:Yesterday at 08:41:46 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #51 on: October 08, 2011, 11:10:12 pm »
Can you hold one for me? Im stuck in Taiwan till 10/17
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #52 on: October 09, 2011, 12:29:24 pm »
Hey Malenko, I have one left, and it is all yours. Just let me know when you are ready to pay. Oh, and according to my wife, there is no such thing as "stuck in Taiwan"  ;) 
Enjoy the rest of your trip!


For anyone else looking to purchase, my wife is currently working with a friend in Taiwan who has a China bank account. We are hoping to get some more of these while avoiding outlandish purchasing agent fees. If we can get this deal going, it would be worth it for us to continue to sell some goods for a while longer. We might also pick up a few different items as well. Stay tuned!

Well Fed Games

  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1884
  • Last login:March 06, 2022, 07:30:46 pm
  • Delicious!
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #53 on: October 09, 2011, 02:02:59 pm »
We are hoping to get some more of these while avoiding outlandish purchasing agent fees. If we can get this deal going, it would be worth it for us to continue to sell some goods for a while longer. We might also pick up a few different items as well.

That would be awesome!  :notworthy:
Completed projects: Pac bartop (Plug & Play), 30th Anniversary Pac cab (MAME), Point Blank (PS1), Centipede (arcade hardware- light restore), VS. Super Mario Bros (arcade hardware- light restore) Tetris Cocktail (SNES), Arcade Classics upright (60-in-1, then MAME), Multi-Raiden (arcade hardware). Pac Man vs.(Gamecube),

Working on: Pinball Re-theme, Homebrew arcade arena shooter

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13916
  • Last login:Yesterday at 08:41:46 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #54 on: October 10, 2011, 10:57:01 am »
I can pay whenever, I just dont want you to ship it and me not be there to get it =)

While Im in Taiwan, you need anything?
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #55 on: October 10, 2011, 10:55:07 pm »
Hey, thanks for the offer. The in-law came to visit a couple months ago, so I am pretty stocked up on Taiwan goods. I appreciate it though! BTW, what part of Taiwan you at?

As for the payment, there is no rush. I will PM you the payment instructions, but take your time.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13916
  • Last login:Yesterday at 08:41:46 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #56 on: October 11, 2011, 06:37:32 am »
I was in Hualien most of the time, now Im in Taipei; pretty much gonna stay here till I go home.  I'll paypal you as soon as I get on a connection I half way trust =)
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

Lilwolf

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4942
  • Last login:April 04, 2021, 01:38:50 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #57 on: October 13, 2011, 08:40:41 am »
getting any more?  I completely missed this and would love one.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13916
  • Last login:Yesterday at 08:41:46 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #58 on: October 13, 2011, 11:48:13 am »
payment sent, I sent you $15 just in case paypal tried to take some and for holding it. no rush on shipping it, I wont be home till the 17th anyway.  Thanks again!
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #59 on: October 13, 2011, 12:18:36 pm »
Thanks! I received the payment. I will hold off on sending for now but try to time the package to come in on the 17th or 18th. Oh, Congrats one being one post away from 5000.


I was in Hualien most of the time, now Im in Taipei; pretty much gonna stay here till I go home.

Nice, I haven't been to the East side of Taiwan, next time I can get to Taiwan, I will definitely be visiting that area. Most my time has been in the south, around Tainan and Kaohsiung.


getting any more?  I completely missed this and would love one.

I may just have had an order ship out from China last night....  ;)
« Last Edit: October 13, 2011, 12:20:16 pm by Vigo »

Louis Tully

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1800
  • Last login:February 13, 2015, 09:41:03 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #60 on: October 23, 2011, 09:14:37 am »
.
« Last Edit: February 12, 2015, 05:01:26 am by Louis Tully »

jmike

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1017
  • Last login:April 26, 2022, 10:53:01 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #61 on: October 24, 2011, 08:12:14 am »
 :applaud:  :applaud:
      So when is the next shipment suppose to arrive?  ;D



 :cheers:

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #62 on: October 24, 2011, 05:40:26 pm »
On a mountain of encoders, in the castle of games, he sits on a throne of roms. What games have been, will be once more. Now is the season of MAMEing.



Thanks for the fast shipping, man. These encoders are pretty sweet.


Buy with confidence folks.


-L

Hahahaha! Thanks, Louis!!  :cheers:

:applaud:  :applaud:
      So when is the next shipment suppose to arrive?  ;D



 :cheers:

Actually, I got a new shipment in already, I just have been busy. I will post it back up shortly, as I now will be offering an option with extra wires.  8)

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10315
  • Last login:June 23, 2022, 07:02:21 pm
  • boom
    • Arcade Madness
Re: FS: Arcade Control Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #63 on: October 25, 2011, 09:48:49 am »
Maybe you should give a couple to your neighbors...  just sayin...  :burgerking:

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
OK, Boards are back in stock, with some improvements. See my updated first post for details.

Here is the short version of the update

  • Boards are back
  • They are still $14.75, but now the board comes will all .187 terminals, meaning that they are wider and accept most joysticks and switches
  • I am now offering additional wires for people who want to utilize 12 buttons instead of 8. The cost for the board with the extra wires is $17.50
  • People who have already made a board purchase and want additional wires can get them from me for $3.50 shipped per set.

PM me if you are interested! Be sure to let me know if you are interested in the version with the extra wires or not.

Thanks!!
Vigo

CUTWEST

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 28
  • Last login:May 05, 2015, 07:19:58 pm
I have a question, do these boards have a 5volt area so that optical joysticks like the Sanwa flash, Happ/Wico P360, etc can work properly?
and as regards to the PS3, do they have a Button to activate "Home"?

either way. PM SENT!
« Last Edit: November 06, 2011, 08:38:56 pm by CUTWEST »

CUTWEST

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 28
  • Last login:May 05, 2015, 07:19:58 pm
I have a question, do these boards have a 5volt area so that optical joysticks like the Sanwa flash, Happ/Wico P360, etc can work properly?
and as regards to the PS3, do they have a Button to activate "Home"?

either way. PM SENT!
« Last Edit: November 06, 2011, 08:39:14 pm by CUTWEST »

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
I have a question, do these boards have a 5volt area so that optical joysticks like the Sanwa flash, Happ/Wico P360, etc can work properly?
and as regards to the PS3, do they have a Button to activate "Home"?

either way. PM SENT!

