| Main > Main Forum |
| UltraStik 360 is acting weird, is this a hardware or software issue? |
| (1/2) > >> |
| upper2bits:
Brand new, one works great one wont go fully to the right. :censored: Is this normal, is there something wrong with it? |
| Crono22:
Ya seems normal, I have the same problem with one of my ultrastiks. Its the magnet itself hitting the metal bracket. I dont use analog I have all the ultrastiks setup for 8way 4way etc. So a slight movement to UPR registers. Try moving the joystick very slowly and see if it will reach all the way. |
| upper2bits:
--- Quote from: Crono22 on August 17, 2011, 05:13:04 pm ---Ya seems normal, I have the same problem with one of my ultrastiks. Its the magnet itself hitting the metal bracket. I dont use analog I have all the ultrastiks setup for 8way 4way etc. So a slight movement to UPR registers. Try moving the joystick very slowly and see if it will reach all the way. --- End quote --- I have mine set to 8way too and that's what I started looking into it. I was trying to play fighter games and I couldn't go diagonal so I started looking into it and switched my joysticks and the other one works fine. |
| DashRendar:
There was a known issue with the little ring that goes around the stick. Some people were getting little shavings coming off that which was causing the symptom you're describing. I think Andy changed the materials to address that. There's a number of threads on BYOAC about this. Anyway, that might be what you're running into. |
| syph007:
None of the four I've owned do that. I'd ask Andy, he's pretty quick to respond to emails. |
| Navigation |
| Message Index |
| Next page |