Arcade Collecting > Pinball

Playmatic Chance MPU Problem

<< < (10/15) > >>

DarkSide:
http://edesigns.dk/pins/droptarget.m4v Short video.

Yes i know the playfield is dirty :)

TopJimmyCooks:
Awesome.   Nothing like some results.  :cheers:

PBJ's an asset to this forum for the acerbic wit.  (Oh, and the pinball repair tips, too.)

DarkSide:
Found the last two legs for the machine, and got it mounted, also took a few fast games and the machine works.

Still got a few lamps that does not work, and the plunger is not good either, i think the spring has gotten to weak.

DarkSide:
Well not all is good, it happens a bit to often that the relays triggers an extra time, and the machine thinks its the 2 or 3 ball, when its really the first.

If its a relay fault, or something else, that i dont know yet.

DarkSide:
You was right, it was that switch, but i do have a bad relay will need to get that changed.

Cleaned the plunger. but its still not good, half the time it does not work.

Will try and order one of those coils, just to have a spare, blew out a fuse today because of a bad connection, got that fixed, also fixed the sound, but i think i will disconnect that again :)

Navigation

[0] Message Index

[#] Next page

[*] Previous page