PM responded.  8)

These don't have anything for an optical joystick.It doesn't have anything to activate home on the PS3 either as far as I can tell. I'll check with the manufacturer next time I need to place an order to see if they have anything that would fit those needs better. If I find anything, I will definitely let you know!

CUTWEST

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 28
  • Last login:May 05, 2015, 07:19:58 pm
I just linked all your info too the shoryuken forums...prepare to be bum bared with sales.

NiteWalker

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 792
  • Last login:April 25, 2022, 07:33:24 pm
  • Routers can do anything.
    • SimpleCase Custom Arcade Stick Enclosures
Sending PM. :)
I wanna mess with one of these.  :cheers:



It's 9am. I'm calling it a nite.

jmike

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1017
  • Last login:April 26, 2022, 10:53:01 pm
PM sent.


 :cheers:

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4794
  • Last login:April 10, 2022, 09:48:19 pm
Personal Message Sent!

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Just a heads up. I have another shipment of these board in stock.

Also, I have a brand-spanking new product that came in as well. After I finish my product testing is completed, I will give you the scoop on it. :)

JT

amendonz

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 503
  • Last login:December 02, 2017, 04:33:57 pm
has your contact said anything about developing a X360 version?

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
You ever figure out a way to simulate pressing the PS Home button with these things on a PS3?


I know I am letting the cat out of the bag early here, but this product does solve that problem.  :cheers:


has your contact said anything about developing a X360 version?

He hasn't mentioned anything, but I will ask him next time I talk to him. I will see if it is on his radar.

amendonz

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 503
  • Last login:December 02, 2017, 04:33:57 pm
cool cheers, might as well ask about a dual pcb (x360/ps3) while you're at it
thanks

rveiga

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:February 04, 2014, 04:40:48 pm
Hi, vigo , please i'm need more information about rapidfire option and autofire options in "ZD Encoder Boards with wiring" and if shipping to Brazil - MG  - Belo horizonte and cost. thanks. i can't send to you pm. I'm blocked. :-[

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Hi Reviga,

I think there is a 10 post minimum needed before you can send a pm. I will just give you the information right here.

I calculated the cost for you, with the added shipping and crossboarder fee, the total cost for the encoder would be $18.00 exact. If you are interested in buying, just post here. I will send you a pm for payment instructions.

For the Rapidfire and Autofire options, I will just paste in what I put in the instructions. If you still have questions on it, feel free to ask. :)

Quote
Special Function Keys:

If you wish, you may set up buttons for special Functions. These are the four ports on the right side of the board. Connect your button to these ports the same way that you would connect any button.

MODE: Press this button to switch your controls over to POV Hat mode. Common used function for flight
simulator games or other games where changing point of view is helpful. When pushed, it will change the
joystick controls (up, down, left, right) to a second set of controls to map to. Pushing the button again will
return the joystick to standard controls

TURBO: This will turn your button presses to turbo rapid fire mode. To use, hold down the turbo button
and press the button you wish to have on turbo. Now when you push that button, the button stroke will be a
rapid fire. You may use this function on as many buttons as you want at once.

AUTO: This is like rapid fire, but when you put a button in Auto mode, it will keep the button in rapid fire
without you even pushing the button. To use, hold down the auto button and press the button you wish to
have on auto. As soon as you turn the button on auto, it will continue to rapidly fire until you turn it off. You may use this function on as many buttons as you want at once.

CLR: The Clear Function is used to turn off the turbo and auto functions. To clear turbo or auto on any
button, hold down the clear button and push the button you wish to remove auto or turbo from. Repeat this
process for every button that you want to have cleared.

Thanks!
Vigo
« Last Edit: December 13, 2011, 10:35:14 am by Vigo »

rveiga

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:February 04, 2014, 04:40:48 pm
Vigo Hello, yes I am interested in 2 units with 12 buttons, please send me a PM, to close the deal.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Hi Rveiga,

PM sent. There is the extra cost for the additional button wires, and the shipping is slightly different with two boards, but the final price is in the PM. Let me know if you have any questions!

Thanks!
Vigo

rveiga

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:February 04, 2014, 04:40:48 pm
Vigo, what is these items that are circled in red, can add more buttons??

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
I honestly don't know the technical side of the open slots on this board, but I did get a chance to speak with the guy who designed the board last night. The slots are just there for possible future revisions, but this board is set with a 12 button limit on it. I don't know if that could be changed or not.

Hope that helps.

trotty

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:January 09, 2012, 07:50:35 am
Hi guys, I bought one of these from ebay a few weeks back after reading the original thread on their discovery - it turned up yesterday.
I finally got around to having a play with it today, and wondered if anyone had had any luck changing the config settings. Namely the default hat/pivot selection on startup.
Currently the Red LED is default, but would like it to boot straight to the green LED to avoid having to run another (Mode) switch if possible.

I have had a look through the properties section in the device manager, and I imagine its just a 0 value that needs changing to 1 somewhere, but lack of info on these boards is making it tough.


Thanks in advance

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Thanks, Jim! I haven't heard back from anyone having any issues with the board, but that at least does seem pretty basic of a problem, thankfully. Although it can sometimes be hard to see that stuff visually, I will check over the solder points of what I got on hand.  :cheers:

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Just checking, has anyone tried this board with ubuntu/linux? I tried checking this out, but I quickly realized i don't have a clue when it comes to getting things working on ubuntu.

I am assuming it works fine, since the device just reads as a generic HID usb gamepad, but I would love to know for sure.

