| Main > Main Forum |
| local Asteroids cab. / connection methods for swappable CP's |
| << < (2/15) > >> |
| opt2not:
Those corners look too damaged for simple bondo to fix. You'll probably need to cut off that one corner (the worst one) and replace it with a piece of wood, using dowels, glue and wood-filler to secure and smooth over. The rust on the CP can be removed by scraping it with a wire-wheel in your drill chuck, then you can just repaint/seal it and get a replacement CPO -- unless you know someone that can silkscreen it back to original. There are no pictures of the side art condition, but given that you've got a lot of corner work needed for the sides, you might need to get new side art that will cost you over $100 (gameongrafix has the set for $189.00). IMO, even if you could get this for $25, there's way too much work and cost involved in getting it to a decent shape. Probably run you close to $500 in costs and labour. I'd pass on it entirely and find a better conditioned cabinet to Mame. |
| Louis Tully:
. |
| Louis Tully:
. |
| Q*Bert_OP:
And you've got a Bally/Stern pinball MPU board in there too :cheers: |
| yotsuya:
I paid $60 for my first gutted cab, $30 for the second one. You'd spend at least $100 for cabinet grade wood. Have fun with it! |
| Navigation |
| Message Index |
| Next page |
| Previous page |