Main > Consoles

DC controller of choice (for hacking)

<< < (2/2)

Frostillicus:

--- Quote from: gnateye on September 09, 2003, 04:50:13 pm ---madkatz dreampad, the 6 button style, hands down, if you find the older models, all the holes ae already in the pcb, no drilling, just stick the wire thru the hole and solder, i find them at gamestop all the time cheap, and ebgames has them too.


--- End quote ---

"drilling"? What would you need to drill on a non-madcatz pad - you're just soldering wires onto them.

gnateye:
i drill thru the pcb and hte contact then slip the wire thru from the back make for very secure and clean soldering job, i dont like soldering directly onto the contact, i have broken too make solder joints taht way.

infariot25:
i bought the whole lot of purple colored 3rd party dc controllers from my local toys r us.  I got 6 brand new ones at $5 each.  they were marked 10 like you said but they were only 5 at the register. So i say do a price check.  
I have sucessfully hacked one(5 are left).  the ones i got were harder to hack because up/down and left/right shared the same contact but used different grounds.  I believe its the exact same thing as on this site (http://members.cox.net/joysticks/)    
its the DC dream master pad.
refer to the site if i am unclear.

good luck

gnateye:
that sounds really confusing...

Navigation

[0] Message Index

[*] Previous page