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10315
  • Last login:June 23, 2022, 07:02:21 pm
  • boom
    • Arcade Madness
Send me one, I'll test it on my Lubuntu box for ya...   >:D

IG-88

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2040
  • Last login:June 27, 2022, 08:23:58 pm
  • Posts: 48,764
Hey Vigo! Got any more of these in stock?
"I know what a HAL 9000 is... I was wondering if HAL 7600 was his retarded cousin or something..."
-HarumaN

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Yep, I do!  8)

Just shoot me a PM with what you want, I can send you payment info after I get your order.  :cheers:

soggybranflakes

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:April 27, 2014, 11:44:07 am
I'm interested in purchasing one of these boards, but first I need to know many simultaneous button presses it can handle.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
It should be fine there; I have had all the buttons pressed at once with no problems.

soggybranflakes

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:April 27, 2014, 11:44:07 am
Well thanks, that sounds great to me.
I'll take one then, although I can't send PMs yet.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Awesome! I will PM you the payment information.  :cheers:

elkameleon

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 528
  • Last login:August 20, 2014, 08:31:00 pm
I love the product, I just wanna say, the included wires could be a taaaaaaaaaaaad longer. My cp is barely 20 inches in length, and them buttons on the far ends are hanging on for dear life to them wires, and my board is mounted in the middle... just sayin'

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Yeah, I hear ya there. The wires come in only one length, I asked the manufacturer. The current length works hunky dory for setups where the joystick and buttons are in normal placement, but when there are control panels that spread out over a wider space or have admin buttons off to the side, it stretches things out to the limit. The best fix is to build a few extensions, buy a package of male and female .187 quick connects at the hardware store, and crimp one of each on to a length of wire. Make a few of those and attach them on the end of the existing wires that are stretched out.

elkameleon

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 528
  • Last login:August 20, 2014, 08:31:00 pm
That's my plan for the ones going to the coin door, otherwise the other wires just barely made it to their destinations. :cheers: 12 inches really should be the norm, these clock in at just under 8".

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13916
  • Last login:Yesterday at 08:41:46 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
vigo!   hey guy can you send me 4 of the wires for buttons? I cant find any of mine. I'll pay for them of course, I also wanna snag those NES buttons if you still have them. PM your paypal
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
vigo!   hey guy can you send me 4 of the wires for buttons? I cant find any of mine. I'll pay for them of course, I also wanna snag those NES buttons if you still have them. PM your paypal

No problem, Malenko! Let me just check the weight to be sure no surprises in the shipping cost and I will PM you in a few hours.

Jgel

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 27
  • Last login:August 03, 2012, 08:02:55 pm
PM sent, not sure it you got it or not.  Just checking in case you didn't  :dunno

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
PM sent, not sure it you got it or not.  Just checking in case you didn't  :dunno
Yes, I have more in stock. PM replied. Thanks!

DrChek

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 219
  • Last login:June 21, 2022, 02:18:47 pm
PM sent.

Violet Son

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • Last login:July 25, 2013, 03:20:07 pm
I'm interested in purchasing one.  Can you please PM me the details for purchasing?  Thank you.

jmike

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1017
  • Last login:April 26, 2022, 10:53:01 pm
Will need another set (2) in the near future. Did your new shipment come in yet Vigo?
Also any more of those NES on/reset buttons?

 :cheers:
« Last Edit: May 12, 2012, 07:52:04 am by jmike »

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Violet sun, jmike,

I am still waiting for my new shipment to arrive, I hope around the 17th is not too long of a wait! I will PM you both when they arrive.

jmike, I have NES buttons in stock as well. I'll hook you up!  :cheers:

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2534
  • Last login:June 30, 2022, 05:04:57 pm
  • SHMUP'EM
Pm sent, will glady wait on your next shipment

Violet Son

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • Last login:July 25, 2013, 03:20:07 pm
No prob, I'm a few weeks away from starting on my cp.  Thanks!

pyra1212

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:June 16, 2012, 09:01:43 pm
Hey Vigo could you pm me also when the shipment arrives,  I can't pm people yet

thanks

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
No Problem, Will do!

BurgerKingDiamond

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 690
  • Last login:July 01, 2021, 11:12:14 am
Hi.  Vigo do you have stock right now?

-Welcome to the Fantasy Zone.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Right now, I only have the ReMatch boards on hand. Shipment of the regular ZD encoders is still not in. Judging from my tracking, it will probably be in Saturday or Monday now. I can let you know when they come in.
« Last Edit: May 16, 2012, 07:13:07 pm by Vigo »

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
We are now back in stock!  :cheers:

PM's sent to all the patient people waiting on the shipment! Thanks!

pyra1212

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:June 16, 2012, 09:01:43 pm
just received mine. that was pretty fast.  now i gotta wait for my buttons to come in.  thanks Vigo

Violet Son

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • Last login:July 25, 2013, 03:20:07 pm
Ordered on Monday and got mine today (Wednesday) in MI.  Thanks!

IG-88

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2040
  • Last login:June 27, 2022, 08:23:58 pm
  • Posts: 48,764
Hey Vigo. Am trying to set up a CP with one of these nifty little encoders and I have a question. How the heck does one get the Esc button to work with one of these? I'm using it for mame with mala as a FE but for the life of me I cannot get this figured out. You have any advice? Or anyone else for that matter?
"I know what a HAL 9000 is... I was wondering if HAL 7600 was his retarded cousin or something..."
-HarumaN

IG-88

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2040
  • Last login:June 27, 2022, 08:23:58 pm
  • Posts: 48,764
...Vigo?
"I know what a HAL 9000 is... I was wondering if HAL 7600 was his retarded cousin or something..."
-HarumaN

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Oop! Sorry, I somehow had it in my mind that I responded to you. I must be going senile.  :dizzy:

You can remap the exit button in Mame with a press of a button or a combination of buttons. Just while in game, hit tab on the keyboard, goto the "Input (general)" option, then "User Interface" then you should see the quit is mapped to the esc button. (I think they call quit "UI Cancel").  You can remap this to be whatever button you want from the encoder. If you push more than one at once, it will know to quit only when you push both buttons. I have mine set to quit when I push both "Coin" and "start" at the same time.

