Main > Main Forum
Make your own super silent switches, with video
(1/2) > >>
equlizer:
I decided to make my own "versa micro switches" with existing "E-switches" i had (they are quite loud)  Use a 9/64 drill bit and drill through the side like the picture shows.  Grab some 5/64 hex socket screws (got mine from local hobby store) and screw down to desired "loudness"

EDIT:  Found some smaller hex set screws (3/16) and then used a 1/8 drill bit.  These are a bit less intrusive




MajorHavoc:
Nice work.  :applaud: I'm impressed by the difference.  Does the mod affect the performance of the switches?
equlizer:
They respond much quicker.  I also have some of the micro leaf switches and the modded ones are almost comparable cept you cant put micro leaf in a joystick  :timebomb:

Ond:

--- Quote from: equlizer on September 18, 2011, 12:41:44 am --- I also have some of the micro leaf switches and the modded ones are almost comparable cept you cant put micro leaf in a joystick  :timebomb:



--- End quote ---

Yes you can, see my mod for how to do that here....... http://forum.arcadecontrols.com/index.php?PHPSESSID=6dc8a2747fafb0ad2b1f0a686e1b9da6&topic=95361.0

equlizer:
umm i dont see anywhere in that thread you using micro leaf switches in a joystick. 
This is the micro leaf: http://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=73&products_id=309
Navigation
Message Index
Next page

Go to full version