I don't know if you are using other emulators as well, but there is a method you can use if you come across a pesky emulator that won't let you remap the escape button. Just download Joy2Key. It is a small program that runs in the background and translates joystick presses into keyboard inputs. You can set a button to equal ESC or whatever button is needed to exit your emulator, then leave the program to start up with your computer. You can also use Xpadder, and it has some awesome advanced features, but it does cost like $10. Joy2Key is free.

Hope that answer is what you are looking for. Let me know if you need anything else. Again, sorry for the delayed response. :cheers:


fvargasfrank

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10
  • Last login:March 22, 2022, 10:23:34 am
Hello I would like to buy one of these I just have a few question, I'm new to building mame, is there any big difference to j-PAC? I have two joystick with 4 bottom each also a 1 and 2 player bottom and may two coin bottom, will I need only one of these or two? Can two be connected if I decide to build a 4 player?

Thank you

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Hello I would like to buy one of these I just have a few question, I'm new to building mame, is there any big difference to j-PAC? I have two joystick with 4 bottom each also a 1 and 2 player bottom and may two coin bottom, will I need only one of these or two? Can two be connected if I decide to build a 4 player?

Thank you

Sorry for the late reply. PM Sent.  ;)

SpeedyArcade

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:July 11, 2012, 06:57:18 pm
I am trying to purchase a ZD Encoder along with the extra wires. I have a paypal acct but I need to know how to proceed. I am a new member and was restricted to send a personal message. Also do you have any buttons for sale and how much would they cost ?

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
I just sent you a PM with payment instructions. Thanks! Let me know if you have any questions.  :cheers:

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
I am trying to purchase a ZD Encoder along with the extra wires. I have a paypal acct but I need to know how to proceed. I am a new member and was restricted to send a personal message. Also do you have any buttons for sale and how much would they cost ?

I do not have any buttons for sale at this time.  8)

codeena

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 216
  • Last login:Today at 02:13:58 pm
  • This site is cool
PM Sent, thank you

IG-88

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2040
  • Last login:June 27, 2022, 08:23:58 pm
  • Posts: 48,764
Oop! Sorry, I somehow had it in my mind that I responded to you. I must be going senile.  :dizzy:

You can remap the exit button in Mame with a press of a button or a combination of buttons. Just while in game, hit tab on the keyboard, goto the "Input (general)" option, then "User Interface" then you should see the quit is mapped to the esc button. (I think they call quit "UI Cancel").  You can remap this to be whatever button you want from the encoder. If you push more than one at once, it will know to quit only when you push both buttons. I have mine set to quit when I push both "Coin" and "start" at the same time.



Cool thanks! Found it. Now, how do I get Mame to remember what I set the esc button too? Every time I exit out of the program and go back in its "re-mapped" to the default of the "esc" button again. 
"I know what a HAL 9000 is... I was wondering if HAL 7600 was his retarded cousin or something..."
-HarumaN

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
That's strange. Is your mame.ini file set as 'read only'? That's the only thing that I can think of.

IG-88

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2040
  • Last login:June 27, 2022, 08:23:58 pm
  • Posts: 48,764
I probably should move this over to the software forum. I don't have a mame.ini file. I got a MAME32.ini and a MAME32ui.ini  Both of which are not set to "read only" I have a sinking feeling its something to do with WIN 7 that I am running on this machine. I have been reading some bad stories on how 7 likes to screw with these and other system type files....
"I know what a HAL 9000 is... I was wondering if HAL 7600 was his retarded cousin or something..."
-HarumaN

JdotFite

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:March 22, 2021, 08:38:21 pm
Vigo, can you PM with payment instructions please!  I will be taking one off your hands.

Thanks,
Justin

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Vigo, can you PM with payment instructions please!  I will be taking one off your hands.

Thanks,
Justin

PM replied! Thanks!

noidea

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:July 21, 2012, 11:37:47 am
Hey, i am also interested in one of these, could you send me a message on how much the (cheapest) shipping to germany would cost?

thanks in advance.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Hey, i am also interested in one of these, could you send me a message on how much the (cheapest) shipping to germany would cost?

thanks in advance.
PM replied. Thanks!

gonzojoey

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 166
  • Last login:August 30, 2020, 10:26:44 am
PM Sent.
thanks!

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
I'm on it!  8)

Brian74

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1089
  • Last login:June 04, 2022, 09:46:31 am
  • Yep... I built that!!
Hey Vigo, do you have a encoder that can be used with the ps3 and the 360?
         

gtxjoe

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
  • Last login:March 29, 2022, 04:31:53 pm
Please PM me with purchase information.  I haven't been on the forum in ages so I had to create a new account and I can't PM yet.

thanks,
Joe

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Hey Vigo, do you have a encoder that can be used with the ps3 and the 360?

Nothing right now. The guy I work with who produces these boards does currently do some 360 stuff, but nothing I will sell. They are not super cost effective, and Haruman does a good job with gamepad hacks. I have pressed him for a combo PC / PS3 / 360 board though, and he might be making something down the road. Nothing in the immediate future though.

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10315
  • Last login:June 23, 2022, 07:02:21 pm
  • boom
    • Arcade Madness
Haruman does a good job with gamepad hacks.

Why, thank you!  :cheers:

Greener

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:August 02, 2012, 06:08:40 am
I would like to purchase a ZD Encoder board with 4 joystick wires and 12 button wires, but I am not able to PM.  Can you please PM me the purchase info?  Thanks.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
I would like to purchase a ZD Encoder board with 4 joystick wires and 12 button wires, but I am not able to PM.  Can you please PM me the purchase info?  Thanks.
PM replied! Thanks!

Moo

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:July 27, 2015, 01:00:46 pm
Hi Vigo,

I'm interested in a ZD board or 2 but can't PM yet. I'm planning 2 fight sticks with japanese sticks and buttons, PC only and not sure if I should go with the ReMatch or not.

Thanks

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Hello Moo,

If you are going with PC only, you can probably just use the regular ZD encoder instead of the ReMatch. Save some money there. I am guessing since you are looking to build fight sticks, you would want to order the extra button wires though, so that you can have 12 buttons instead of 8. However, the ReMatch does have a longer USB cable, in case that is important to you.

I can also swap in .110 wires for the Regular ZD encoder for Japanese buttons, as well as the 5-pin harness if that is the type of joystick you are using.

If you are interesting or have questions let me know. I can sent you a PM so you can reply to me directly.

jigz

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:September 02, 2013, 12:18:40 am
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #138 on: August 03, 2012, 04:32:37 pm »
Looks like my account is to new to PM you - if you could shoot me the info for one with all 12 wires that would be great.  I plan on using a JLF as well as Japanese buttons if that makes a difference in connector ends.

Thanks!

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #139 on: August 06, 2012, 12:59:49 am »
Looks like my account is to new to PM you - if you could shoot me the info for one with all 12 wires that would be great.  I plan on using a JLF as well as Japanese buttons if that makes a difference in connector ends.

Thanks!

PM Replied. You can reply directly to my PM or just reply on this thread. Thanks.

m3nk111a

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:September 07, 2012, 06:39:30 pm
  • Want a beautiful arcade stick box under 60$? PM me
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #140 on: August 12, 2012, 12:29:35 am »
Hey Vigo replay me! im too new to PM you, but i want a ZD Rematch with 12 wires and .110 connectors.
We need more girls in the FGC, so stop being an a*****E to them.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #141 on: August 13, 2012, 03:23:48 pm »
Hey Vigo replay me! im too new to PM you, but i want a ZD Rematch with 12 wires and .110 connectors.

PM Replied.

coorslight

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 40
  • Last login:November 16, 2018, 11:57:55 am
  • Kiss My Asphalt
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #142 on: August 15, 2012, 06:25:03 pm »
PM sent Thanks!

P.H.U.

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 219
  • Last login:August 25, 2020, 07:55:47 pm
  • I own my own arcade machines. Word.
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #143 on: August 16, 2012, 05:18:51 pm »
Hi Vigo;

3 Things.

First, got the encoder boards in 4 days!  Thanks!
Secondly, where do I go to add to your seller rep?

and lastly......

Here is the tricky thing, I am powering a Happ P360 stick which require 5 volts.  I was wondering of the ZD Remate has connector pins for that?  I am hoping I don' t have to draw it from a separate USB slot but will do it if I have to.  Thanks!
When you find great deals on Craigslist for CRT based cabs, exuberance :laugh2: can be a bad thing!


Current Status of Cabs:  2-of-11 (and counting) working as desired  :applaud: :applaud:/:banghead: :banghead::banghead::banghead::banghead::banghead::banghead::banghead::banghead:

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #144 on: August 18, 2012, 06:26:00 pm »
Hey P.H.U.

Thanks! I'm glad you got them quickly. Sorry my reply is a slow though.

I think seller rep is temporarily out of commission while the forum is being updated. I am think it will come back but I am not sure when. I think normally it is just clicking the rep number by the persons name and then clicking a link that says add seller rep.

For the 5 volts on the P360, I think the ZD Rematch can be used but I honestly don't know the current draw from it. I am guessing the 360 would not draw so much that the ZD would have trouble powering itself, but that would be a possibility. You can try the tapping into the two upper most unused soldering points on the left of the board. I believe they are the auxiliary 5v points. I think that would be the best spot to use.

Jellyman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:December 15, 2012, 12:56:19 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #145 on: August 21, 2012, 02:00:54 am »
Please send me payment information for 2 ZD Encoders.  Let me know if there are any special instructions for installing 2.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #146 on: August 21, 2012, 02:31:29 pm »
Please send me payment information for 2 ZD Encoders.  Let me know if there are any special instructions for installing 2.

PM replied. Thanks!

Jellyman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:December 15, 2012, 12:56:19 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #147 on: August 21, 2012, 03:32:05 pm »
Vigo,
Thanks for the quick reply.  Since I can't reply to your PM yet, can you resend the payment info for 2 encoders + (2)12 wiresets and I plan to use cc from paypal.  I will cover the pp fees, so add that to the total too please.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #148 on: August 21, 2012, 04:12:47 pm »
Vigo,
Thanks for the quick reply.  Since I can't reply to your PM yet, can you resend the payment info for 2 encoders + (2)12 wiresets and I plan to use cc from paypal.  I will cover the pp fees, so add that to the total too please.

No problem. Replied.

Jellyman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:December 15, 2012, 12:56:19 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #149 on: August 21, 2012, 04:20:53 pm »
Payment sent.  Thanks Vigo!

Jellyman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:December 15, 2012, 12:56:19 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #150 on: August 23, 2012, 12:29:35 pm »
Wow, that came quick. :)  Great packing job too.  Thanks again!!!  Now, I'm just waiting for GGG to send my parts.

[maxx]

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:May 27, 2013, 05:26:02 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #151 on: August 30, 2012, 03:55:07 pm »
Hi Vigo, sorry if I write here but I can't (or probably simply don't understand how) send you a PM.
I'm very interested in this item, I would like to know shipping costs to Italy. Thank you!

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #152 on: August 30, 2012, 04:23:17 pm »
Hi Vigo, sorry if I write here but I can't (or probably simply don't understand how) send you a PM.
I'm very interested in this item, I would like to know shipping costs to Italy. Thank you!

PM replied. Thanks.

[maxx]

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:May 27, 2013, 05:26:02 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #153 on: August 31, 2012, 09:02:10 am »
you've got PM  ;D
« Last Edit: August 31, 2012, 09:18:52 am by [maxx] »

jbaker

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:September 07, 2012, 03:57:22 pm
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #154 on: September 02, 2012, 12:53:26 pm »
i would like one of your encoder boards  but the site wont let me pm you it says im not allowed to go there maby i dont have enough post or somthing  please pm me your paypal address for payment.  thanks

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #155 on: September 02, 2012, 10:19:28 pm »
i would like one of your encoder boards  but the site wont let me pm you it says im not allowed to go there maby i dont have enough post or somthing  please pm me your paypal address for payment.  thanks

PM replied. Thanks!

helioelias

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:September 13, 2012, 07:53:10 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #156 on: September 05, 2012, 11:40:49 pm »
Vigo How buy this, i can send the ZD ReMatch to Brazil ?


thks´s
Helio Elias

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #157 on: September 06, 2012, 12:32:55 am »
Vigo How buy this, i can send the ZD ReMatch to Brazil ?


thks´s
Helio Elias
PM replied. Thanks!

helioelias

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:September 13, 2012, 07:53:10 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #158 on: September 06, 2012, 06:58:35 am »
Vigo i cannot send PM ("An Error Has Occurred! You are not allowed to send personal messages."), I am new user,  my e-mail is helioelias@gmail.com, i can send instructions to payment in my e-mail, please

I want the ZD Rematch

thks,
Helio Elias

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #159 on: September 06, 2012, 02:40:24 pm »
Vigo i cannot send PM ("An Error Has Occurred! You are not allowed to send personal messages."), I am new user,  my e-mail is helioelias@gmail.com, i can send instructions to payment in my e-mail, please

I want the ZD Rematch

thks,
Helio Elias

PM replied. Thanks!

fluentd

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 72
  • Last login:October 20, 2014, 07:30:41 pm
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #160 on: September 06, 2012, 08:57:12 pm »
Hey is it possible to create a 4 player Mame setup with these boards?

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #161 on: September 07, 2012, 12:06:15 am »
Yes, you can. You can have multiple of these in at the same time. I have personally used 4 of these at a time with no problems. If you are not using too many buttons for player 3 and 4, you might even be able to squeeze it all in with 3 encoders.

The only pitfall you could run into is that if you unplug and plug these back in while playing, it can change around the order of the players, which happens with most USB joystick devices. Under normal cabinet use, you would be leaving them plugged in all the time have no problems.

I just wanted to point it out since I have had a person use these for 2 player cabinets, with plug in and out add on controls for players 3 and 4. He was popping in and out during use, and the USB orders screwed up when doing so. It took tweaking to get the right encoders aligned with the right USB ID#'s so that he plug in player 3 and 4 without it affecting the order of player 1 and 2.

blackjudas

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:September 20, 2012, 08:30:22 pm
  • Rockin' it out in Canuckistan!
    • My Blog
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #162 on: September 13, 2012, 06:25:20 pm »
Seems like I can't PM either, I'd be interested in finding out if there's a flat rate for shipping to Canada or is it smarter for me just to use your ebay listing?
I type this out every time....

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #163 on: September 13, 2012, 07:40:29 pm »
Hello,

I give international shipping at cost here. It should generally be cheaper through here directly than through ebay. I will PM you with a quote.

FYI, I only have one left in inventory until my next shipment comes in about a week from now. If you want more than one, it will take a little longer. Thanks!

blackjudas

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:September 20, 2012, 08:30:22 pm
  • Rockin' it out in Canuckistan!
    • My Blog
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #164 on: September 13, 2012, 11:18:50 pm »
Hello,

I give international shipping at cost here. It should generally be cheaper through here directly than through ebay. I will PM you with a quote.

FYI, I only have one left in inventory until my next shipment comes in about a week from now. If you want more than one, it will take a little longer. Thanks!

Hi Vigo,

Thanks for the PM, seems I can't even respond to one, understandable anti-spam measures.  Well you've got me convinced, I'll take two, let me know through a PM when you have your next shipment as I'm in no magic rush.  For two, is the price different or simply multiply the amount by 2?

Thanks!
I type this out every time....

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #165 on: September 14, 2012, 01:04:35 am »
It will be a little bit cheaper for each since I can combine the shipping for the two. I sent you a second PM with your new quote. Thanks!

sq1ne

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:October 24, 2012, 07:28:09 pm
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #166 on: October 03, 2012, 05:31:43 pm »
Hi there,
How many of these boards would I need if I were to do a set up for 2 player, street fighter style?

(2) 8 way joysticks
(2) push buttons

player 1, player 2 coins
restart, select

Anything else I've missed?

Thanks,

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #167 on: October 04, 2012, 09:30:22 am »
Hi Sq1ne,

These boards come standard with enough wires for the joystick and 8 buttons, with the option of buying 4 more button wires ($3 extra).

With your setup, it sounds like you would want 9-10 buttons for each player. You would want to order 2 encoder boards, and one extra wire set.

Let me know if you are interested and I will send you a PM with the payment instructions.

Thanks!
Vigo

sq1ne

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:October 24, 2012, 07:28:09 pm
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #168 on: October 04, 2012, 06:01:21 pm »
Yes,
Please send me a PM with instructions for payment.
Thanks,

manurag

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:October 22, 2012, 01:06:47 pm
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #169 on: October 07, 2012, 12:47:30 pm »
Want to buy ZD encoder . Can it be shipped to india .If yes,Can u please send me the quote including the shipping charges at anurag.makol@gmail.com

I will be thankful.


Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #170 on: October 07, 2012, 03:05:37 pm »
Want to buy ZD encoder . Can it be shipped to india .If yes,Can u please send me the quote including the shipping charges at anurag.makol@gmail.com

I will be thankful.
Email replied. Thanks!

virtvic

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:September 22, 2013, 06:54:07 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #171 on: October 07, 2012, 06:53:09 pm »
Hi there, Vigo - I'd be interested in buying a pcb, can you pm me please as I can not message you for some reason (because I am new to this forum?)

cheers

V

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #172 on: October 07, 2012, 07:09:54 pm »
Hi there, Vigo - I'd be interested in buying a pcb, can you pm me please as I can not message you for some reason (because I am new to this forum?)

cheers

V

PM replied. Thanks!

DAWORM

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:October 12, 2012, 05:11:31 pm
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #173 on: October 12, 2012, 04:30:26 pm »
After 1 year of researching and wishing ~ Its time to get off the pot and build me a stick.   Vigo I would like to buy a ZD Rematch ~ Im using Happ Buttons and a Zippyy Joystick (so the American size wires should work)

Please send me a message ~ Time to start building !!!

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #174 on: October 12, 2012, 04:32:34 pm »
After 1 year of researching and wishing ~ Its time to get off the pot and build me a stick.   Vigo I would like to buy a ZD Rematch ~ Im using Happ Buttons and a Zippyy Joystick (so the American size wires should work)

Please send me a message ~ Time to start building !!!
PM replied. Thanks!

RyoriNoTetsujin

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 542
  • Last login:June 25, 2022, 08:56:25 am
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #175 on: October 15, 2012, 09:53:16 am »
PM sent.  ;D

RyoriNoTetsujin

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 542
  • Last login:June 25, 2022, 08:56:25 am
Received my 2 boards yesterday. :w00t Installed last night, cleaned up the cables a bit this morning.

They're replacing an iPac4 (with a PS3 adapter that still isn't working the way I need it to, despite Andy's best efforts to repair it ... ???) and they're doing a great job on both PC and PS3. Thanks Vigo!

Now, that said:
Hi guys, I bought one of these from ebay a few weeks back after reading the original thread on their discovery - it turned up yesterday.
I finally got around to having a play with it today, and wondered if anyone had had any luck changing the config settings. Namely the default hat/pivot selection on startup.
Currently the Red LED is default, but would like it to boot straight to the green LED to avoid having to run another (Mode) switch if possible.

I have had a look through the properties section in the device manager, and I imagine its just a 0 value that needs changing to 1 somewhere, but lack of info on these boards is making it tough.


Thanks in advance

Any information on this? PS3 only recognizes the POV hat as a D-pad for fighting games (SF4, TTT2, etc.). I've got a couple of spare buttons rigged up and hanging out the back of my CP for now, but a permanent boot solution would be really, really ideal.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #177 on: October 23, 2012, 11:13:15 pm »
Awesome! I'm glad it's working out for you! In regards to booting in POV hat mode, I will check in with the guy who makes it. It will be a few days before I get the chance to ask him, but I'm hoping he has an answer.  8)

esmith13

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:April 07, 2022, 09:27:26 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #178 on: October 25, 2012, 02:44:57 pm »
Hi Vigo,

New user here and like everyone else I can't PM.
I would like to order one of these with wires for all 12 buttons ( not just 8 ) if it doesn't bring the total  to over $20.00

Thanks in advance,


Eric
« Last Edit: October 25, 2012, 02:48:46 pm by esmith13 »

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #179 on: October 25, 2012, 04:45:05 pm »
Hi Vigo,

New user here and like everyone else I can't PM.
I would like to order one of these with wires for all 12 buttons ( not just 8 ) if it doesn't bring the total  to over $20.00

Thanks in advance,


Eric

Not a problem. PM replied. If you're not USA, please let me know so I can give you a shipping quote. Thanks!

esmith13

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:April 07, 2022, 09:27:26 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #180 on: October 25, 2012, 06:27:21 pm »
Payment Sent!! Thank you, sir!!


Eric

burncycle

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:December 31, 2013, 11:52:49 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #181 on: November 01, 2012, 12:50:00 pm »
Hey,
I am also new to this also. I was looking to get one of your boards instead of a I-pac. I want to set up a 4 player mame. can you send me a PM also I'm in MN also could I possibly pick up ?

thanks in advance 

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #182 on: November 01, 2012, 01:10:19 pm »
Hey,
I am also new to this also. I was looking to get one of your boards instead of a I-pac. I want to set up a 4 player mame. can you send me a PM also I'm in MN also could I possibly pick up ?

thanks in advance

PM replied! Thanks!

burncycle

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:December 31, 2013, 11:52:49 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #183 on: November 01, 2012, 01:43:29 pm »
Got your PM but I can not reply to it yet. question? can you run two encoders to have 4 players ??

phearly

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • Last login:November 14, 2012, 12:55:00 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #184 on: November 02, 2012, 01:08:21 am »
Hi,
    I am wanting to build a 2-player Hyperspin cabinet setup(2 sticks, 6 action buttons each & a few other buttons) and would like to purchase 1 or two of your boards. I can't seem to PM you to set it up(maybe because I am new to the forum???). I am looking to get started building ASAP. Thanks

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #185 on: November 02, 2012, 12:34:56 pm »
Hi,
    I am wanting to build a 2-player Hyperspin cabinet setup(2 sticks, 6 action buttons each & a few other buttons) and would like to purchase 1 or two of your boards. I can't seem to PM you to set it up(maybe because I am new to the forum???). I am looking to get started building ASAP. Thanks

PM replied. Thanks!

jpS14

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 40
  • Last login:October 23, 2021, 03:32:35 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #186 on: November 07, 2012, 02:48:59 pm »
Got my ZD encoder a few days ago. Works great and shipping was super fast! Thanks Vigo   :applaud:

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #187 on: November 07, 2012, 03:56:11 pm »
Great! I'm glad you got it so quickly. Let me know if any questions come up!

ace_1989

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:November 26, 2012, 12:20:37 pm
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #188 on: November 07, 2012, 06:39:07 pm »
HI! I want to order this encoder of yours but i am in Philippines..

How much would it cost if shipping cost  is included?
Is this for 1player only? 
Can i connect coin slot on this board

My setup: 2-player
6 action buttons for each player
2 sticks

« Last Edit: November 07, 2012, 06:45:05 pm by ace_1989 »

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13916
  • Last login:Yesterday at 08:41:46 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #189 on: November 07, 2012, 09:10:08 pm »
Vigo, my man I'm assuming you still have these in stock, I might need a few, will these work with perfect 360 sticks? They require a common ground so I'm assuming I can tie all the top (or bottom) wires together and be good to go?
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #190 on: November 08, 2012, 12:48:13 pm »
HI! I want to order this encoder of yours but i am in Philippines..

How much would it cost if shipping cost  is included?
Is this for 1player only? 
Can i connect coin slot on this board

My setup: 2-player
6 action buttons for each player
2 sticks
PM replied. Thanks!

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #191 on: November 08, 2012, 01:06:08 pm »
Vigo, my man I'm assuming you still have these in stock, I might need a few, will these work with perfect 360 sticks? They require a common ground so I'm assuming I can tie all the top (or bottom) wires together and be good to go?

Hey Malenko! Yep, I got these in stock. To be honest, I have never wired a perfect 360 to it. I looked it over and think it should work. The directional inputs are all be common ground. The sanwa joystick port on there is common ground as well. I don't see it as being an issue, but I just never tried.

DracoDan

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13
  • Last login:February 27, 2019, 09:55:31 am
  • I want to build my own arcade controls!
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #192 on: November 16, 2012, 05:29:09 pm »
After looking through all the different choices out there, I've made the easy decision to go with a pair of these for my arcade cabinet.  Like so many others, I'm new here so I can't send PMs.  Shoot me a PM or email me @gmail.com

Thanks!

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #193 on: November 17, 2012, 01:16:58 am »
After looking through all the different choices out there, I've made the easy decision to go with a pair of these for my arcade cabinet.  Like so many others, I'm new here so I can't send PMs.  Shoot me a PM or email me @gmail.com

Thanks!

PM replied. Thanks!

adder

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 640
  • Last login:February 04, 2021, 10:51:51 am
  • Location: Easy St.
Re: FS: Back in stock! ZD Encoder Boards with wiring: $14.75 shipped. [USA/MN]
« Reply #194 on: November 21, 2012, 08:35:06 pm »

VIGO,  pm sent..  i think.... (the message is not in my sent items folder.. anyway let me know if you get my pm, thanks :lol)

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7827
  • Last login:Yesterday at 08:44:42 pm
Aww crap. I need 4 of these. I'll keep checking for when you come back online, but if anybody has one or two they'd like to sell shoot me a PM.

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7827
  • Last login:Yesterday at 08:44:42 pm
We in stock yet? Also, can someone point me to connectors that work with Cherry switches?

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13916
  • Last login:Yesterday at 08:41:46 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
We in stock yet? Also, can someone point me to connectors that work with Cherry switches?

it IS February in Australia.
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

toopack2

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:February 28, 2013, 10:57:36 pm
  • I want to build my own arcade controls!
I am new to gaming and a member recommended me to get this encoder board from you for my joystick.  I do not know much so it might sound silly to some, is this board like a converting board that I see in some joystick kit that you allow you to plug in computer's USB port?  Can I do the JAMMA harness with this board?  Too much to learn.
Thank you

AjunNg

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:February 07, 2013, 08:54:49 pm
  • I want to build my own arcade controls!
Looking to buy one of these. Would want the normal or the Rematch, whichever is first available.
If Vigo could PM me the cost to London United Kingdom, it would be great!
Not enough posts to send PMs yet.

rtkiii

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 288
  • Last login:March 16, 2022, 02:55:49 pm
  • Ready to Build! Not building? Making Movies!
    • RTKIII Productions YouTube Channel
I have been looking at the IPAC4 for a 4 person mame machine I am working on.  That has 64 pins or something like that and have programmable inputs for save states and what not.  Can this device do that?  Also do the settings stick when the PC is powered off?
Thanks,
Rich
« Last Edit: February 06, 2013, 12:59:31 pm by rtkiii »

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13916
  • Last login:Yesterday at 08:41:46 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
I have been looking at the IPAC4 for a 4 person mame machine I am working on.  That has 64 pins or something like that and have programmable inputs for save states and what not.  Can this device do that?  Also do the settings stick when the PC is powered off?
Thanks,
Rich

its not a keyboard encoder. When you plug it in the computer sees it as a game pad. You can use a program like joy2key to map button presses on the keypad to keyboard inputs.
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7827
  • Last login:Yesterday at 08:44:42 pm
Are you back yet?  :P

griffindodd

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1433
  • Last login:October 02, 2014, 12:04:03 pm
  • Old Account, now posting as 'Maximus'
    • Arcade Icons
Vigo, come back to us man, I needz an encoder!!!  >:D

JDFan

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3448
  • Last login:March 18, 2022, 01:51:44 pm
  • I want to build my own arcade controls!
 :dunno Still no word on a restock date ??  :dunno His profile keeps sayin he has checked in that day but no posts since Dec 03 - so guess the vacation is lasting a bit longer than he originally expected but you'd think he would at least update the thread if he is indeed logging in to the site !
« Last Edit: March 13, 2013, 10:02:50 am by JDFan »

Nephasth

  • Guest
  • Trade Count: (0)
Patience, Vigo's good people.

JDFan

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3448
  • Last login:March 18, 2022, 01:51:44 pm
  • I want to build my own arcade controls!
Patience, Vigo's good people.

No doubt ! - seeing that his pricing on these is what makes people wait for any word on availability (he's definitely not making a killing oon them) and can understand that he is out of the country visiting family so things can get extended but if he is logging into the site every day (unless the profile page is auto logging him in ) you'd think a few seconds to update with an ETA would be posted just so we'd know whether to wait or search out other options.

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
I'm back. I'm sorry to keep everyone hanging. I have an announcement today of the status of ZD encoders.

http://forum.arcadecontrols.com/index.php/topic,131037.0.html

Thank you for waiting on me, but I will not be selling anymore. Feel free to hunt down the encoder on eBay though. It is easy to find, and the price is cheap.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19877
  • Last login:Today at 06:29:30 pm
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
VIGO! Missed you, bro!  :cheers:
***Build what you dig, bro. Build what you dig.***

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6415
  • Last login:Yesterday at 04:14:17 pm
Hey! Thanks a lot yotsuya! It's good to be back.  :woot